00:00The next step, we will be able to do this.
00:12This is either a four or eight.
00:17The purpose of this is to homogenize,
00:25It's just like this one.
00:29Since it's not a big deal,
00:32when you have a lot of work together,
00:36it's just like this one.
00:38But this one is going to be able to do it.
00:40Then, further cleaning.
00:42Then, it's going to be able to do it.
00:45There are requirements for every machine.
00:49So, we need to do it like this one.
00:52We need to set it to the machine.
00:54Let's do it.
01:24So from there,
01:28sa salang system,
01:30makikita nyo po parehas yun.
01:32Drafting system yan.
01:34Nungin yan, at saka yun.
01:44Ito na.
01:46Ito na.
01:48Ito na.
01:50Ito na yun.
01:52Nakagawa na tayong sinulid.
01:54Ito muna mo yun.
01:56Nakagawa na tayong sinulid.
01:58Na transfer natin.
02:00Ito yung winding machine.
02:02This one.
02:04Wala tayong bagay.
02:06So yung nakikita.
02:08Ito yung nakikita.
02:10Ito yung nakikita.
02:12Ito yung winding machine.
02:14This one.
02:16Wala tayong bagay.
02:18So yung nakikita nyo yun.
02:20May bobbin.
02:22Ito transfer niya para maging foam.
02:24Dito kasi ginawa na namin.
02:26Nakabubinan.
02:28Ito yung twisted.
02:30Ito yung winding machine.
02:32So lahat ng mga dito nakita nyo.
02:34Nakaspindle yun.
02:36Ito transfer nyo muna para maging ganyan.
02:38Para mawala yung fiber na kanyan.
02:40No, hindi naman.
02:42Kasi gramo lang yun eh.
02:44Pero spindle.
02:46Ang lampong gano'n.
02:48Magbibingan ito.
02:50Ganito kasi yung binibenta sa market.
02:52Isang sinulit.
02:54Isang sinulit.
02:56At ito.
02:58Ano'y anong pinatapos.
03:00Ang lamin.
03:02Ang lamin.
03:04Ang lamin.
03:06Ang lamin.
03:08Ang lamin.
03:10Ang lamin.
03:12Ang lamin.
03:14we are still working on the machine
03:21because we are working on the machine
03:24we are working on the machine
03:26we are working on the machine
03:44we are working on the machine
04:04we are working on the machine
04:08we are working on the machine
Comments