Bremsscheiben Messen / Zustand Prüfen | Tutorial - video Dailymotion

tuningblog

😇 Dein Abo hilft uns: https://tublo.eu/abonnieren  ➡️ Mehr Infos: www.tuningblog.eu  Bremsscheiben sind ein sicherheitsrelevantes Bauteil und sollten regelmäßig auf Verschleiß überprüft werden. In diesem Tutorial zeigen wir dir Schritt für Schritt, wie du den Zustand deiner Bremsscheiben richtig messen und beurteilen kannst – ganz einfach selbst zuhause.  Du erfährst: - welche Werkzeuge du brauchst - wie du die Mindestdicke richtig abliest - woran du erkennst, ob deine Bremsscheiben noch sicher sind - wann ein Wechsel notwendig ist  Mit praktischen Tipps und klaren Erklärungen ist dieses Video ideal für alle, die ihre Fahrzeugwartung selbst in die Hand nehmen wollen.  🔧 Sicherheit beginnt bei den Bremsen – also leg los und schau rein!  #bremsscheiben,#bremsen,#autowartung,#diyauto,#fahrzeugsicherheit,#tutorial,#autopflege #tuningblog - das Magazin für Auto-Tuning und Mobilität!

Transcript

00:00Hello on the tuning blog channel.

00:02Today, for a special reason.

00:06I recently published a video about changing the brakes on this vehicle.

00:11Um, it was on the front axle, it's been a while now, but there were quite a few comments.

00:17Among other things, there was a comment about how to measure the brake discs,

00:21because they have this degree on the outside.

00:24You can see it here, right? I hope I can get it right.

00:29The upper part develops a degree over time and it's difficult to measure it with a caliper.

00:36This one here does have a small indentation, which might just be enough to measure the degree correctly.

00:43Um, but there's a trick.

00:45Um, I can show you, it's really simple.

00:48Of course, the wheel has to come off first.

00:52Okay, the wheel is off and you can see that on this one,

00:55I hope you can see that there are small indentations up here.

00:58Um, they pretty much match the one with the degree.

01:03That means I can measure it relatively easily with it.

01:06It actually fits exactly, works wonderfully.

01:09However, there are also plenty of calipers where that's not the case or the degree is now stronger.

01:14Then the result will definitely be falsified.

01:17Um, my idea for this is to simply take 2 coins.

01:21Um, you have to see which ones you take.

01:24But these are actually 5 cent coins.

01:26So, they are definitely stronger than the one on the disc.

01:30And you simply place them once on the outside and once on the inside.

01:36Now I'm probably covering the camera with my hand, but I'm sure you know what I mean.

01:42So, that's how you measure it, right?

01:45I hope you can see that now.

01:51And it's fixed.

01:54Now you can pull it off, coins fall down.

01:57And now you have the measurement, no, in this case I don't know.

02:02I think it's 25 millimeters.

02:06And then you simply take the coins and then measure the diameter of the coin, right?

02:12So here one has 2 millimeters, yeah, something like that, right?

02:18Uh, and then you simply subtract it from the coins.

02:22It's actually quite simple, that way you have the optimal measurement.

02:26And that's basically it.

02:28Just a little tip on the side, if it helped you.

02:31Leave a subscription and see you in the next video.

02:34For more videos, just subscribe.

Bremsscheiben Messen / Zustand Prüfen | Tutorial

Kategorie

Transkript

Schreibe den ersten Kommentar

Empfohlen