How to Install Model 3 Performance Wheel Spacers? - BONOSS Tesla Accessories - video Dailymotion

BONOSS Wheel Spacers Grace

Are you interested in upgrading your Tesla Model 3 Performance with wheel spacers but worried about making installation mistakes? In this video, we’ll demonstrate the proper installation process to help you avoid common issues like wheel vibration and uneven wear.  We will walk you through the process step by step to ensure a safe and proper installation. Before we begin, make sure you have the following tools and materials.  - A jack and jack stands - A wheel lug wrench - A torque wrench - An impact wrench - A wire brush or sandpaper You will also need a set of hub-centric wheel spacers that match your Tesla Model 3 Performance's bolt pattern, hub bore, and desired thickness.  #bonoss #teslamodel3 #wheelspacers #bloxsport  🔜Click Here to get the BONOSS Tesla wheel spacers.  (If you like extreme driving and drifting, then we recommend 7075-t6 wheel spacers. If it is just for daily driving, then 6061-t6 spacers are enough.)  🔜Tesla Model 3 Wheel Spacers/ Tesla Model 3 Wheel Spacers Performance:  AL6061-T6: https://www.bonoss.com/product/bonoss-forged-active-cooling-hubcentric-wheel-spacers-al6061-t6-pcd5x114-3-cb64-1-for-tesla-model-3-performance-2018 AL7075-t6: https://www.bonoss.com/product/bonoss-forged-active-cooling-hubcentric-wheel-spacers-al7075-t6-pcd5x114-3-cb64-1-for-tesla-model-3-performance-2018  All BONOSS Tesla Accessories: https://www.bonoss.com/vehicles/tesla/  How to Install Model 3 Performance Wheel Spacers? - BONOSS Tesla Accessories  📄Information: Work on: Tesla Model 3/ Tesla Model 3 Performance Product: BONOSS Forged Active Cooling Wheel Spacers(formerly bloxsport) Material: Aluminum Alloy 6061-T6/7075-T6 Thickness: 15-50mm  (Hi, I’m Grace. For a better user experience, this article is original content uploaded by humans. It is not generated by Artificial intelligence (AI) Models or tools.)

Transcript

00:00Tesla Model 3 wheel spacers are safe to use as long as the wheel spacers are installed correctly.

00:05Using a cross-banner to loosen the lug nut on the wheel side in a diagonal sequence,

00:10but do not remove them altogether. The better safety measure would be placing

00:15jack stand to support each end of the car. Using a cross-banner to remove lug nut on the wheel side.

00:23Remove the wheel of the hub and set it to the side.

00:26Look at the wheel hub assembly for rust. You can use a brake cleaner to remove them.

00:32Remove any rust and dirt from the wheel hub with a rug.

00:36Widen the entire surface to ensure it is smooth.

00:39Because all of that surface may cause the wheel spacer to not fit perfectly with the hub.

00:44Install the bonus forged FT cooling Tesla Model 3 wheel spacers. Then install the matching lug nut.

00:50A key advantage of bonus Tesla Model 3 wheel spacers is the FT cooling feature.

00:57These wheel spacers are designed with petal-striped grooves.

01:00The grooves allow the external cold air to flow continuously inside the spacer when it rotates.

01:06The air takes away the heat, aptly dissipating heat for the braking system.

01:11Take a look at these Tesla Model 3 wheel spacers now.

01:14Tighten them with a torque wrench. Install the ring and then install the stock nut.

01:22Use a cross-banner to tighten them on the wheel. Make sure they are secure.

01:27Remove the jack stand. Slowly lower the car until the tars fully touch the ground.

01:33And remove the jack.

01:35Use a torque spanner to tighten the lug nut to the specific torque.

01:39Always tighten them in a diagonal sequence. This will ensure that the lug nuts work.

01:45The same operation is done for the remaining wheels.

01:48Bonus recommend checking the use of the wheel spacers every 6 months.

01:52And checking the vehicle operation to ensure safe driving.

01:56Let's see what is the difference after installing the Tesla Model 3 wheel spacers.

02:01The Tesla wheel spacers pushed the wheel out slightly, giving it a more spooty look.

02:17The Tesla device has the new vehicle entry.

02:23Davies in thestad sûr.

02:25The Tesla Л stop.

02:28Andarbeit itself buying.

02:29The Teslaине has the seated langsam czasie.

02:33Take the rope up and take the puck basically.

02:35With the US and the twoceny tab on the order, support the reducing your who wentE дос gespanntates night.

02:40Turn on here on your 팔 over thepositionNO4365 carry on there 0-1672.

02:42And thisות semblance.

How to Install Model 3 Performance Wheel Spacers? - BONOSS Tesla Accessories

Category

Transcript

Be the first to comment

Recommended