F80 M3 spacers can provide the necessary clearance to ensure that your new wheels fit properly and do not rub against the suspension or wheel well. Many people use BMW F80 M3 spacers to achieve a flush style and boost performance. As long as you correctly torque the BMW M3 wheel spacers, you can safely and confidently drive with them.
#bmwm3f80 #bonoss #wheelspacers #bloxsport
🔜Click Here to get the BONOSS Forged Lightweight Plus Wheel Spacers for your BMW M3 G80. 3mm-20mm: AL6061: https://www.bonoss.com/product/bonoss-forged-lightweight-plus-wheel-spacers-al6061-t6-pcd5x120-cb72-5-for-bmw-m3-f80-2014-2018 AL7075: https://www.bonoss.com/product/bonoss-forged-lightweight-plus-wheel-spacers-al7075-t6-pcd5x120-cb72-5-for-bmw-m3-f80-2014-2018
🔜All BONOSS BMW M3 F80 Aftermarket Parts and Accessories: https://www.bonoss.com/vehicles/f30-f31-f34-f35-f80-12-18/?product_cat=wheel-spacers
How to Install F80 M3 Spacers Correctly and Safely (Step-by-Step Guide) - BONOSS BMW Parts
📄Information: Vehicle: BMW M3 F80 Product: BONOSS Forged Lightweight Plus Wheel Spacers(formerly bloxsport) Material: Aluminum Alloy 6061-T6/7075-T6 All Thickness: 3mm-20mm
(Hi, I’m Grace. For a better user experience, this article is original content uploaded by humans. It is not generated by Artificial intelligence (AI) Models or tools.)
00:00A great way to improve the performance and appearance of your M3 F80 is by installing BMW spacers.
00:08However, it is important to choose the right type of M3 spacers and ensure that they are installed correctly to avoid any negative effects.
00:20Let's take a look at the proper installation steps.
00:23Using a cross-range loosen the stock bolt in a diagonal sequence, but do not remove then combulate.
00:29Using jet stand to support each end of the car is a better safety measure.
00:34To assist in removing the wheel hub, use a cross-range to remove the stock bolt.
00:39Install a wheel hanger, remove the wheel of the hub, and set it to the side.
00:44You can use a brake cleaner to remove them.
00:47Remove any rust and dirt from the wheel hub with a rug.
00:50Widen the entire surface to ensure it is smooth, because all of that surface may cause the wheel spacer to not fit perfectly with the hub.
00:58Install the bonus for the lightweight plus wheel spacers.
01:02Then install the wheel hanger.
01:04A key advantage of the bonus M3 spacers is the lightweight plus feature.
01:10The benefits of the lightweight plus design are that the hollow design is further optimized based on traditional M3 spacers.
01:19It is an effective design that can reduce weight and energy consumption, and improve handling while ensuring safety and reliability.
01:29In addition, high-precision M3 spacers provide high-surface integrity, effectively guarantee safety, stability, and reliability, and ensure a smooth installation experience.
01:43Install the rim and then install the standing wheel bolt.
01:47Use a torque wrench to tighten them on a wheel.
01:50Make sure they are secure.
01:52Remove the jack stands.
01:54Slowly lower the car until the tire is fully touched the ground, and remove the jack.
01:59Use a torque wrench to tighten the standing wheel bolt to the specific torque.
02:04Always tighten them in a diagonal sequence.
02:06This will ensure that the standing wheel bolt work.
02:10The same operation is done for the remaining wheels.
02:13Bonus recommends tracking the use of the BMW M3 spacers every 6 months and tracking the vehicle operation to ensure safe driving.
Be the first to comment