How to Install Tesla Model S Spacers? Like a Professional! - BONOSS Tesla Wheel Parts - video Dailymotion

BONOSS Wheel Spacers Grace

Installing Tesla Model S spacers is an easy way to achieve a more aggressive stance and accommodate larger tires. With the right preparation and tools, you can install them like a pro in just a few hours. In this video, we’ll walk you through the entire process, step by step. We'll also explain why BONOSS wheel spacers are the best choice for Tesla Model S.  #teslamodels #bonoss #wheelspacers #bloxsport  🔜Click Here to get the BONOSS Tesla wheel spacers.  (If you like extreme driving and drifting, then we recommend 7075-t6 wheel spacers. If it is just for daily driving, then 6061-t6 spacers are enough.)  🔜Tesla Model S Wheel Spacers:  AL6061-T6: https://www.bonoss.com/product/bonoss-forged-active-cooling-hubcentric-wheel-spacers-pcd5x120-cb64-1-al6061-t6-for-tesla-model-s AL7075-t6: https://www.bonoss.com/product/bonoss-forged-active-cooling-hubcentric-wheel-spacers-pcd5x120-cb64-1-al7075-t6-for-tesla-model-s  How to Install Tesla Model S Spacers? Like a Professional! - BONOSS Tesla Wheel Parts  📄Information: Work on: ALL Tesla Model S Product: BONOSS Forged Active Cooling Wheel Spacers(formerly bloxsport) Material: Aluminum Alloy 6061-T6/7075-T6 Thickness: 15-50mm  (Hi, I’m Grace. For a better user experience, this article is original content uploaded by humans. It is not generated by Artificial intelligence (AI) Models or tools.)

Transcript

00:00A great way to improve the performance and appearance of your Tesla Model X is by installing

00:06wheel spacers. However, it is important to choose the one type of Tesla spacers and ensure that

00:14they are installed correctly. To avoid any negative effects, let's take a look at the correct

00:20installation steps. Losing the little nut on the side of the wheel in a diagonal sequence,

00:26but do not remove them completely. Using jets to support each end of the car is a better safety

00:33measure. Use a cross wrench to remove the wheel side like that. Remove the wheel of the hub and set it to

00:40the side. Look at the wheel hub assembly for rust. You can use a brake cleaner to remove them. Remove

00:47any rust and dirt from the wheel hub with a grug. Widen the entire surface to ensure it is smooth,

00:53because all of that surface may cause the wheel spacer to not fit perfectly with the hub.

00:58Install the bonus forged FT cooling wheel spacers. Then install the machine lug nut. Tighten them

01:04with a torque wrench. A key advantage of bonus wheel spacers is the FT cooling feature.

01:10These wheel spacers are designed with petal-shaped grooves. The grooves allow this tonal cold air to

01:16flow continuously inside the wheel spacer rail rotates. The air takes away the heat. After the

01:22dissipating heat for the braking system, all bonus wheel spacers are forged. In addition,

01:28high-precision wheel spacers provide high-surface integrity, effectively guarantee safety, stability,

01:34and reliability, and ensure small installing experience. Install the ring and then install the

01:40stock nut. Use a torque wrench to loosen them on the wheel. Make sure they are secure. Remove the jack

01:47stance. Slowly lower the car until the test fully touch the ground and remove the jack. Use a torque

01:54wrench to tighten the lug nuts to a specific torque. Always tighten them in a diagonal sequence. This will

02:00ensure that the lug nuts work. The same operation is done for remaining wheels. Bonus recommend checking

02:07the use of the wheel spacers every 6 months and checking the vehicle's operation to ensure safe driving.

How to Install Tesla Model S Spacers? Like a Professional! - BONOSS Tesla Wheel Parts

Category

Transcript

Be the first to comment

Recommended