00:00Assalamualaikum
00:02This is E7 Carrier
00:04It is a higher kit
00:06The problem was
00:08that the PCB
00:10was burnt
00:12from the bottom
00:14Now
00:16the PCB cannot be kept
00:18and many components
00:20were burnt from the bottom
00:22Many things were burnt
00:24It was difficult to repair
00:26It came from far
00:28to repair
00:30This E7 Carrier
00:32came
00:34The main problem
00:36was that it was difficult
00:38to repair
00:40It was shown in some places
00:42and they said that it cannot be repaired
00:44I can show you from the back
00:46It is a burnt kit
00:48from here
00:50The SMD is also burnt
00:52The SMD is also burnt
00:54They tried to repair it
00:56but it could not be repaired
00:58We have made a
01:00separate supply
01:02and installed it
01:04The supply is installed
01:06The kit is on
01:08It will help
01:10in the future
01:12The cost of repair
01:14will be less
01:16and it will not be damaged
01:18quickly
01:20The microprocessor
01:22is also
01:2499%
01:26useful
01:28It is less likely to burn
01:30The probe
01:32was also burnt
01:34It was also a
01:36error
01:38We had one kit
01:40I removed it
01:42and installed it
01:44Now
01:46we will do two parts
01:48of this movie
01:50We will tell you
01:52how to make a complete supply
01:54and install it
01:56Now we will
01:58run it
02:00and show you
02:02the voltage
02:04If you
02:06like our video
02:08then subscribe
02:10to our channel
02:12and like the video
02:14Thank you
02:16The problem is
02:18that we have installed
02:20everything
02:22and sensors
02:24I will tell you one more thing
02:26This is for the people
02:28who are working
02:30This sensor
02:32was not installed
02:34We have installed
02:36a lot of sensors
02:38You can see the
02:40resistance
02:42We will install the
02:44resistance and
02:46check the kit
02:48We will run it
02:50and show you
02:52The error of 7 is removed
02:54and the kit is working
02:58I have turned it on
03:00The motor is on
03:02The motor is on
03:04The communication is also
03:06working
03:08We have made a separate supply
03:10and installed it
03:12We have made a separate supply
03:14and installed it
03:16The kit is on
03:18We will show you
03:20the complete view
03:22The compressor is on
03:24I will show you
03:26If any brother
03:28is interested in learning
03:30or working
03:32or any friend
03:34who is interested in learning
03:36can contact us
03:38We can teach him work
03:40He can learn work
03:42The compressor is on
03:44The compressor is on
03:46I will show you
03:48It will not run for a long time
03:50because the heat sink is not installed
03:52The circuit is open
03:54We can't run it for a long time
03:56It will be on
03:58We will turn it off
04:00The room temperature
04:02is showing
04:04It will be on
04:06I will show you
04:08The compressor is on
04:10The compressor is on
04:12See
04:14See
04:16The compressor is on
04:18It's on
04:20It's on
04:22The motor is on
04:24Off
04:26Off
04:28The motor is on
04:30Look
04:32The motor is on
04:34Look
04:36The motor is on
04:38Here
04:40It has a lot more life.
04:42Its microprocessor is also not bad.
04:44It can be fast.
04:46It is also beneficial.
04:48And the biggest benefit is that
04:50this ampere will also control quickly.
04:52If you like my video,
04:54then like and share it.
04:56And subscribe to the channel.
04:58And also like it.
05:00And if any brother wants to learn work,
05:02then he can contact us.
05:04Thank you for watching the video.
05:06But this was part 1 video.
05:08Inshallah soon I will make
05:10a video on how to make
05:12a jay crash.
05:14Khuda Hafiz.
Comments