00:00As-salamu alaykum.
00:02After As-salamu alaykum,
00:04the first thing is that
00:06you have to watch the
00:08entire video that I am making for you.
00:10There is some error in the kit.
00:12I don't know what the error is,
00:14but whatever happens to the kit,
00:16I will tell you completely
00:18without your off-camera,
00:20I will tell you 100%
00:22how to repair it.
00:24Look at this, I have removed
00:26200,000 of it.
00:28After that,
00:30the kit came like this.
00:32I have opened it in front of you.
00:34One screw is here,
00:36and another one is here.
00:38But the video should not be long.
00:40When I remove the screw,
00:42I will turn off the camera.
00:44Because the video should not be long,
00:46but you have to watch the entire video.
00:48Now,
00:50look at this,
00:52there is a lock here.
00:54I have opened it.
00:56Now we will remove the kit
00:58and see what the problem is.
01:02We remove the kit
01:04from the box.
01:06So that it is free from the box.
01:08Then we will see
01:10what the problem is.
01:18I am telling you again and again
01:20that you have to watch the entire video.
01:22If you watch the entire video,
01:24then you will understand everything
01:26that what are the faults in the kit.
01:28And what are the problems in it.
01:30And how you have to check it.
01:32Now we have put these wires.
01:34This is inside it.
01:36I will try to tell you everything.
01:38This is the lock.
01:40You have seen this video before.
01:42How can a strong lock
01:44come out?
01:46If the lock is not pressed,
01:48how will the wire come out?
01:50All the drama of these people,
01:52see,
01:54the wire is so strong
01:56that these wires are coming out
01:58with great difficulty.
02:00So how will it come out?
02:02Now we have to remove these wires.
02:04We will put it here.
02:06This is written L.
02:08This is L and this is N.
02:10We will give voltage to it in series.
02:12And these are the wires of the reactor.
02:14We will put this reactor.
02:16This wire,
02:18it does not have a reverse side.
02:20Because it is the same color.
02:22Whether you put it on this side or not.
02:24Often it comes in our kit to be repaired.
02:26So there is a drop in it.
02:28So remember,
02:30there is no problem on it.
02:32There is no need to put a drop.
02:34You can put it as you like.
02:36Just try to do this lock side.
02:38If it is on the outside side,
02:40you can easily remove it.
02:42Now we have put it.
02:44Now I will give it a supply.
02:46See this,
02:48this is the same way.
02:50I will put it here.
02:52Now I put one on L.
02:54I put one on N.
02:56Now I will put it on 200W.
02:58And before putting it,
03:00I will put this sensor here.
03:02See this,
03:04this is the address.
03:06I have put the sensor.
03:08After putting the sensor,
03:10I will put it on the 200W series.
03:12See this,
03:14see this,
03:16see this,
03:18this letter is blinking.
03:20This is the error of F1.
03:22We got to know that
03:24this is the error of F1.
03:26I will cover this error of F1
03:28in a good way today.
03:30I will show you how I cover it.
03:32I removed it.
03:34After opening it from here,
03:36after opening it,
03:38I discharged it
03:40from both capacitors
03:42with bulb.
03:44This capacitor is discharged.
03:46Now there is no danger
03:48or difficulty in working.
03:50Then I will remove it.
03:52I removed both reactors from here.
03:54Now I will remove the sensor.
03:56Now our second work will start.
03:58Which is
04:00absolutely worth seeing.
04:02And you see it.
04:04You see it on the screen.
04:06If you see on the screen,
04:08this multimeter is lying with me.
04:10Now if I give you a little view
04:12then it is better
04:14that I take it from here
04:16so that you get to know about both things.
04:18Now I am looking at the microscope
04:20so that you will have a little problem there.
04:22Let's zoom in a little
04:24so that they can clearly see both things,
04:26meter and both things.
04:28So that they understand
04:30how to check this thing.
04:32First of all, see,
04:34these two are from F1.
04:36I will check this.
04:38I will tell you what is wrong.
04:40This is fine.
04:42Now I have checked this.
04:44This is also fine.
04:46But first of all,
04:48we will check it.
04:50Let's check IBM.
04:52There is no problem in that.
04:54First of all, I will put it on the high side
04:56and check it.
04:58This meter is not showing anything.
05:00Now we will put it
05:02from here.
05:04I will check it from here.
05:06First I will check its high side.
05:10I will put this on negative
05:12and I will put this on positive.
05:14I have put it on diver mode.
05:16I have put it all.
05:18Now from here, this side is fine.
05:20Now I will check its low side.
05:22There is no fault in the low side.
05:24Please zoom in and show it.
05:26See here,
05:28this is its ground.
05:30I am checking it from a single point meter
05:32so that I can see
05:34I will put the meter
05:36once on diver mode.
05:38See here.
05:44I am getting all the readings
05:46correct.
05:48And my low side is also fine.
05:50Now after this,
05:52I have checked both the low side and high side of IBM.
05:54After this, the problem came only
05:56on the IC.
05:58These are the ICs.
06:00Here you can see
06:02this is 302.
06:04This is 358 LM.
06:06After this, we will check its assembly.
06:10Now I am going to check this IC.
06:12See here, I have shown it on the screen
06:14which IC it is.
06:16I am going to check it.
06:18I have to put one probe here
06:20on this ground.
06:22After putting it, I will remember everything.
06:24I will show you everything once.
06:26See here.
06:28I have checked it.
06:30See here.
06:32Its reading is fine from this point.
06:34Now I am checking 2.
06:36After this,
06:38its reading is 3.
06:40Its reading is not correct from this side.
06:42Now I will check on this.
06:44See here.
06:46Its reading is also fine on this.
06:48After this,
06:50its reading is 308 LM.
06:52See here.
06:54Now we will check it.
06:56See here.
06:58Its assembly is here.
07:00Now we will check it.
07:02First of all, I have put it here.
07:04See here.
07:06Its reading is correct.
07:08Its results are correct.
07:12This shows that
07:14the SMD fellow has some problem from this side.
07:16This too.
07:20This too is fine.
07:22This IC is also checked by us.
07:26Now I will check its SMD.
07:28I will visit the A Part
07:30the
07:49company
08:03So, let's go to the next one.
08:05This one will tell you, point 26.
08:07This one is also correct.
08:09This one is also correct.
08:13This one is also correct.
08:19Let me show you this one.
08:21Let me show you the top one.
08:23After this one,
08:25let me show you this one.
08:27Not all of them.
08:29All of them are correct.
08:31This one is also correct.
08:33After this one,
08:35after this one,
08:37let me show you this one.
08:39All of them are correct.
08:41Let me show you this one.
08:43This one is incorrect.
08:45This one is also incorrect.
08:47Its number is R88.
08:49This one is incorrect.
08:51Let me find the other one.
08:53Let me find the other one.
08:55Remember this number.
08:57We mention it here.
08:59And this one is incorrect.
09:01These two SMDs are incorrect.
09:03This one and this one.
09:05These two SMDs are incorrect.
09:07Now I will clean it from the top.
09:09After cleaning,
09:11I will take it out and put it in front of you.
09:13Then we will check the kit.
09:15There is a solution on it.
09:17I will remove the silicon.
09:23See this.
09:25All of the silicon is removed.
09:27All of the silicon is removed.
09:29All of the silicon is removed.
09:31From the top.
09:37See this.
09:39I have started removing the SMD resistance.
09:41See this.
09:43You have to keep it like this.
09:45This is the way to remove it.
09:47This is the way to remove it.
09:49You have to remove it very carefully.
09:51See this.
09:53I have removed it.
09:55See this.
09:57I have removed it.
09:59Now I will remove this one.
10:01It has a reverse side.
10:03See this.
10:05I have removed it very easily.
10:07Now I will put the new one.
10:09I will put the new one.
10:11The way to put the new one is
10:13You have to try to reduce the temperature.
10:15You have to try to reduce the temperature.
10:17See this.
10:19It has a reverse side.
10:21See this.
10:23I have put it here.
10:25Now I will put it here.
10:27Now I will put it here.
10:29I have put it here.
10:35Now I will put it here.
10:45See this.
10:47Here it is.
10:49Now, we will turn on the voltage and see what happens.
10:54Note one thing, that the SMD that is installed, you will not be able to judge it.
11:00I removed it and put it in front of you, but there is no judgment that this is installed again in the kit or genuine.
11:05Similarly, the work should be done so that the customer is never judged that this work has been done again, this is genuine or any person.
11:14You make your work standard and there is no complaint from it.
11:19Because the joint looks good, if you use a good instrument, it will be a good job.
11:23Now we have installed this, I have installed the reactor, I am installing the sensor.
11:27Now I give it, after giving the voltage, these lights will tell us whether the kit is correct or not, if there is any fault in it.
11:35This was the error of F1, then I will remind you a little.
11:39You have to see it completely, you did not see it here, so I closed it.
11:42See, God willing, you will be able to cover the work.
11:46I have turned it on.
11:50Look, there is still an error of F1, now something else is wrong in it, let's see what is wrong in it.
11:55Let's check which error is in it, why is this error coming.
11:59See, now I will discharge it once, then I will do it again.
12:03There may be a mistake, I will do it now.
12:07The sensor is also loose, see, now it is discharging, let's do it again.
12:12The biggest sign of this being correct is that you have to focus on these lights.
12:17Here these lights will turn on and off at the same time.
12:20See, all three are on, this is off.
12:24Our kit is now clear, we have cleared F1, this kit is ok, we can give it to the customer.
12:30If you like my video, then like it if you want, share it as you wish.
12:37Also subscribe to our channel.
12:40And always watch the full video.
12:43Thank you, goodbye.
Comments