00:00Assalam-o-Alaikum.
00:02This is the 15th error.
00:04It comes in the convert and
00:06removes itself.
00:08There are a few reasons for this.
00:10There are faults.
00:12The main thing is that
00:14this red colored
00:16jack is here.
00:18It is red here.
00:20If here it is
00:22that if in this
00:24due to some reason
00:26it gets disconnected because
00:28there is a problem.
00:30There is an overload
00:32inside it.
00:34It is taped.
00:36I saw a video
00:38that there is a gas in it.
00:40There is no gas in it.
00:42There is nothing.
00:44There is only a leaf.
00:46We can turn it off when it is hot
00:48and turn it on when it is hot
00:50at the same temperature.
00:52If we flip the leaf inside
00:54and fit it upside down,
00:56it starts the opposite work.
00:58That is later.
01:00If there is a fault in it,
01:02the continuity should be 0.
01:04The continuity should be
01:060.
01:08There should be
01:10no resistance in it.
01:12If this problem comes again
01:14and again,
01:16you can check
01:18that due to some reason
01:20the compressor is overheating.
01:22If there is a blackage in the compressor
01:24then also the compressor will overheat.
01:26If there is a function valve,
01:28it is not working.
01:30If there is a capillary tube,
01:32it is not working.
01:34Due to these reasons,
01:36you will see
01:38error 15.
01:40You can check all these things
01:42in detail.
01:44If the heat sinker gets dirty,
01:46then also error 15
01:48starts coming.
01:50Check all these things.
01:52If due to some reason
01:54the compressor is overheating,
01:56then also error 15
01:58starts coming.
02:00These are the small things
02:02which I have tried to tell you.
02:04Watch our video completely.
02:08Subscribe to this channel.
02:10If you like the video,
02:12then like it.
Comments