Skip to playerSkip to main contentSkip to footer
  • 2 years ago
Quick walk around on Verne's Bronco Project.
Transcript
00:00 Alright, so here's my '69 Bronco.
00:06 I just pulled the body yesterday up on the lift, pulled it off the frame so I can paint
00:13 the chassis.
00:15 Just spraying some creeping fluid onto the body mount so they'll come apart.
00:21 I welded up that hole that was torqued in the back of the frame and I painted the axles
00:27 and springs a couple days ago.
00:31 I used some POR-15 top coat paint for that.
00:36 Seems like it went on pretty well and it's nice and hard even just a few days later.
00:41 I actually used a spray gun, which was new to me.
00:45 I'm going to go back in here and clean up some of these welds just because they're so
00:48 ugly I can't deal with them.
00:50 I was going to try and leave it alone because everything takes time, but hopefully that'll
00:55 only just take a few hours.
00:57 So there are the doors over there, I need to do something with them.
01:00 I was playing with the Gorilla Warflares from Wild Horses 4x4.
01:10 And then this is a Dynacorn fender and rear corner that I've installed.
01:15 I have to grind some welds down.
01:18 That cowl piece is also from Dynacorn and they fit really well.
01:22 I got some replacement floors from another company that are ok but they didn't fit nearly
01:28 as well as the Dynacorn parts.
01:30 And I have to fix a little bit on the tranny tunnel cover there, but otherwise the body's
01:35 getting real close to getting paint.
01:38 Which I'm going to try and do myself, which will be new for me.
01:42 So hopefully this thing will be coming together soon.
01:45 I've definitely got a lot of the parts here.
01:48 Just needs time and elbow grease.
01:51 There we go.

Recommended