00:07ترجمة نانسي قبل
00:13في السؤال الرسالة من illness
00:15إننا نحن الوصول المئلة
00:16المسادة سعيد من التفاني sangat
00:20وست نتربية جديدة
00:21قبل هذه المقرية
00:22لذلك قمت باستخدار
00:26وللعدي هذه المقرية
00:27قمة نقط الامتظار
00:28من تأستخدام
00:28استخدام الخريطة
00:28مصيدة
00:30قبل ان تحديد المنطقة
00:33سعيد المنطقة
00:37في قرية التطويل
00:40اشترام قد تحديد المنطقة
00:43لابدام تنسيص بأس الممر بصمد ورقبات مفرسلات
00:47أجلاء تقوم بالكامرات المستقيمة
00:49وي تآل الباشر الوصول الوصول الوصول الالتراني
00:53والي تجتب بقصة الكلمة
00:56وأن تسطح البحث
00:59طرح الوصول والحلطة
00:59نعم لذلك قربي،
00:59اقفر بقصة الوصول
01:03الهيضا 1.5 صدق
01:06والمهار آدم
01:08هي موضوع 4 فت وموضوع 2 فت
01:13ويمكن ترى أن ترى أن ترى بل ترديو وضع موضوع
01:18نعم سنفتر الأفضل
01:21ومفتر الأفضل
01:24ومفتر الأفضل من حيث
01:29سنفتر الأفضل من حيث
01:31from the edge so here we will use the reference plan again use rp and take a
01:47small offset a small distance from the side like one inch so take dimension di
02:00and just click on the reference plan and then adjust the sizes just lock it now again press di
02:12and adjust the size again for one inches and lock the dimensions again you can use the reference
02:25plan inside one more reference plan here inside plus di dimensions and adjust the value of the
02:38reference plan one inches here again and lock it di and take this dimension again just click on
02:50reference plan and one inches one inch here just lock it so now we have all sides a little distance
03:02from the edges and now we will create now we will add more reference plans to create the actual shape
03:13so press rp take here again one more here and one more here so again take the dimensions
03:44make it two inches and lock the dimensions again take the dimension here just make it two inches
03:58and lock it here and lock it here device it take the dimensions just click on the reference plan then
04:10take the dimensions and lock the dimensions one more take this dimension
04:27make sure it's correct okay it's fine and lock it now we have and we have a shape that we
04:39need to use just click on create and use extrusion
04:45and now we will use rectangle and lock click on these locks and lock the sketch again
05:08if you don't lock you can face an error anytime especially when you will drag it and something like that
05:20so don't forget to lock all the time
05:29we will make sure if there is missing
05:39i think here we missed so we will use align and make sure it's on lock now and yes now
05:51all have locked
05:54it's fine it's fine okay we will click on finish edit mode
06:02and check the shape so we will move these on the downside so we will use here extrusion
06:15in minus and like three feet okay press apply and this is the table we have created
06:37it's a parameter you can change the sizes anytime and it will work perfect without any error
06:47using family types using family types and change it such as here
06:54like height length is six feet and mid four feet apply okay and you can see
07:05the everything every leg is in its shape
07:16and that's all from the same place
07:22as we set as we adjust it and once again here we will change the size
07:30like it make it eight feet and five feet and see
07:40but can we change leg sizes no because we don't use a parameter for its leg size so we will
07:55create in the next session
07:58and make it different shapes from from the current model
08:07thank you for watching see you next video
08:10you
08:10you
08:10you
08:10you
08:10you
08:11you
Comments