• 3 months ago
The RQS Controller brings all your connected Grow Tent devices together in one simple interface. Easily adjust parameters and channels while using different modes to automate your light cycle, fan speed, and inline fan power. Simple to set up, easy to control, and designed to make managing your grow more convenient.

Check out the video to learn more about the RQS Controller.

Category

📚
Learning
Transcript
00:00If you got a grow tent, you would have seen it comes with a controller,
00:03from which you can adjust every parameter for your plant environment.
00:07But how does it work? First, you need to connect all devices to the controller.
00:11From left to right, power source, not mandatory, because if any of the fans are connected,
00:16they can be the power source. Inline fan, clip fan, either way is fine,
00:21the controller will know which one is which. Smart socket, temperature and humidity sensor,
00:25and LED light. In the first screen, we can see the temperature, the humidity percentage,
00:36and light wattage and percentage. This circle will indicate where you are and what you are modifying.
00:43The first button is to move between channels. Channel 1 is the inline fan. Channel 2 is the clip fan.
00:49Channel 4 is the LED lights. If you press this button for 5 seconds,
00:54you can lock the controller. This way, the buttons won't work to save you from any unwanted changes.
01:00Press for 5 seconds again to unlock. The second button is to move around each channel's functions,
01:06which can be cycle, off, on and auto. If you press this button for 3 seconds every time on the
01:12old
01:12channel, you can set auto mode timers and triggers for all devices at the same time. But if you'd prefer
01:19each device to have different times and limits, you can also do it in each channel separately.
01:24Buttons 3 and 4 are to increase or decrease parameters, and button 5 is for general settings.
01:31First, you should set the time of day, then match your LED's power in watts,
01:35and lastly the temperature unit .
01:40Auto mode consists of timers and triggers. The timers for LED lights can be useful when your
01:46plants need a specific light pattern, like 12-12 or 18-6. When it says timer 2 on, this is
01:52where
01:53we set the time when we want it to turn on. And when it says timer 2 off, we set
01:58the time when we
01:59want it to turn off. Temperature and humidity triggers work to activate or deactivate the devices
02:07automatically according to those environmental elements. For example, if we don't want our tent to
02:12reach over 26 degrees Celsius, we set it here in temperature. And if the tent gets higher than 26
02:18degrees, the lights or the fans will adjust the power to bring down the temperature. And when the
02:23temperature normalizes, the lights or the fans will adjust again. With humidity, it's pretty much the
02:30same, except it's a thing only fans can do. If you want to activate a timer but not the triggers,
02:36you can deactivate them by decreasing the parameter all the way until you see off next to it.
02:45Although auto mode activates the devices according to the time and limits, the potency they will
02:50work on will have to be the one you set, either on on mode, which is just a set of
02:55quantity normally,
02:56or in the case of the fans, on cycle mode. Cycle mode is designed to imitate natural wind,
03:03so when you set a number between 1 and 10, that is the maximum power the fans will have.
03:09They will then go up and down instead of having a constant airflow.
03:17To control the tent from your phone, you will first need to download the RQS GrowHub app on your
03:22App Store. You will see a Wi-Fi icon flashing at the top of the controller screen. That means it's
03:28trying to find a network to connect to. After you sign in on the app, click the plus to add
03:33the device.
03:35Recognize the RQS controller and click on it. You will need to choose your preferred Wi-Fi network to
03:40connect it to. For example, your home's Wi-Fi, the same that's on your phone. And then, when the pairing
03:46is complete, you will have control of your grow tent from your phone. The settings are pretty much the
03:52same as the ones on the controller. The different channels that control each device. We hope this
03:59guide helped you understand your grow tent a little bit better and that your plants thrive
04:03in a new environment you will create for them. Grow higher!

Recommended