00:02Hi, in this video I will give a tutorial on how to set up a router.
00:06We will use the MW302R as a wireless router, namely WISB.
00:16OK, let's get straight to the point. First, connect the power cable to the adapter socket like this.
00:21OK, if it's connected like this, let's just reset it first so it can work again.
00:28to the factory settings initially you forgot this small you poke and hold for a few seconds until
00:35reset OK, it's off and again this is a sign that the reset has been successful. If it has been successfully reset, we will set it up.
00:44If you don't use a laptop, you can use an Android cellphone. Okay, let's get straight to it.
00:50You enter the connection to the WiFi, this is called Merdosa. Okay, we will connect it automatically, so it will be like this.
01:00then you can enter the gateway IP like this in one or you can also do it more simply
01:09Just type mw login like this mw login.net if you don't want to enter the IP address for the password
01:25This login password will not be the WiFi, this is for logging into the router. Okay, let's get started.
01:38After that, just go to this section and then select WSP. Well, for this WSP and this mode, we don't...
01:47need
01:49no need to use a wireless cable using wireless WSP and extender mode if
01:57We have to connect this access point and router via a LAN cable so that it can connect to the internet.
02:03We connect the other cable to an internet source or modem so it can be connected if it is in router mode or
02:09access point, whereas if you don't want to use a cable to connect to the modem
02:14Your internet source can use standard range mode or WSP. The best step is to use WSP.
02:20just because this will not be known by the admin or the owner of the Wifi. Okay, since I have done this
02:25explain yesterday's video now this one is WSP mode then okay and report wait until the process
02:33the restart is complete
02:39OK, if it's finished, we'll connect again, mergesis, we'll connect, we'll log in.
02:46We can still take login.net, we can check the IP, whether it has changed or remains at 1.1
03:10I will set this first, I will change it to plus 7 Jakarta, next time I will
03:25select the Wifi that we want to connect to or we shoot we will shoot the MTS Wifi
03:33okay, there isn't any, we'll refresh first if we don't find it
03:41okay, I didn't find it, refresh again
03:49So, this is our MTS, we connect, enter the Wifi password, the Wifi password that we are going to shoot must be the same as the Wifi password as the Wifi
03:58center
03:59OK, this is the WiFi password, then OK, just choose the dynamic one if you
04:06want to sell Wifi who want to sell Wifi or Wifi voucher provider or Wifi internet for sale again
04:13you can use this PPO mode
04:14because later it can be set using Mikrotik to limit the bandwidth
04:21Well, my flour doesn't sell Wifi and doesn't sell Wifi vouchers.
04:24buy a dynamic IP then next this is the Wifi name that will appear later we change this to the Wifi that we will create
04:34enter according to your wishes
04:36I gave the computer name X and its password
04:38personal P2 name
04:43the password is computer X too but small
04:48well like this then next
04:52okay, just this one is quite easy and next
04:57okay connected
05:00we try this test will disappear so computer X later
05:06Well, this one
05:07enter the WiFi
05:10connect password
05:13So we will connect to the MTS that we shot earlier.
05:16Okay
05:17already connected
05:18but no internet access
05:22okay, it's connected
05:24we connect internet access yes
05:29can automatically connect this
05:30we test
05:33Internet
05:36router
05:37we try to look for the router
05:39Well, I managed to surf the internet
05:41by connecting to MTS Wifi
05:43earlier
05:44we separate it in the room using this
05:48the signal is also very fast
05:53go
05:53quick set bro
05:56then we check the IP
05:58internet sources
06:000.1
06:02the gateway has changed, right?
06:03the previous one was 1.1
06:04because of router mode it automatically changes to 0.1
06:07we are remote
06:09try this test
06:111.0.1
06:13This
06:15Okay
06:16successfully logged in
06:17Now we try to remote the internet source or modem
06:21modem from
06:22the internet source is JTE
06:25from Telekom Indihome
06:26this is the IP
06:28the gateway
06:29usually
06:31if not
06:32you can check it yourself
06:33connect first
06:34to the Wifi source
06:35or internet sources
06:38Okay
06:38already connected
06:39we check the source
06:40What is the internet IP?
06:42using Wifi MEN
06:43you can go to discovery
06:44if you have researched Wifi MEN
06:48Okay
06:48this is the application, yeah
06:49Wifi MEN
06:51go to discovery
06:53Well, this is the gateway
06:541.1
06:56it's different, right?
06:57which was 0.1
06:58this is it
06:59this later
07:00read on the modem or internet source
07:03is this
07:041,119
07:06which was
07:07If we
07:08connect to computer X
07:10alias Wifi which
07:11which is here
07:12IP is 0.1
07:14whereas
07:15if we connect to
07:16internet sources
07:17this internet
07:18MTS
07:19he will be changed
07:201,119
07:21return
07:22we reconnect
07:23to computer X
07:28If we
07:29will
07:29remote
07:30JTE's
07:36that is
07:361.1
07:38like this yeah
07:38the WiFi modem
07:41internet source modem
07:43his IP
07:44Well, it worked
07:46while later
07:47to access this
07:480.1
07:52That
07:53Okay
07:53we succeeded too
07:55or can login
07:57direct
07:57let us
07:57typing IP
07:58Ouch
07:58MW
07:59MW
08:00login.net
08:02like this
08:04means will also
08:05back here again
08:06like that
08:08Okay
08:09as easy as that
08:10video tutorial
08:11how to set
08:14WSP
08:15on the router
08:16merjusis
08:16I hope this video is useful
08:18and thank you
08:20guys
08:20menele
08:20Then
08:20Then
08:20Thank You.
Komentar