00:02Okay, in this video I will show you a tutorial on how to set up a Mercusis router.
00:09type mw302r Okay, let's just go straight to the method, I will set the extender mode aka ring extender
00:26In this way, to make a weak signal strong, first connect the source directly.
00:31The adapter is plugged into the power outlet and then plugged into the port or plugged into this adapter. Okay, like this
00:40then it's on, if it's on, we'll just reset it so we can set it to its initial position.
00:47you poke a small part and hold it for a few seconds until it resets Okay if it dies then it turns on again
01:00like this, it is a sign that the router has been successfully reset. If it has been successfully reset, we can go straight to it.
01:09To set it up, here's how to set it up. You can just use your cellphone to make it simpler.
01:15OK, this is the cellphone, then you connect to this wifi, namely the wifi is Mercusis, you connect to this
01:31OK, it's connected. If it's connected like this, just open Chrome and type it in.
01:42The IP address is like this: 1.1 OK, then press enter, then you will go to the section
02:01This
02:02In the initial settings, you create the admin login password. I gave it admin 123.
02:19this is also below also admin 123
02:27OK, if you have created the password, then let's get started, after that, just go ahead and fill this in, you don't need to fill it in.
02:35later we can fill it in, we go straight to this section, the Nark2 connection, then select the ring extender
02:43So, if we use ring extender mode and WSP, we connect to the internet source or modem without using a cable.
02:50aka using wireless, whereas in access point and router mode we have to connect to a modem or internet source
03:01using a cable since we have discussed the second one we will try this ring extender okay then
03:10you guys are okay and restart
03:12and wait until the process is complete
03:19this is the first setting
03:22this is number 7
03:25then next
03:26skip this
03:28Now
03:30You enable this wireless setting
03:33name your wifi
03:37the name of the computer is the password
03:42all small computers
03:46okay like this then next
03:49and next
03:56okay this has to be connected with a cable
03:59but you can just skip it
04:03well like this
04:04it will be like this later
04:07in the internet data it is like this
04:08we can set it
04:10use
04:12advanced mode
04:15a bit complicated yeah
04:16if this light is different from the total link
04:19or sign stay next next
04:20there will be its own settings later
04:22will be directed to the settings
04:24If we use this light we have to set it manually
04:27then go to the network section
04:30and LAN
04:33Here you change the IP address from this
04:35this 1.1 is the gateway IP it should be
04:39we have to change it
04:40according to the IP of the internet source or modem
04:43okay we modem that I will shoot
04:46that I will shoot or the internet
04:49that I'm going to shoot in this
04:50which we will broaden the signal
04:52MTS
04:54we check the IP first
04:58IP address
05:02OK if it's connected
05:04we check the IP address of this gateway
05:07by using
05:08this is vman application
05:10You must have seen it on the Playstore
05:12then go to discovery
05:13and refresh
05:15we check the internet source IP
05:17So this gateway is the internet source
05:19from Telekom Indihome
05:22that is
05:221.1.1
05:24this is an internet source
05:25modem from Telekom Indihome
05:27we match it with the one
05:29This IP
05:30but it can't be the same
05:31earlier it was 1.1
05:34we have to change the gateway to another one
05:35his IP
05:36Okay
05:43we connect first
05:45This wifi
05:46Merchusis Wifi
05:47to set it up
05:49Again
05:51earlier there was one Merchusis
05:56okay we're back to advanced
05:59wireless
06:00wireless
06:01network
06:02other
06:03Well here you can't be the same as
06:05gateway or internet source
06:07his IP
06:07we change it to whatever
06:09I will change this to 30
06:11then save
06:13and okay
06:13and wait until the restart process is complete
06:18if it has finished restarting
06:20we check
06:21we connect Merchusis
06:22but there is no internet yet
06:23we can just type in the IP that changed earlier
06:27which was originally 1.1
06:29we turned 30 like this
06:32then next
06:35Okay
06:36we managed to get in here
06:37enter the password
06:45Okay
06:46there is no internet yet
06:48we can go to the section
06:53advanced operation mode
06:56select ring extender
06:58save
06:59and reboot
07:05This is a bit strange, isn't it?
07:08this cheap rotor
07:09different from a tent
07:11usually a tent or
07:13totaling is possible immediately
07:14If we set it, we have to go back to manual settings
07:17a bit of a hassle for people who
07:19just learning networking
07:22Okay
07:23we entered earlier
07:241.30
07:26Okay
07:27can't connect
07:28because it is not connected yet
07:30let's connect first
07:34Okay
07:35we connect
07:35This is the IP
07:38Okay
07:39we can't connect to 1.30 yeah
07:41this is the sign
07:42The IP has changed
07:44because it has been changed to extender mode
07:49earlier
07:49to see
07:51This is the IP
07:51because it has changed
07:53we open again
07:54vman
07:55then discovery
07:56and refresh
07:58and see
07:59The IP becomes 1.254
08:02Okay
08:02let's just get straight to it
08:03go to 1.254
08:07like this
08:08then enter
08:16admin
08:17123
08:19enter
08:19then it will be brought later
08:22to make the menu display look like this
08:24we are waiting for the wifi scanning process
08:29Okay
08:30search
08:33we will shoot wifi
08:34middle school
08:35in
08:36this example
08:45Okay
08:45not found yet
08:46the wifi we will shoot
08:50Well, this is the WiFi
08:51middle school
08:54enter the wifi password that we will shoot
08:57You have to know the WiFi password first
09:12Okay
09:13then okay
09:14Well, here you can copy the host to mts
09:18later yeah same
09:19or you can create a new wifi, it's up to you
09:23for example computer X
09:24Okay
09:24we will spread the weak wifi signal earlier
09:27Which
09:29this one bar
09:31let's just make it the same
09:33copy host like this
09:34then enter the same password
09:37then next
09:39and wait until the process is complete
09:42okay this is the router host or host that we are shooting
09:45like this the password will be later
09:47so this
09:48the password becomes
09:51even if it can be changed
09:53Up to you
09:55we will save it later
09:57and wait for the process
09:58restart is complete
10:00then the signal will be full
10:04okay, this dose will lose its signal
10:07and will change to this mts
10:08we wait until the signal is full again
10:11we refresh
10:16So it's full like this
10:18because we copy
10:21we spread or strengthen the weak signal
10:24on the extender earlier
10:28Well, on this
10:32if you want to change or replace the name
10:36you can too
10:38if you don't want to
10:40the wifi name is the same
10:43you just change it
10:45in this section
10:47wireless
10:50Well, this is MTS
10:51Earlier we copied to this host, right?
10:53you can change it like this
10:55for example computer x
11:00the password
11:01we replace computer x
11:05like this
11:08like this
11:09Then
11:10save
11:11Okay
11:12then the MTS signal will be there
11:15not full anymore
11:15will be 2
11:20So, MTS is back to normal
11:24that is, the signal is 1
11:26and we create a new wifi with the computer name x
11:28like that
11:30the difference if you change
11:31the name of the wifi
11:32So
11:32if you change the wifi name
11:35then the wifi is the source
11:37still there
11:38we make new wifi
11:39whereas if you guys
11:41equalize
11:41the name of the wifi with the one we shot
11:44so this
11:44will be lost and
11:46make it into 1
11:47and the signal becomes full
11:49So
11:52So
11:52someone doesn't know that we
11:54masking wifi from this mts
11:56because the signal is full
11:59in our room
12:01or in our room
12:03okay like that
12:05if you want to change it again
12:07just press this copy to host ssid
12:10then we save
12:15This password must be the same as before
12:17if it's not the same we'll try
12:23then he can't connect
12:24must be forgotten first
12:27if the password is not the same
12:28You enter again the password that we created earlier
12:32computer 8
12:34like this
12:36then he will connect later
12:38like that
12:41So
12:42if copy to host ssid
12:43so
12:45wifi shot
12:47the signal will be full
12:48whereas if we change the name of the wifi
12:51then the ssid that
12:53or the wifi we shoot
12:54the signal is there but it remains one
12:56we create a new wifi signal with a full signal
12:59like that
13:00Now we test the internet
13:03also can
13:04fluent
13:06then we check the gateway
13:08internet sources
13:13the gateway IP becomes
13:17we check first
13:21okay, done
13:24So the gateway IP is 1.1
13:27while the IP has changed
13:28which was 2.5.4 becomes
13:301.9
13:32we test for
13:33remote it
13:40Okay
13:42successfully accessed
13:44modem internet source
13:45yte from indihome
13:46to access this
13:48which was 9
13:53also can
13:55or
13:56so you don't get confused
13:57can't activate this
13:58straight to
13:59typing
14:00address
14:01the website is here
14:03this one
14:07mwlogin.net
14:09let's try
14:11we need to activate the IP
14:14mwlogin.net
14:18also can
14:19so it's simpler
14:21like that
14:23Okay
14:24for
14:25blogging
14:25currently
14:25Thank You.
