00:00Hi, in this video I will give a tutorial on how to set up a TP-Link type WR840N.
00:10WISB mode Okay, this is the wafi password and this is for remote login from akuban, this is admin-admi
00:18The original way is first we connect the adapter to the electricity, then we reset it first.
00:24Previously, the reset button was small, we held it down for a few seconds, press and hold it until it resets later.
00:35the indicator will be full and then disappear again, the data has been reset like this, it was successful
00:43reset if it has been successfully reset, we can immediately set it via cellphone or computer because
00:51This makes just using a cellphone simpler and faster without setting the IP first
01:00OK, just go ahead and the WiFi will appear with the name TP-Link.
01:09here we connect tp-link
01:14The password is the same as the one here, the password is 4303 4303 5090
01:35then connect if it is successful, connect like this, we can immediately do the settings, namely
01:44go to Google Chrome and enter the IP 19001 like this enter
01:53we will log in first
01:59OK, the login is admin admin admin, the password is also admin, OK?
02:06with admin admin then login
02:10If you have logged in like this, you can go to quick setup.
02:18then select next
02:22So here we will use WSB mode, the difference is that WSB is different from a wireless router, if we use a wireless router, we...
02:30must use cable media while WSB is used to connect it to an internet source or modem
02:35We can use WSB without using cables or using wireless WiFi, it has the same function
02:44The function of a router and an access point is the same, namely connecting to an internet source using a cable medium.
02:49The difference is that this one doesn't need to change the IP, whereas this one has to change the IP to the same as the modem.
02:55Meanwhile, for WSB, we don't need to change the IP, it will remain 0.1, no need to change the IP
03:04it's the same
03:05we have to be the same as the gateway or internet source from the jtfm09 modem
03:11okay we will mode this WSB
03:14what will we be like next
03:17dynamic option only for static you can see if you see know the IP address for this ppwoe
03:25This is usually used by people who sell WiFi such as Mikrotik to limit the bandwidth of the client.
03:32OK, select dynamic then next
03:38okay let's look for the WiFi we want to shoot we will shoot this WiFi MTS
03:45connect and enter the password, it must be the same password, the password we shot the WiFi password is
03:56okay this is computer X
04:01OK, this is the name of the WiFi that we will create as WiFi for computer X. I'll give it the WiFi name
04:09computer X WiFi name
04:13then you also fill in the password
04:16I will fill in the password with the name and password of computer X like this
04:22okay then next
04:24So, this is the name of the WiFi: WiFi computer X, the password is computer X.
04:32then next finish
04:35we wait until the restart process is complete
04:38this is red
04:39There is a quote that indicates that when there is no internet, later when there is internet he will have it on the internet.
04:45This is still restarting, we'll just wait
04:50the process is still 23
04:52okay he's dead
04:54and turn it back on again to its settings
04:56the settings
05:05OK, I've successfully installed the internet, yes, the color is green.
05:09but this is still reset we can try it straight away
05:12okay we can go straight to the WiFi section
05:15we connect to computer X's WiFi name
05:18we connect to computer X's WiFi name
05:19that we just made earlier
05:20okay computer WiFi X
05:26computer X's password
05:28like this
05:30then connect
05:32okay, it's connected
05:34and can directly access the internet
05:35let's test it
05:40let's test it
05:42router test
05:47okay, now you can use the internet
05:49okay, now you can use the internet
05:52slaps can also
05:57fluent
05:59then for this IP
06:00we are remote
06:01the modem
06:02or access the internet source
06:04namely JTE
06:06also accessible
06:07while this IP is
06:08stay the same yeah
06:09because of router mode
06:12no need to change IP
06:15remains the same and can be accessed too
06:17like that
06:18the difference from
06:21USB and wireless router
06:24if wireless router
06:24we have to connect it
06:25using a LAN cable
06:27while WISP
06:28we just need
06:30WiFi or wireless signal
06:31from this device only
06:33like that
06:34Okay
06:36maybe first give this video a try
06:39and also
06:40previously
06:41for this WISP
06:42we can also use it
06:43to shoot the neighbor's WiFi
06:44so as not to be caught
06:45there are many devices
06:47which we connect to
06:48the neighbor's WiFi
06:50because this is the IP
06:51has changed
06:51for one
06:52so he won't be detected
06:54in
06:56in
06:57in the application
06:59or in
07:00DHCP
07:01in DHCP
07:03This JTE
07:03he will not be detected
07:05or he uses
07:06WiFi
07:07Also
07:08connected devices
07:10with this
07:10or with
07:12Our neighbor's WiFi
07:13cannot be detected
07:14because of this IP
07:15it's different
07:16he couldn't detect
07:17so it's very safe
07:19to shoot
07:20Neighbor's WiFi
07:21without being caught
07:23namely with this WISP mode
07:24like that
07:26that's all for now
07:27this video
07:28do not forget
07:29you subscribe
07:30and thank you
07:31Thank You
07:31enjoy!
Komentar