ramb231z Handlebar U bolt Zinc Mount
- 15 years ago
The Marine Grade Aluminum Rail Base has a 1.0'' diameter Rubber Ball designed to sit at right angles to the mounting rail. The Zinc Coated metal U-Bolt and nuts included will fit a circular rail with diameter from 3/4'' to 1.0''.
To mount the rail base, place the top of the base on the rail and then slide the u-bolt around the rail, into the holes in the base. Now tighten the screws onto the u-bolt until the base is clamped firmly. If you desire, you can slot the black plastic covers over the exposed ends of the u-bolt.
http://www.gpscity.com/ram-mount-zinc-u-bolt-motorcycle-mount-base-ram-b-231zu.html
http://www.gpscity.ca/ram-mount-zinc-u-bolt-motorcycle-mount-base-ram-b-231zu.html
Connect With Us:
Website/Online Store
http://www.gpscity.com/
http://www.gpscity.ca/
Call Us
1-866-GPS-CITY (477-2489)
Facebook
http://www.facebook.com/pages/GPS-Cit...
Twitter
http://twitter.com/GPSCity
To mount the rail base, place the top of the base on the rail and then slide the u-bolt around the rail, into the holes in the base. Now tighten the screws onto the u-bolt until the base is clamped firmly. If you desire, you can slot the black plastic covers over the exposed ends of the u-bolt.
http://www.gpscity.com/ram-mount-zinc-u-bolt-motorcycle-mount-base-ram-b-231zu.html
http://www.gpscity.ca/ram-mount-zinc-u-bolt-motorcycle-mount-base-ram-b-231zu.html
Connect With Us:
Website/Online Store
http://www.gpscity.com/
http://www.gpscity.ca/
Call Us
1-866-GPS-CITY (477-2489)
http://www.facebook.com/pages/GPS-Cit...
http://twitter.com/GPSCity