00:00A great way to improve the performance and appearance of your Toyota 4Runner
00:04is by installing the wheel spacers. However, it is important to choose the right type of
00:10wheel spacers and ensure that they are installed correctly to avoid any negative effects.
00:17Let's take a look at the correct installation steps. Use a cross-range producing lug nut on
00:23the side of the wheel in a diagonal sequence but do not remove them completely using jacks
00:29to support each end of the car. It is a better safety measure. Use a cross-range to remove the
00:36wheel side
00:37like that. Remove the wheel of the hub and set it to the side. Look at the wheel hub assembly
00:42for rust.
00:44You can use a brake cleaner to remove them. Remove any rust and dirt from the wheel hub with a
00:50rack.
00:50Widen the entire surface to ensure it is smooth because all of that surface may cause the wheel
00:56spacer to not fit perfectly with the hub. Install the bonus-forged Apti-Cooling Toyota 4Runner
01:03wheel spacers. You can install the machine like that. Tighten them with a torque wrench. A key
01:08advantage of bonus Toyota 4Runner wheel spacers is the Apti-Cooling feature. The bonus Toyota 4Runner
01:15wheel spacers are designed with heat dissipation boots to make brake cooling better. Distribute the
01:21impedance shift. These screws allow the thermal-cold air to flow continuously inside the wheel spacers
01:27wheel rotates. The air takes away the heat so it achieves the purpose of actually dissipating heat
01:35for the braking system. There are small notches that are distributed on the corner of the wheel spacers.
01:41These notches access air collectors which tremendously enlarge the airflow, enhancing the heat dissipation
01:48effect effect, and improve safety. All bonus Toyota 4Runner wheel spacers are all false.
01:54In addition, high-precision Toyota 4Runner wheel spacers provide high-surface integrity,
02:00effectively granted safety, stability, and reliability, and ensure smooth installing experience.
02:08Install the rim and then install the stock nut. Use a torque wrench to tighten them on the wheel.
02:13Make sure they are secure. Remove the jack stands.
02:17Slowly lower the car until the tires fully touch the ground, and remove the jack. Use a torque wrench
02:24to tighten the wheel lug net on the specific clock. Always tighten them in a diagonal sequence.
02:30This will ensure that the lug net works. The same operation is done for remaining wheels.
02:35Bonus recommend checking the use of the Toyota 4Runner wheel spacers every 6 months,
02:40and checking the vehicle's operation to ensure safe driving. We can see the wheel spacers push the
02:47wheel out slightly. Give me a more flush look with the fenders.
02:53No AI was used in the creation of this video. All editing was done manually. See you in the next
03:01video.
Comments