00:00During first flights or when weight readings deviate significantly, here are three steps to complete the calibration properly.
00:07Step 1, K-Calibrate. In the app spraying settings, click Weight Calibrate, K-Calibrate.
00:13Verify that all four weight sensor values match the remote controller readings, if they differ.
00:18Rewrite the K values.
00:20Step 2, click Zero Calibrate.
00:22Wait for the completion prompt in the app. Confirm and return to the app home screen.
00:26If the weight reading shows zero, calibration is successful.
00:30Step 3, weigh 40 kilograms or more of material and record the weight loaded into the tank.
00:35Click Weight Calibrate.
00:37Enter the known weight and start calibrating.
00:39Please do not touch the tank.
00:41During calibration, ensure tight contact between tank and sensors with no gaps.
00:45After calibration completes, verify the app the reading matches your input weight.
00:50If so, calibration is successful.
00:51To verify the results, load 25 kilograms of material into the tank.
00:55Confirm the reading increases from 45 kilograms to 70 kilograms.
01:00If accurate, calibration is complete.
Comments