00:00Ground station replanning and blind flight are the final subjects in the drone license exam.
00:05Students can use the EFT ground station for daily training or the exam.
00:10First confirm that the drone is connected to the ground station.
00:13Then draw the flight route according to the examiner's instructions.
00:16Set parameters such as flight altitude and click upload.
00:21Then click one-click takeoff.
00:24After the drone takes off and hovers, click start.
00:37When the examiner issues a re-planning instruction,
00:41click pause and plan the route according to the examiner's instructions,
00:45such as adding points between waypoints.
00:52Note that after setting, you need to re-upload.
00:54Then return to the home page, click add point and fly to it to set parameters such as altitude and
01:01speed.
01:01When the drone flies along the planned route, the re-planning test is complete.
01:06Next is the blind flight test.
01:08The examiner will interrupt the flight at any point along the route.
01:12The student must remember the return point and the drone's current position and manually return the drone.
01:18The examiner can click the small eye icon in the top status bar to hide the flight path.
01:24The student can then refer to the data shown on the compass and use the remote controller to return the
01:31drone.
01:31If the direction is correct, the blind flight test is passed and all assessment items for the drone license are
01:38now complete.
01:39The state is peruse.
01:40Part 3
01:40e
01:402
01:41ev
Comments