00:00My friends today will understand what is the purpose of colycer blanket in three-phase
00:05separation and how to design a colycer colycer basically placed after the inlet distributor
00:13just it can be in the vapor space or it can be in the liquid space also or the to
00:19the whole
00:19diameter of the two-phase separator to remove the very fine particles from the vapor or very
00:25fine droplets from the vapor and two closed density liquids from the liquid phase so when
00:34colycer blanket is required as I said the fluid contains very small droplets typically less than
00:39100 microns or when the two liquids having a very close density how it works it works basically the
00:48droplets follow the torridor's path like this through a colycing or colycing device and droplets
00:58collide with each other with the device and forming a large droplets and which will be fall down
01:03by the effect of gravity so this way it works and two key design parameter for the colycer is
01:11we have to maintain the maximum velocity to three feet per minute and there is a dp guideline also
01:17differential pressure can be two psi or it can be lesser than that so this way this colycer is used
01:25this is also one type of colycer in the vapor phase this picture which will be segregate the droplets
01:32very fine droplets from the vapor and it settle down to the fall into the liquid so thank you for
01:39watching and stay tuned with us to know such two minutes process engineering can thank you
01:47so
Comments