00:09Access to the device's web page and log in with the corresponding credentials.
00:23In the Data Sampling tab, verify that sampling activation is enabled.
00:29Activate if needed.
00:31Once the data sampling is enabled, let us navigate to an individual device, for example, PM5560.
00:41A list of all the available parameters is shown.
00:45By default, some could be configured already. Let's use a filter to see the currents.
00:53Some currents are already been stored by a default period of 10 minutes.
01:01To set another parameter to be logged, simply by clicking on the Data Sampling column.
01:09The sampling period can be set as required.
01:17Click Save.
01:29Let's do a batch configuration. First, we have to set the filter.
01:35Here, we are retrieving all the parameters that contain the word current and that are enabled already.
01:42Using the batch configurator, let's choose a different sampling period.
01:47Note how all the parameters period was modified to 2 minutes.
01:53If we clear the filter, we can verify that all the other parameters were not modified.
02:01Click Save and confirm the changes.
02:10As some previously set parameters were changed, a pop-up window appears and adjusts this new period.
02:21All set.
02:22The device is now recording data as per the recent changes.
02:26And all set up in the data.
02:30This tablet...
02:31extension data...
02:32Now choose update period отлично data.
02:34Number one?
02:34Let's set.
Comments