00:00Hello everyone.
00:02This is our PC.
00:06So, I'm going to open this door.
00:09I'll open it.
00:10Let's open it.
00:12Let's open it.
00:14How much?
00:15This is the way.
00:16This is the way.
00:21How much?
00:232.
00:253.
00:304.
00:325.
00:366.
00:407.
00:417.
00:428.
00:438 PCB.
00:44We have been repairinging.
00:47We are repairinging.
00:49We are repairinging PCB.
00:50We are repairinging PCB.
00:50We are repairinging PCB.
00:51We are going to show you.
00:52We are going to start with a number.
01:02We have to start with a new one.
01:04We can get a new one.
01:04It will be a new one.
01:07Let's try to adjust the new one.
01:08I will say that the new one.
01:094 is the new one.
01:13He found this very new one.
01:15We are repairinging.
01:16To do that, we will introduce ourselves.
01:20So, we can go to the numerous,
01:21more than the new one.
01:22But we don't have to fix that.
01:22So, we are repairinging.
01:22How much?
01:23would be that the
01:24we
01:24did you know you have to check with the
01:42and we will show you an example of communication
01:43communication
01:44and then we will check
01:46and not
01:49communication
01:50communication करेंगे तो यह चेकिंग इसकी हम कर सकते हैं कि इसमें क्या
01:54मसला है करें जी communication करते ते हैं आप communication करें तो मैं जरा
02:00उनको यह introduction थोड़ी सी इसकी करा दूँ भई यह number है मेरा
02:03आपके सामने है तो मैंने एक free of cost course बनाया इस PCB के
02:08हवाले से ताकि आपको यह PCB की रिपेरिंग सिखाई जाए पीसी बी का
02:13काम सिखाई जाए जाए जो free of cost है main चीज़ है कि free of cost बनाई हमने
02:18उसका फाइदा यह है कि हर मेरा भाई ले सकता है काम कर सकता है तो यह ना हो कि
02:24कोई
02:25पैसों की वज़ा से रहा जाए पैसे नहीं है हमने नहीं ले रहा तो यह लें आप काम सीखें काम
02:30करें तो आप इसको हमने
02:34communication का लिए लगाएं जिसको यह आपके सामने हम रेपेरिंग करेंगे इसमें तो इसमें जो भी error है
02:45यह ओके हो गई है सारी मकमल तो अब इसको हम लेते हैं जी आउन कर तो आउन करने से
02:55यह देखें दिखाएं जरा मुझे यह ठीक है रिमोट इसका तो यह ओन करते हैं भी हम यह प्लागिन मैंने
03:03कर दिया और यह तीनों इसकी लाइटें जो देखें आपने पर यह आफ हो ग�
03:11और यह कंप्रेसर हमारा अन हो गया है जी तो इसमें देखें कंप्रेसर के आपियमोट च्छे के च्छे यह देखें
03:17रोशन थे और फॉरण ही यह एफ वन के एरर में चलीगी यह देखने चेक कर लें आप तो इससे
03:23करते हैं अब आफ हम आफ करके से निकालते हैं तो डिस्�
03:40दूंगा यह नंबर है तो आप जो है वो इसको लेके इसको देखें इसकी वीडियो मुकमल देखें आप 100%
03:51काम जो है कर सकते हैं बाकी यह है कि अगर ना भी करें तो आपको होनों सारी मुकमल होगी
03:57कि इसमें कौन सी एरर किस वज़ा से आता और किस तरा इसको हमने रपेर क
04:01करना है इसमें कौन सा कमपोनेट क्या काम करता है मीटर दें
04:11जितने पर लगाया था पॉंटी पर तो यहां पर चेक करते हैं इसको तो समनी लस्टी चलाएं जरा क्योंकि नदर
04:19नहीं आता नहीं आता नहीं से मुझे
04:20आता है सो्डा समस्वार में इसको क्या रख देता हूं मैं इसको तो इसके करते हैं हम
04:47is
04:47is
05:01yeah
05:02yeah
05:02yeah
05:02yeah
05:02yeah
05:02yeah
05:02he has a look here
05:07he is
05:08he is
05:08where is he
05:12he is
05:13he is
05:1520
05:1520
05:16this
05:18so
05:19this
05:19this
05:20is
05:20this
05:23this
05:24here
05:2620
05:2620
05:2720
05:2720
05:2820
05:2820
05:2820
05:2820
05:28You can tell me that here is how many of you can tell me about it
05:31This is wrong, this is how you can see it
05:34So here is my camera, I'm going to zoom in a few times
05:39So zoom in and I'll show you
05:41My goal is to give you a good way to give you a good way
05:47So I'll show you a good way to give you a good way
05:48So that you can see it on your own repair
05:50This is how you can see it
05:53This is how you can see it
05:54R, how many?
05:56R, 40
05:57R, 40
05:57R, 40
06:00R, 40
06:01R, 40
06:01R, 40
06:02Yeah, it's bad
06:03There areここ, here
06:07So there, let's see this
06:09Take off
06:09Me 40
06:12.
06:13I don't know what your goal is here
06:16S' Neben and I will show you
06:19But the more useful
06:20This is the experienceEMERA
06:21Here To
06:22So here, if there is a little bit of a problem, we can see it.
06:27We can see it.
06:29Then we can see it.
06:31Here we can see it.
06:34This is our mistake.
06:36So this is the reason why we have been here.
06:39This is DC link.
06:41This is two key key.
06:43Two key key is to show us.
06:45So that this is the problem.
06:48Now this is the problem.
06:49This is the error.
06:50This error is basic F1 to show us, but this is DC link to the error.
06:56This is the IPM, which is our DC link to the error.
07:15and solder iron
07:17and solder iron
07:20so we can do this
07:28we can just do this
07:49x4
07:51kxc link
07:52kxc link
07:55change
07:55Change.
07:56Diagram to go ahead and write it down.
07:58Let's go ahead and write it down.
08:10Add it to the link.
08:26next video
08:28We'll make this course,
08:33we'll find that free
08:38as well.
08:39We give you a special thanks to the pleats we want to take you like,
08:44you'll know what happens to us like.
08:48Is there no problem?
08:51Let's go here.
08:52Is this fine?
08:54It's fine.
08:56Let's go in.
08:57Let's go in the case,
08:58and let's go in.
08:59Let's just change themeer and go in.
09:02So let's go in and make it a lot.
09:04So, this is the case
09:05so this is the DC Link circuit which is basic F7 which is the basic concept of which one
09:15is the F7 which I will see you can see so this is the two key key to see a
09:23nd 46 which is the two key key change I will see you change this to the key key
09:28So this is how we can do this.
09:42So we can do this.
09:44So we can do this.
09:57is
09:58so
10:00this
10:02this
10:03communication
10:06is
10:07this
10:08is
10:10this
10:12this
10:19this
10:21this
10:21this
10:36on
10:38we can see here on this one
10:43we can see here on this one
10:45we can see here on this one
10:58because it's 6x6
11:00IGBT OK is 100% OK is
11:04so now this is our
11:06PCB
11:07now OK is OK is
11:10100% OK is
11:12this is the problem
11:13this is where we had to repair it
11:15this is where we had to repair it
11:15we can see if we have to repair it
11:20if we have to repair it
11:21we can see if we have to do it
11:22but if we have to train it
11:25so this is my number
11:26so this is where we have to
11:28so this is 100% OK is
11:30so this is why I will see you
11:34so I hope you have to see
11:37I hope you have to see
11:38that I will be doing this
11:38with you
11:38this is what we have to do
11:46this is a PCB class
11:49repair
11:50you have to do it
11:52that we have to do it
11:55foreign
11:55yeah
11:57If you have any error, you can see an error, so you can see an error.
12:05This is a detail of the course for me.
12:10If we are professional, we will see here, we will see here.
12:17has a lot of money and there are some other people who are doing this
12:23I think that's what happened to me and these are the people who are in this
12:32way who are in this way and what are you doing here for a party
12:33here and how to go and get what happened to me so that's what happened to me
13:15is
13:16will be what you have come to a
13:20town where you go I can come to a
13:20town can't get where you make it
13:21come to a town pan
13:21so that you get it
13:23bring it out and go get it
13:26from a guy who says
13:27Chanukawa
13:27I want it
13:27I want to thank you
13:30I want it
13:31I want it
13:31I want it
13:31yeah I want it
13:34yeah what you can do
13:35I want it
13:36I want it
13:44I want to
13:46سنٹ کریں مجھ سے لیکن ویٹس ایپ پہ رابطہ نہیں کرنا مجھ سے کوئی کال نہیں کوئی نہیں کوئی میخos�
13:51اس پہ رابطہ کرے تو میں آپ کو ویٹس ایپ پہ اس کا لنک سینٹ کروں گا جو آپ کے
13:55لیے فیادے مند ہوگا شکریہ جی ویڈیو دیکھنے کا آپ عطاون کریں خدا حافظ
Comments