Category

✨
People
Transcript
00:00how to test the cam position sensor the cam position sensor sits against the camshaft pulley
00:06and it's how the ecu knows the position of the camshaft that's important because the camshaft
00:11delivers fuel to the cylinder it needs to know when to deliver the right amount of fuel to the
00:16right cylinder at the right time what we've got is a passive sensor here which is the ones that
00:20always have two pins and this creates its own ac electricity its ac voltage what it does is it
00:27creates a little magnetic field on the end of here and it's got works against something called a
00:32reluctor ring so a reluctor ring has high points and low points and as that magnetic field gets
00:36disturbed it creates a back voltage to the ecu there's different styles and this is another
00:41style here so as it goes through the magnetic field it creates a back voltage that then gets
00:46converted into binary like on the board there so a high point would be one volt and then a low point
00:53be a binary will be one and then a zero then a one and so on from that obviously as i say it can
00:58deliver the right amount of fuel to the right cylinder at the right time two ways we're going
01:01to test it then we're going to set the multimeter to voltage ac because it produces electricity and
01:07it's set to millivolts the lowest setting and all i'm going to do is disturb that magnetic field with
01:11the reluctor ring and see if it produces a voltage
01:14that's producing the voltage so the ec would get a reading from this camshaft
01:23position sensor the other way we can test it is to put it on that sound wave there
01:27that's continuity and resistance and as you can see from the board 200 to 800 ohms i'm expecting
01:34and that's got a resistance of 383.9 so that's well within range that's ready to go back in the car
01:40hope that makes sense see you in the next one