00:00A great way to improve the performance and appearance of your car is by installing wheel spacers.
00:06However, it is important to choose the right type of spacers and ensure that they are installed
00:11correctly to avoid any negative effect. Let's take a look at the proper installation steps.
00:17Using a cross-range loosen the stock bolt in the diagonal sequence, but do not remove them
00:22when combined. Using jet stand to support each end of the car is a better safety measure.
00:28To assist in removing the wheel hub, use a cross-range to remove the stock bolt.
00:34Install a wheel hanger, remove the wheel of the hub, and set it to the side.
00:39You can use a brake cleaner to remove them. Remove any rust and dirt from the wheel hub with a rug.
00:45Widen the entire surface to ensure it is smooth, because all of that surface may cause the wheel
00:50spacers to not fit perfectly with the hub. Install the bonus for the lightweight plus
00:55wheel spacers. Then install the wheel hanger. A key advantage of bonus wheel spacers is the lightweight
01:01plus feature. The benefits of the lightweight plus design are that the whole design is further
01:06optimized based on the traditional wheel spacers. It is an infected design that can reduce weight and
01:12energy consumption, and improve handling while ensuring safety and reliability. In addition,
01:18high-precision wheel spacers provide high-surface integrity. Effectively guarantee safety,
01:24stability, and reliability, and ensure a smooth installing experience.
01:30Install the rim and then install the extending wheel bolt. Use a torque wrench to tighten them on a wheel.
01:36Make sure they are secure. Remove the jack stands. Slowly lower the car until the
01:42tightness fully touches the ground, and remove the jack. Use a torque wrench to tighten the
01:47extending wheel bolt to the specific torque. Always tighten them in a diagonal sequence.
01:53This will ensure that the extending wheel bolt work. The same operation is done for the remaining wheels.
01:59After installing the wheel spacers, drive slowly back and firm, ensuring the rims are turned a few times.
02:06Bonus recommend checking the use of the wheel spacers every six months,
02:10and checking the vehicle's operation to ensure safe driving.
02:16Check in the vehicle's operation to ensure safe driving.
Comments