How to Manually Avoid Obstacles Using the EFT Flight Assistant APP

EFTdrone

When you're running an auto operation in the field,especially during spraying tasks,there might be unexpected obstacles on the route, like poles, trees, or something else. If you forgot to pre-set Barrier Points during the route planning,you can still handle it easily by manually flying around the obstacle via the EFT Flight Assistant App.

Transcript

00:00During an auto mode operation, if there are small obstacles such as a utility pole or a tree,

00:05please use the Flight Assistant app to manually control the drone for obstacle avoidance.

00:10Below is a Z20 example explaining the steps.

00:14When encounter an obstacle, tap Stop in the Flight Assistant app,

00:17or directly push the left and right stick on the remote controller.

00:20The drone will automatically exit the operation and hover.

00:23The drone will enter to Projection Point mode,

00:26and the app will display Breakpoint, Return Point 1, and Return Point 2.

00:30The labels are shown in the diagram, and the detailed steps are as follows.

00:35If the pilot accidentally touches the sticks, tap Breakpoint.

00:38The drone will automatically return to the breakpoint and operate.

00:42If the obstacle ahead is small, the pilot can manually fly the drone around it, then tap Return Point 1.

00:48The drone will move laterally to the route where Return Point 1 is located and continue the operation.

00:52If there are many obstacles ahead and it's not suitable to continue,

00:56tap Return Point 2.

00:57The drone will move laterally to the original route at Return Point 2,

01:00adjust its heading, and continue.

01:01For large obstacles at the field, Start or End,

01:04edit barrier points or adjust the route width to avoid them.

01:07Follow us to get more practical tutorials and updates.

Category

Transcript

Comments

Recommended