- 9 months ago
Stage Model : https://www.turbosquid.com/3d-models/event-stage-design-2009101
Studio Light Setup (Free) :https://www.turbosquid.com/3d-models/3ds-max-studio-light-setup-2241315
Hello Guys ! Welcome to Hive Production , before somedays one of my Subscriber ask me to design a stage , so I have created a Video about Stage Design ,
Rate Comment and Subscribe
Studio Light Setup (Free) :https://www.turbosquid.com/3d-models/3ds-max-studio-light-setup-2241315
Hello Guys ! Welcome to Hive Production , before somedays one of my Subscriber ask me to design a stage , so I have created a Video about Stage Design ,
Rate Comment and Subscribe
Category
🎵
MusicTranscript
00:00Hello guys, welcome to the Hype production.
00:10Before some days one of my subscribers asked me to model a stage tutorial.
00:14So this is for you.
00:16It's the 3ds max and I'm just going to draw a box with a box
00:2070 feet width and as well it's going to be 16 feet length and I'm going to give the height
00:27is 0.1 sorry 2 feet and I think we should give them 20 feet length.
00:34Yes, length will be good.
00:37So now I'm just going to central line them first and then take the new box
00:42and I will draw a box from the front view board which is approximately 10 feet width
00:47and their height will, sorry 10, 12, 20 feet width and height will be 10.
00:55I'm going to hold shift key and make a duplicate first and then I'm going to increase their parameters.
01:01First select them and I will change their parameters 25 feet and their length will be 12.
01:11So I'm going to put them here convert them into A table poly and I'll take the connection of two edges between of them like this from here and one edge from the, okay I will convert this shape here and one edge from the horizontal point.
01:38So it's going to be a one edge and I will put the one edge here.
01:43Fine.
01:44So we'll see them, it's going to be the frame of my screen SMD.
01:50I'm going to put them here, here and I'll take the polygons first.
01:55This is the poly-on, I'm going to make them extrude inside and after getting inside, I'm just going to select my screen, change its color so I can see the view board properly and I put them in the screen into the frames.
02:11So this is the frame with the screen.
02:14Okay, so go to the next, I'm going to copy this one with the old shift key and we'll change the parameter by 10 by 10 feet.
02:26It's going to be the square screen, put them here little bit on the top from the right side and I'm going to take another duplicate by holding shift key and scale up their size like this.
02:38Convert them into poly, set their vertices, spread it all like this, spread them and squeeze them from the top.
02:58So this is going to be two connection, two connection and then make it straight with the above scaling object.
03:10One is put them here, second one put them on the corner of this screen.
03:14Again, take the connection, two edges and set them.
03:20Also, spread a little bit of them like this, not too much, just a little bit, that's it.
03:29Okay, so I'm going to again give them a little bit depth and make them extrude inside and spread them from the back side like this.
03:44Okay, again I'm going to change the color so I can see screens separately in the viewport, put them here.
04:02Hold shift key and take duplicate from the left side as well.
04:05So we have these three screens with their three customized frame on the stage.
04:14Alright then, I'm going to take the box from the front viewport.
04:20I'm going to draw a box on the top of the frame of your front middle screen.
04:24I'm going to give them, convert them into poly.
04:31From the top side, I'm going to squeeze their vertices, just for the design, it's not a mandatory.
04:36It's just for the design, you just need to place it on and I'm going to place on the top of the screen.
04:43And also, we are going to create another box from the right side, convert them into poly.
04:51Take their vertices, put them here and here and also this one.
04:57So we have created this shape.
04:59This is the amazing shape like this.
05:02Perfectly done.
05:04Okay, I'm going to take another duplicate by holding shift key of this shape and placed some little bit changes.
05:16Like this.
05:17Kind of wings on the right side of the screen, like this.
05:23Okay, hold shift key and take the duplicate, mirror them and place it on here.
05:33Make them side slur with sides like this.
05:39Perfect.
05:40Okay, so we have these beautiful screens, SMDs with the beautiful frame wings like this.
05:48Furthermore, I'm just going to edit some line tool, create another frame behind of this.
05:56Like this.
05:57So we need to placed here.
06:00Perfect.
06:01Perfect.
06:02And now I'm going to put them extrude modifier.
06:06There is extrude modifier.
06:07I'm going to give them some depth and placed on the back side of this.
06:12Hold the shift key and take the duplicates and place it on here.
06:20Again, again, I'm going to take another line tool and draw them from the lines.
06:29It's this kind of that.
06:30And here, I'll draw this.
06:33Take the extrude modifier and put them here.
06:41Hold the shift key, take duplicates, put them on the right side of this.
06:46And now, what am I going to do?
06:52I'm going to take another box.
06:57Well, go to the box and I will draw a box from the top of your board with a box 20 by 20 feet.
07:06With the height 6 inches.
07:09So I'll give them here from the center and I'm going to rotate them.
07:13So I'm going to create the stairs, stairs of the stage.
07:18Hold shift key and take the duplicate with the same height.
07:22But we need to change their dimensions from length and width.
07:25Approximate 18 by 18.
07:28No, 15 by 15.
07:31That's good.
07:3215 feet difference.
07:34Good.
07:35I'm going to hold shift key, duplicate another one.
07:37And I'm going to give them same height with the different measurements.
07:42So I'm going to give the same height 0.6 inches.
07:47Make them 0.6 inches.
07:50Make them 0.6 inch and put them here.
08:00Take the duplicate.
08:01I'm going to give them 25 by 25 feet.
08:02So these are the four stairs on go to the stage.
08:07When you enter or when you go to the stage.
08:10But furthermore, let's see.
08:11This is the 3DS model of my stage.
08:13And this is the final output.
08:14If you really want to get this model.
08:15So go to the material square and you can get the link in the description.
08:20So this is the actual final output we are going to be.
08:26And it's the 3DS model approach.
08:28It's $30.
08:29So you can get this.
08:43Let's go back to the 3ds max.
08:46And I'm going to convert the my video under setting.
08:50So clearly you can see the screen.
08:52the screen you can have these kind of settings in your 3ds file so for getting this amazing result
09:00before that i'm going to go to another box which is approximately 4 by 4 feet tall
09:06placed on the stage on the right side of the corner and rotate them like this hold the shift
09:14key take another duplicate and another corner hold shift key take the duplicate place down here
09:27rotate them wisely like this perfect and now i'm going to go to the box first i'm going to create
09:37a podium so here's my box on the stage which is approximately three inches height and 3.6 inch
09:47width three feet six inch width and the length has to be two feet so i'm going to place on the
09:55stage like this and the whole shift key take the duplicate and will give them four feet height
10:01they are two feet width and their length will going to be two or three inches we need to
10:10adjust manually scaling and i'm going to give the height more i think we should give them more height
10:17okay take another duplicate with the five feet height of podium and i'm going to place
10:23this table on the top of the podium like this that's perfect
10:27okay so it's time for the texturing so i'm going to go to the material editor
10:36but one thing we need to make sure i'm going to go to the preferences and turn on the gamma ult
10:42because gamma is necessary okay so i'm going to give the video material select all of this th and apply
10:49the video materials all of them fine i'm going to select the frames give them video material
10:57go to the bitmap and here i have a color this one it's the dark black color not a full black color
11:06which you can call it stark gray color so i'm going to select all the frames and give them a color
11:14all the box smds give them color but on the back side of this stage model i'm going to give another
11:23better give them a reflection 0.85 glossiness and i'm going to give them another vera material
11:31oops sorry i'm going to give them mustard color
11:35so okay go to the width map and this is the color my mustard so i'm going to give them this color on the borders
11:46on the stage i'm going to give another black color
11:55six by six okay podium has to be this but their center body will be black
12:07okay so find another v-ray two-sided material i'm going to give the video material bitmap and we'll
12:16find out this smd screen so i'm going to select this screen and i'm going to apply this is the texture
12:22of my smd take the duplicate square square smd and i'll find out the square smd texture
12:31here it is so i'm going to apply a square smd texture here
12:35okay select those boxes i'm going to convert them into poly and i'll take polygons select them and
12:45assign the media material perfect i'm going to take the polygon select assign the material same thing
12:52switches i'm going to do here i'm going to convert them into eightable poly and then
12:58select them take the polygon select polygon assign media material select polygon assign media material
13:09convert them into poly this stage and i'm going to give them ring 2 connection
13:16properly take the polygon
13:21and go to the v-ray two-sided material here it is
13:24i'm going to go to the v-ray material and we'll go to the yellowish color like this
13:36assign them
13:40so take the stairs also take the polygons
13:45we'll be the six person
13:52okay select all the stairs convert them into poly
13:58take their polygons assign them now the next take their polygons assign them now the next take their
14:08polygon assign them and also take their polygons and assign them
14:14so we need to assign them these are the lighted stairs
14:20also the border of the top of the frame
14:24i'm going to assign this black color and take the another video materials called podium
14:30convert them into poly
14:34okay so i think we need to go to the podium this is the texture of podium i'm going to take the polygons
14:43take the polygon select the polygon and assign podium material
14:50so we have this stage settings i'm going to give them v-ray light first
14:55okay isolate their eyes light rotate them
15:05i'm going to isolate both of them light in the screen and i'm going to place the light inside of
15:09the screen give them 10 percent multiplier let it be yellowish light
15:14when you go to the options invisible lights and remove the checks from the effect from reflection
15:19place the light inside of the screen so it will glow like a screen
15:25perfect take the duplicate of the light
15:30duplicate of the light by holding shift key like this
15:34okay so give them length and width same should be the square lighting
15:44and place light here inside of it
15:46inside of it that's perfect hold shift key and take the duplicate
15:58okay take another duplicate of this light
16:01and i'm going to this time isolate the stage by alt q
16:06put the light here decrease their width increase their length or equal to this stage
16:16hold shift key and rotate your light by duplicate
16:27place the light here increase the decrease their length according to the stage
16:39hold the shift key and place the light on the right side of the corner as well
16:46okay perfect okay on this part we also have to add the light
16:55so i'm gonna take all these elements duplicate
17:00sorry isolate and you need to replicate the light here this
17:05oh fine so we need to in decrease their uh length rotate them here
17:11here placed here like this okay perfectly done increase their width
17:26but decrease their length
17:33like this and decrease their length like this
17:36and placed here to create glow on the wings another take a duplicate by holding shift key
17:53that's perfect i'm gonna decrease their width to place it properly like this
18:00and place it in here i'm gonna select both of the light hold shift key take the duplicate rotate them and placed here
18:17that's perfect
18:20okay take another duplicate of light by holding shift key
18:24and sorry
18:32we should place light here on the top
18:39also decrease their width
18:43placed here
18:45and hide all the elements so my stage is almost ready
18:48i'm going to place the light inside of this box smds as well
18:54so we need to
18:56placed here rotate them
19:02and match their
19:06dimensions no four by four feet
19:10i think we should place to
19:13properly inside of it so it's equal to the
19:15uh width and height so we need to decrease their width
19:19height length as well 3.6 feet
19:22and 3.6 feet
19:24so it's equal to the box inside of it and i'm going to place it here and
19:29again take the duplicate of the light by holding shift key
19:33so we need to
19:36place here and here
19:38okay and hide all take the duplicate of these lights
19:48mirror them and place down here
19:55okay so it's perfectly done i'm going to group them all these stage
19:59and now i need to import and merge my studio light setup
20:12here it is my studio light setup
20:16but before you will go to the studio light setup let me tell you you should go again to the
20:24my turbo squad and on the top you can see there's a studio light setup which is totally free for
20:29you guys and if you want this setup so you can easily go to the turbo squad create your
20:33account or gmail sign in and then download this
20:36free studio light setup and then import your object
20:39inside the studio light setup and you can see this is the amazing
20:43is the amazing render of your output
20:48so this is my stage according to your request
20:52and if you like this so subscribe my channel
20:55press the bell icon
20:56and thank you so much for watching switch rdl
21:01goodbye
Comments