00:00Hello, this is Dingbo Power. We'll guide you through the refilling coolant, engine, oil, and fuel.
00:07This is the fuel filler port. This is the fuel inlet pipe.
00:11Connect the pipeline securely for fuel supply. This is the fuel return pipe.
00:15After connecting the pipelines, loosen the exhaust screw and press the hand pump until all air is expelled from the pipeline.
00:23Tighten the screw firmly afterwards.
00:25Select the appropriate fuel grade based on the ambient temperature of the operating environment.
00:31Check the oil dipstick to ensure the oil level is between the low and high marks.
00:35Add oil if the level is below the minimum.
00:38This is the engine oil filler cap.
00:41Unscrew the cap before refilling.
00:43Ensure the engine oil is compatible with the engine model.
00:46Refer to the engine manual for specific specifications.
00:50Tighten the cap securely after refilling.
00:52This is the coolant filler neck.
00:55Critical note.
00:56Refill coolant only after the unit has fully cooled down.
01:00Refilling during hot operation may cause cylinder block cracking or coolant splashing each action.
01:06Fill the coolant to the specified level as indicated in the manual.
评论