En este video te muestro cómo reemplazar la tarjeta madre de la Lenovo ThinkBook G2 14 de manera segura y efectiva. 🚀
🔧 Herramientas necesarias:
- Destornillador Phillips
- Pulsera antiestática (recomendado)
- Espátula de plástico
- Nueva tarjeta madre compatible
✅ Pasos que cubriremos:
- Apagar y desconectar la laptop
- Retirar la cubierta trasera
- Desconectar los componentes internos
- Extraer la tarjeta madre dañada
- Instalar la nueva tarjeta madre
- Reensamblar y probar el funcionamiento
Recuerda seguir cada paso con cuidado y trabajar en un área limpia para evitar daños a los componentes. ¡Dale like 👍 y suscríbete para más contenido tecnológico!
Si tienes dudas, deja tu comentario y estaré encantado de ayudarte. 😃
🔧 Herramientas necesarias:
- Destornillador Phillips
- Pulsera antiestática (recomendado)
- Espátula de plástico
- Nueva tarjeta madre compatible
✅ Pasos que cubriremos:
- Apagar y desconectar la laptop
- Retirar la cubierta trasera
- Desconectar los componentes internos
- Extraer la tarjeta madre dañada
- Instalar la nueva tarjeta madre
- Reensamblar y probar el funcionamiento
Recuerda seguir cada paso con cuidado y trabajar en un área limpia para evitar daños a los componentes. ¡Dale like 👍 y suscríbete para más contenido tecnológico!
Si tienes dudas, deja tu comentario y estaré encantado de ayudarte. 😃
Category
🛠️
LifestyleTranscript
00:00Today we are going to change the motherboard of a Lenovo Dibu, this laptop was damaged by a
00:10low voltage that they received and well I had to buy the motherboard, this card is
00:18totally new, it's for the Lenovo Dibu.
00:23Okay, the procedure we're going to do is turn the laptop over, find a screwdriver
00:34and start removing the screws from the back cover.
00:53Now after we remove the screws, we are going to lift the back cover of the laptop,
01:08due to the lack of screws to be able to lift the cover.
01:16Next we are going to remove the battery from the laptop, we are going to disconnect it for safety,
01:38can no longer be connected for the motherboard replacement process.
01:46For that we are going to unscrew the card, the battery, we are going to look for a small palette to
01:56remove the connection straps from the motherboard and with a screwdriver we remove the
02:07screws from the laptop battery and remove the battery to work safely.
02:17With the plastic pallet we remove the connection straps very carefully, we lift the
02:39tab and remove the straps.
02:54Now we are going to disconnect the cables from the wifi antenna that are connected to the card
03:02mother and now we are going to disconnect some connectors that the motherboard has.
03:32Now we are going to remove the screws that secure the motherboard with the screwdriver.
03:53Now we are going to remove the screws that secure the motherboard with the screwdriver.
04:02And now we are going to remove the screws that secure the motherboard with the screwdriver.
04:29And now we are going to remove the screw to remove the fan or the fan that ventilates the processor
04:38and the graphics card on this motherboard.
04:43From the Lenovo Depot, here we remove the fan to be able to take out the motherboard.
04:58And we disconnect the strap.
05:05This is the one on the screen or monitor.
05:12Now we proceed to remove the motherboard from the laptop.
05:19Now we proceed to remove the motherboard from the laptop.
05:34We need to remove this screw to be able to remove the motherboard from the laptop.
05:43And replace it and put in a new motherboard because it was damaged.
05:47This received a low voltage and the laptop's motherboard was damaged.
05:53Here is the laptop motherboard.
05:58Here's the motherboard, the one from Lenovo Depot that's damaged.
06:03This card has a short circuit.
06:05So I came and bought a new card.
06:12Now we are going to install the new motherboard.
06:18We lift the laptop straps to carefully connect it.
06:39Now we are going to connect the video cable to the laptop monitor or screen.
07:07We lift the laptop battery to carefully connect it.
07:14Now we tighten the FAM screws and then connect the battery.
07:29We plug the battery connector into the motherboard.
07:34and we put the screws on it
07:54we tighten with the screwdriver
08:04and we put another screw that goes to the motherboard to hold the card
08:22Now we are going to install the hard drive, for this we are going to remove the hard drive that is installed
08:28to the motherboard that was damaged by removing the screw that holds it in place to install it on the card
08:40from a new mother the hard drive
08:42We install for each card and we are going to place the hard drive
08:51Now we are going to put the screw to hold it to the card
09:21we check and tighten all the screws
09:47from the motherboard
09:50Now we are going to put the back cover on the lacto to finish assembling it.
10:11We press and place the screws with the help of the screwdriver
10:41Now we are going to turn it over to turn on the lacto
10:55we are going to connect the charger
10:58the cable to the lacto to turn it on
11:02so that the battery is charged
11:04that is downloaded
11:06Here we can see that it is already starting to load the lacto
11:16let's open the screen
11:24from lacto
11:26to turn on the lacto
11:30we press the power button
11:34has already started
11:36already has life
11:40As I told you, the motherboard has been damaged by low voltage.
11:47And well, I had to buy a new motherboard.
11:52because I couldn't find a way to repair the motherboard
11:55in the city where I live
11:58comfortable technicians were brought to him
12:05and no one could repair it
12:07because I didn't have the spare parts
12:09because the components that were burned
12:12and well
12:13there Windows started
12:14perfectly
12:18Well
12:19if you liked my channel
12:21help me with a like
12:23and subscribe
12:24until next time