How To Add Audio Effects, Mixing And Exporting In Ableton Live 11 | Music Radar - video Dailymotion

Music Radar

Tutorial using Ableton Live 11 Lite with Ski Oakenfull - part of the Music Radar series

Transcript

00:00Hi everyone welcome back to this final part of this video series on getting

00:04started with Ableton Live Lite. So in the last video I showed you how to add a

00:08vocal sample to the track. In this video we're going to finish off the track by

00:12adding some audio effects, building up a quick arrangement in session view and

00:15then recording our track into the arrange view so we can export it. Let's

00:20go. Okay so let's try adding some audio effects to some of the tracks. Now if we

00:25go in the browser to the audio effects section you can see that the audio

00:28effects here are grouped into lots of different categories. So we have delay

00:32and loop, drive and color, dynamics, EQ, pitch and modulation, reverb and

00:39resonance and some utilities as well. So all of these add different characters to

00:44the sound and for example reverb this allows us to create different spaces so

00:49we can make an audio recording sound like it's playing inside a cathedral, a

00:53concert hall or just under a tunnel for example. So let's try doing that for this

00:58vocal sample. So I'm going to click on solo and let's just go into the second

01:02scene and I'm going to just drag over the reverb onto that track there. There

01:12we go so you can already hear that it's having an effect is making it sound like

01:16it's in a bit of a bigger space. We can increase the decay time and we can also

01:22change the balance between the original dry signal and then what we call the wet

01:27signal which is the reverb. And if we listen to that in context with the rest

01:35of the track. Now what we're doing is mixing the track. We're trying to get a

01:48good volume balance between the different channels but as I mentioned in

01:51a previous video we do have to be very careful that we're not going to go into

01:55the red and clip. So I'm selecting all of the channels here while holding down

01:59shift and I'm just going to bring down the level very slightly just to make

02:04sure that on the right hand side we're not clipping and going into the red. Now

02:08another effect I quite like to use on this vocal sample is a delay. When we

02:12added the reverb effect we use what's called an insert so we inserted it

02:17directly onto this track. With these returns it means that we can actually

02:21share effects between different tracks by using these send controls here. So as

02:27part of the template set I used you can see that I already have a reverb and

02:31delay effect on each of these return channels. So I'm just going to use return

02:36B which is this delay. I'm just going to solo this and you'll see that as I

02:41increase the send amount here on this track it's sending more of this vocal

02:48channel to the delay effect on return B.

02:54Let's just turn off the reverb for a minute so we can just hear it better.

03:00There we go. Now we can adjust some of the controls on here so feedback

03:04controls how much it delays and we can also set the timing of the delay. So I'm

03:10going to change the beat division here to quarter notes. I also want to add some

03:18filtering so that it's taking off some of the low-end frequencies great. So

03:32let's put the reverb back on now and take the solo off.

03:38So that's sounding quite lush now that vocal. The next thing I want to do is to

03:52also add some reverb to this mini-log. Now you can see that it's automatically

03:56named these tracks according to the presets that I was using but it hasn't

04:00done that for this track which is the mini-log. So we can do that ourselves.

04:04Good to do some housekeeping. So I'm just selecting that track there and I'm going

04:09to select command R and that's going to allow us to type in the name of this

04:14track. So I'm going to type in mini-log. There we go just so we know what it is.

04:18Great so let's just solo this. We can try adding some of that delay to this sound

04:27as well. Great and let's let's put some reverb on that as well why not. Maybe

04:42slightly less of it there. And this is where we can start adjusting the volume

04:54levels as we go. So I'm feeling now that that riff is a little bit too quiet and

04:58maybe the vocal is a bit loud so I'm just going to adjust those. Now let's go

05:07way back to the drums and I want to make those drums sound a little bit punchier.

05:13So we can go to the audio effects here and utilities and audio effects rack and

05:21there's a section here called mixing and mastering. And this looks like an

05:27appropriate preset it's called drums punchy. So let's drag that over there turn

05:36it off and on so we can compare. Now it sounds to me like it's slightly

05:46increasing the high frequencies there which means that the hi-hat sounds a

05:50little bit louder. So let's try bringing down that hi-hat which is here just very

06:00slightly. Brilliant we can also add some basic mastering and mastering is

06:09normally the final stage of the production where we want to make the

06:13track as loud as possible and sound as good as possible on the radio or in a

06:17club. So we can stay in this mixing and mastering section here and let's choose

06:23master punchy dance and just drag that onto the master channel there.

06:41Okay so what we're going to do now is we're going to do a very rough

06:45arrangement in the session view and then record that arrangement live into

06:51the arrange view. So this is where we can start working with these scenes a little

06:55bit more and duplicating some and taking out some of the clips to create a very

07:01rough arrangement. So I'm going to take this first scene here and I'm going to

07:06duplicate it a couple of times and let's start the song without the beat. So I'm

07:12just going to delete that first clip there and let's take out this pad maybe

07:17as well and also the mini-log. So we're just starting off with the vocal and the

07:23bass. Great and let's go to the second scene now take out the drums and maybe

07:33the mini-log and let's just bring in the pad sound. Okay and then we can bring in

07:46the beat maybe we'll hold off on the mini-log as well. Turn up the vocal

07:56slightly, turn down the beat slightly. Now this is where the drums come in but

08:10we've also got that mini-log so I'm going to duplicate that scene and then

08:14just save that mini-log arpeggio so we just have the additional 16th hi-hats

08:20coming in at that point and then bring it in here.

08:34And I'm going to duplicate it again and this time I'm going to take out the

08:37drums so we just have a little space. So we then go into the piano section.

08:45Here we go. Great so we've got a very rough arrangement and what we can do

08:56now is we can record it into the arrangement view. So just so we can get

09:00all the tracks in view I'm going to press this H button here which is the

09:04optimize arrangement height and let's go back over here and we're going to hit

09:10record and we're going to trigger these scenes and it's going to record them

09:14into the arrange view. Now one final thing that we can do before we actually

09:17record it in is play around with the tempo. So at the moment we're at 120 which

09:23is a very classic kind of house tempo. Let's try increasing it a little bit.

09:33Maybe 125. There we go so that gives it a little bit more energy. So this time I'm

09:41going to press this arrangement record button and we're going to trigger the

09:45first scene. Now I'm going to flick over to the arrange view here and you can see it

09:54recording in.

10:05Let's try the next one.

10:41So if we now go back over to the arrange view you can see that every

11:02action I made has been captured and if we just press the back to the arrangement

11:05button here we can then play the track from this arrange view and this is where

11:17we can really refine our arrangement and we can take things in and out we can

11:22change lengths of the clips we can do all sorts of things. So how do we get

11:26this out to the world? How do we get people to listen to the demo that we've

11:29just done? What we're going to do is we're going to export it. So the first

11:33step for this is to go to the loop brace here so just drag the loop start to the

11:39start of the track and the loop end to the end of the track and then we're

11:44going to go to export audio and there are various settings here we can turn

11:49the analysis file off we can put normalize on that's going to make it as

11:54loud as possible and you can select the file type as well we'll keep that as a

11:59WAV and click on export and you can select where you want that to go so

12:10let's just open this up a little bit this is the project that we were working

12:14on let's select that call it house beat one and then save

12:23and let's look for that file now so let's go to here Ableton projects

12:29house beat and there is our file house beat one and we just press space to audition it

12:52there is our track and we can upload it to soundcloud or send it to a record label

12:56or send it to a vocalist and develop the track further now one final very important thing i

13:01wanted to remind you of is to save your project so go up to the file menu and click on save live set

13:11and that means you can come back to the project and carry on working on it

13:16okay so there we are i hope you enjoyed this series of videos on Ableton Live Lite

13:20and it gave you the confidence to start producing your own tracks

13:23please have fun experimenting with your own ideas and i hope to be back soon

13:53you

How To Add Audio Effects, Mixing And Exporting In Ableton Live 11 | Music Radar

Category

Transcript

Be the first to comment

Recommended