00:00Assalam-o-Alaikum, This is F6 Error Kit. It comes in DOLLARS, PELL, JINGHOROBA and CANVAD.
00:13In this, F6 Error is coming. We will run it. After running it, we will see and test that
00:19in which time F6 Error comes and in which time it comes.
00:24I have turned it on.
00:28Now, I am turning it on with the remote.
00:33At the same time, this is our compressor. It is turned on.
00:37See, it catches the speed file immediately.
00:41F6 Error comes on the display.
00:45At this time, this kind of error is coming.
00:49It is very wet in the weather.
00:51Because of this, this error is coming.
00:53Sometimes, some error comes in some kit.
00:58See, the compressor is also turned off.
01:02This is F6 Error.
01:04Now, we will turn it off. It will not be turned off automatically.
01:07And there will be no problem.
01:10Now, I have turned it off.
01:12Now, let's see why F6 Error comes.
01:15First, let's see whether F6 Error is there or not.
01:19See, this is F6 Error's sensor.
01:23F6 Error is the ambient temperature sensor of this sensor.
01:28It is installed in DOLLARS, PAL and ORID.
01:31See, this is the Ultron kit.
01:34F6 Error comes because of this sensor.
01:39Now, I will check the value of this sensor.
01:43Now, let's see whether it is correct or not.
01:49I will keep the meter at 20K.
01:53Now, I will check the value of this sensor.
01:57I will check the reading from here.
02:00Now, the reading is 11K.
02:06This sensor is 100% correct.
02:10There is no problem in this.
02:12Now, see this.
02:13First of all, this is the thing to see.
02:15See, I install the sensor in this way.
02:18So, these two pins on this side.
02:20See, this one is installed on the side.
02:23Check these two pins here.
02:26You can see two pins here.
02:29This is the one on this side.
02:30See, it will be installed on this side.
02:32This is the one of this.
02:34Its ambient temperature sensor.
02:36Now, I will check this.
02:39First of all, I have to check the voltage.
02:41I am checking it because of you.
02:42The voltage is complete here.
02:44There is no issue of voltage here.
02:46In this condition, you must have seen that
02:49how to check the voltage.
02:51Although, I have seen very little issue of voltage
02:55that there is no voltage due to voltage.
02:57And this is the problem.
02:59Now, I will install it in the same way.
03:02When I install it, it comes at the same time.
03:04See, how many voltages are there.
03:06Let's see the variance.
03:08It has 5 voltages.
03:10And 5 voltages are present in other sensors.
03:13See, it is complete here too.
03:15And there is voltage in this sensor too.
03:18Actually, the problem is in the voltage.
03:23And the problem is in the sensor.
03:25I have made a movie on this sensor.
03:28You can watch it completely.
03:30I have made a video on this on my channel.
03:33Now, I will check the rest of it.
03:36I will install the meter at 20K.
03:38I will install the meter at 20K
03:40and check the rest of it.
03:42In such a condition,
03:44it often happens that
03:46from here to here,
03:48the value of the SMD
03:50which comes in this way
03:52is usually devalued.
03:54When it is devalued,
03:56then this error starts to occur.
03:59Now, let's see it here.
04:01See, I am checking its SMD.
04:04There is some fault in it.
04:06It is here.
04:08Momin, this fault comes from here.
04:10See, it is completely fine.
04:12Now, check this in this.
04:14See, this is also fine.
04:16Now, let's check the other one.
04:20See, this SMD of this
04:23This SMD is broken.
04:26Because it should also show 10K.
04:35See, the value of this SMD
04:37has been devalued.
04:39It is showing very less.
04:41There is a fault in it.
04:42We will change this.
04:43Now, after changing it,
04:44I will see it again.
04:45I will change it.
04:46I will show its video again.
04:48See, it is also fine.
04:54We have changed this.
04:55Now, I will run it and see
04:57what it does now.
04:59See, immediately,
05:01the error of F6 comes.
05:03I have switched it on.
05:05It is switched on.
05:09See, it is cleared now.
05:11If you like my video,
05:13then like it and share it.
05:15If any brother wants to take training,
05:17then he can do training here.
05:19He can come to us and see.
05:21The whole system is available to us.
05:23Now, the error of F6 is cleared.
05:27If
05:29you want to ask anything,
05:31you can ask me.
05:33I have my number.
05:35Thank you for watching the video.
05:37Good bye.
Comments