00:00Hello and welcome back. This part as I said we need to colour the strip down the side
00:07of here. If you are watching my videos as I said I very much appreciate it. It is a
00:11video log anyway so I need to do the video just for any future references. So as I said
00:15I need to colour this the same colour as this. I need to do this border down here. It is
00:20not there yet. I need to chop this part out and put a little white there and join that
00:26down there. That's what we need to do. So first of all we need to hide the house because
00:33we need to go over here. Now as you know if you are watching the videos, if you haven't
00:40been watching the videos you probably won't know where I am. So I need to go to my tool
00:46and select on the edges of the building, the edge of the actual slab. So this is like the
00:53foundation basically for the house. Basically that's what this is. Except I am making the
00:58corner a different way around. Sometimes I make my geometry back to front. Sometimes
01:05I do. Just because sometimes it is actually easier to do that. So I want to bring it to
01:14here and I do need to bring it to there but I need to chop that. So I am still going to
01:22bring it to there. So what I need to do is go back to the top view. I need to find the
01:27edge. So it is one square out. So I need to go to extrude. Extrude it one square. As I
01:40said it is only one square. So go down to here. Now here is a tricky part. So what I
01:49need to do is fill in this little part here. So how I am going to do this is I am going
01:55to hold the key. I want to go here and not there. I want to go right in that corner.
02:02I need the corner right there. Go to points. Click that corner. Click this corner. Do this
02:12corner and this corner. Join it. Now this sounds kind of crazy. Go over here. Press
02:20this line tool. Drop a line in it. Enter. Leave it like that. That's top. As I said
02:28this is my kind of way of cheating. Now I want to go here. Select the two points. Bend
02:34this down here. Now of course I needed to touch that. So what I want to do is go here
02:41and delete this point. So I have only got one point. Bring it back down and you see
02:47that line now. Keep it straight. Make it straight that way. Make it straight that way. So we
02:56have got a floating little strand. Nothing. I think it is lovely. It just makes nice easy
03:05work of the corner. Here not there. Here and here. Fill that. As I said it makes a
03:18difficult corner. Nice and easy. Put there and there. And there we are. A lovely corner
03:28How is that for a cheat? Well that's lovely. I just like when things work like that. Now
03:36of course if you look at this side. So what I need to do now is go back on top view. I
03:44need to find where that box is that I can't actually see. I'm going to work from this
03:53view as I can't actually see it. Go back to line tool. Skip that one and go here. I'm
04:02only telling you to skip it because we need to join it. Not that one. This one. Here and
04:24here. As I said. Now what I want to do here. Flip it to the side. Look at the box. Extrude.
04:36Extrude it down one square. Of course it's not going to extrude it in. It did. What amazing.
04:48I said this would be the curve basically around the house. Well it wouldn't be the curve around
04:54the house. It would be. In my world it's a curve around the house. But it's not really
05:01a curve around the house. But it is like a foundation basically for the house. So you
05:07could call it a curve. Now this one I'm going to cheat again. Because I need to cut the
05:15slab. I can't cut the slab because I need to keep the lip. Actually maybe I don't. Is
05:28there any more? No. I can actually chop the whole thing. That's great. So what I want
05:35to do is go over to this side. Select all of this and chop it. Get rid of it. Of course
05:41it's going to leave the foundation. This is how I get my skeletons by the way. So you
05:48know if you want to make a cloud. Just delete the thing. Maybe I just want to do that. Where
06:03is the thing? Give me a second. I've kind of lost myself for a second. I want to redo
06:13that one. I'll redo that one. I've kind of lost myself there for a second. Because I've
06:33kind of looked at the wrong thing. I was looking at something else and obviously it's going
06:38to be a little lag. But it makes you do more effort and you can do this a little bit easier.
06:44Zoom out a little bit. Back in. I said that we can't delete the edge of this. We have
06:56to keep it. We don't want this part. This part. Now you see when you get here. We have
07:11to get close but we can't get too close to it. Because we won't have none of it. Now
07:26if I get rid of that it's going to delete that line. I've got really no choice after
07:36really. It doesn't really matter because I'm still joining. I said I'm not trying to do
07:42poor work and especially in the little cracks like that. And there's one there. Oh there's
07:50three of them. I said don't delete the slab. I'll leave that one for a moment. I said because
08:18it's really kind of skinny. Let's stretch that over here. Let's bring back that surface
08:30for a moment. You know what it is? It's further down. I'm being too careful. I don't want
08:43that one. Actually what I might be able to do here. Just so I can actually cheat. I can
08:53put this in here. Which is going to be kind of great. I'm going to zoom out for a second
09:01so I can see where the road is. I don't want the road. I need the pavement. That's the
09:10road there I think. Move this to here. Turn off snapping because it's cornered just slightly
09:21to correct. Let's have a look at that. That's definitely the guttery. If I chop it there.
09:40Just looking at it. Don't forget I don't have to add the guttery. I think I might actually
09:54have to. I'm going to have to add the kerb. That's what I'm going to have to do. So I'm
10:02going to have to bring the kerb up. How does that work? Let's have a look at that floor.
10:22But there's something not quite right with that. Where's the kerb? Let's turn that off.
10:32The kerb is here. Go back to here. Ah, here it is. I'm going by the actual kerb. By the
10:46road. I'm not going by the road. I'm going by the actual slab. I was looking at the wrong
10:51one. Which is kind of great for me because it's going to save me a bit more work. I thought
10:58actually, you know what, I thought I put the surface too far down in the hole. That's what
11:05I don't really want to raise the surface. So leave that there. Go back into wireframe.
11:19What are you doing? Give me a second. I need to click on this one. How come I can't click
11:39it? How come I can't click on it? I don't know. I'll just save that. What if I accidentally
11:59crash? Can I click anything? No, I can't click nothing. Crash. See, I can't seem to
12:11basically do anything. It's gone and crashed. See, I can't click on anything. I can't edit
12:24nothing. I can't select nothing. OK, Blender's crashed. Thank you Blender. Anyway, what I'm
12:33going to do, off the video, I'm just going to delete this little piece here. What I'm
12:37going to do is select this little box. Select the end bar. I can select it or I can't. I
12:42can't click it or I can't do nothing to it. Thanks Blender. But anyway, all I do is select
12:49this part, delete this part, grab the end of that, pull it to the end of here, pull
12:55the road to the end of there and then in the next part I'll be just basically splitting
13:01the edge of that, changing the colour of it so it blends with that and then basically
13:07colour the slabs. So we can do that and then we just pull the edge of this down, play around
13:13with it and that's it. That will be the end of the video. So come back in the next part
13:19and you'll see me basically modifying this last little bit here. I'm not going to modify
13:24it now. I'll do it in the next video. So I'll modify this part. I really truly apologise
13:29for the crashing. There's nothing I can do about it. So as I said, when you come back
13:33we'll chop this, we'll pull this and then we'll fix the edge of that and we'll colour
13:37in the slabs and the pavement. That's it. The end of the video. As I say, thanks very
13:43much for watching. I very much appreciate you. Again, I apologise for the crashing of
13:47the Blender. It's one of those things. Anyway, see you soon. Bye.
