00:00As-salamu alaykum, today we are going to repair a kit.
00:08This kit has come from Sindh.
00:12It has come from very far.
00:14This brother has sent it.
00:16The problem is that he said that there was an error of F1.
00:19He went to repair it.
00:21Now, there is an error of F9.
00:24There is an error of F9.
00:26He has sent it here.
00:28Let's see if it is fixed or not.
00:30What is the problem?
00:31Let's open it and see.
00:56The problem is that there is an error of F9.
00:59He has sent it here.
01:01Let's see if it is fixed or not.
01:26This is the kit.
01:38Now, there is an error of F9.
01:41There is an error of F9.
01:47There is an error of F9.
01:49This kit is used by many companies.
01:55There are other companies as well.
02:02All companies use this kit.
02:04If there is an error of F9, then it can come.
02:08I will clear the error of F9.
02:10Let's see the reason for the error of F9.
02:17First of all, I will check whether these two SMDs are fixed or not.
02:28These two SMDs are fixed in the error of F9.
02:32These two SMDs are fixed in the error of F9.
02:37I am checking whether these two SMDs are fixed or not.
02:40I will show you the camera and meter.
02:46First of all, I will check whether these two SMDs are fixed or not.
02:53I am checking whether these two SMDs are fixed or not.
02:55These two SMDs are dead.
02:57These two SMDs are fixed.
02:59These two SMDs are dead.
03:02These two SMDs are dead.
03:07I will clear the error of F9.
03:14I will clear the error of F9.
03:16I will clear the error of F9.
03:18I will clear the error of F9.
03:23I will remove these two SMDs.
03:26I will remove these two SMDs.
03:33I have changed these two SMDs.
03:40Now, I will check whether these two SMDs are fixed or not.
03:46I will show you the problem of these two SMDs.
03:53I will check whether these two SMDs are fixed or not.
04:04These two SMDs are fixed.
04:11These two SMDs are fixed.
04:14I have cleared these two SMDs.
04:17It had an error of F9.
04:19Now let's run it and see
04:21that the error of F9 has been cleared.
04:23See this is the wire
04:25of its communication. This is the one.
04:27I put it here.
04:29And see this wire
04:31this one came to
04:33L here and this came
04:35to it. Okay.
04:37Now all these wires are connected to it.
04:39Now comes the next step.
04:41This is its reactor.
04:43I put it here.
04:45I put it here.
04:47If you like my video
04:49then like it and share it.
04:51And if you are new
04:53then do subscribe to my channel.
04:55If any brother wants to learn
04:57then he can contact us.
04:59So that if anyone
05:01wants to learn
05:03then he can come and learn.
05:05See this I have put it here.
05:07All the companies
05:09who come here,
05:11all of them have put it so that
05:13if anyone comes to us
05:15then we can attach it
05:17to the compressor and run it.
05:19Now the problem is that
05:21whatever error comes, it will come immediately
05:23and it cannot be removed immediately.
05:25If we don't repair it.
05:27And as you know
05:29that they sent it to you.
05:31There was no heat sink with it.
05:33It just came open like this.
05:35Now we just have to run the compressor
05:37once and turn it off because
05:39if there is an error, it will come at the same time.
05:41If not, then
05:43your error will not come like this.
05:45Yes, now I run it
05:47and see if that error comes
05:49or not. Let's see now.
05:51If the error
05:53has been cleared, then it will run.
05:55If not, then this F9
05:57or whatever error will be there,
05:59we will know that
06:01this error is there.
06:03Now see this, we have also installed the sensor.
06:05The compressor has been installed.
06:07And from here you can see that
06:09this sensor is our own.
06:11We have also installed this.
06:13And after this,
06:15all these things are also installed.
06:17Now I
06:19have started running it.
06:21Now after completing all this,
06:23now all the things of it have been completed.
06:25Now let's run it
06:27and see if it turns on
06:29or not. The error of F9
06:31is clear.
06:33If
06:35the error of F9 has been cleared,
06:37let's see now.
06:39Let's turn it on.
06:41See this.
06:43First of all, see these lights
06:45have been turned off.
06:47And
06:49after this, let's do it.
06:51See this.
06:53This compressor is open.
06:55That's why I can't run much.
06:57The compressor has been turned on.
06:59The error of F9 has been cleared.
07:01It has completed the speed and I
07:03turned it off with it.
07:05Because it is open
07:07and there is no heat sink.
07:09This is the heat.
07:11There is still a lot of heat.
07:13If I run it like this,
07:15then this microprocessor will burn.
07:17That's why it should not be run open.
07:19Because its speed will increase
07:21and it will burn.
07:23See this. Thank you.
07:25And
07:27if you like this video,
07:29then subscribe to our channel.
07:31And like it
07:33with your friends. Thank you.
07:35Goodbye.
Comments