00:00Assalamualaikum, this is Daikon kit.
00:04The problem with this is that the compressor starts and stops after a short time.
00:11This kit is for repairing.
00:13When we tested it, we found that this reactor is not working properly.
00:22This is the remote of Daikon.
00:25This is the kit.
00:27This is the special meter.
00:32This is the model number of the meter.
00:34We checked it with this.
00:36The normal meter will not tell if it is working properly or not.
00:39When we checked it, it was not working properly.
00:42Now I will remove it.
00:44I am going to do the desoldering with this.
00:48When I will do the desoldering, I will remove the reactor.
00:56I have one more kit with me.
00:59I will remove it from the other one.
01:13All the rods have been desoldered.
01:15It will come out easily.
01:23See, it came out.
01:26This is broken.
01:28I have another big one with me.
01:32This is broken.
01:34Now I will do the desoldering with this.
01:39See this.
01:42Now I will do the desoldering.
01:46Let's see.
01:55Let's see.
02:02Let me show it to you.
02:04Let's check it.
02:06Genuinely, it has a bad view.
02:08There is no judgment at all.
02:10It has been desoldered.
02:12It has been desoldered.
02:14Now we have installed it.
02:16Now I will see it by running it.
02:18I will communicate with the compressor.
02:20This is the old one which was broken.
02:22There is a video on my channel.
02:25How the reactor is tested.
02:27How it is checked.
02:29It has to be checked with an ordinary meter.
02:31If you take this meter,
02:33it will be checked with this meter only.
02:35If you check it with an ordinary meter,
02:36it will give you a buzzer.
02:37But you won't know if it is good or bad.
02:39That's why I am showing you the model number of this meter.
02:42So that you can take this meter and check it.
02:45If you want to check any reactor,
02:47if you want to check the connector,
02:48if you want to check the choke,
02:49if you want to check anything,
02:51you can check it with this meter.
02:53Now we have completely communicated with it.
02:56When the compressor started running,
02:58it tripped at the same time.
03:00Let's see if there is any short in it.
03:02Let's check it now.
03:04Let's see.
03:06Let's check it now.
03:08If there was a short in it,
03:10it wouldn't have turned on.
03:12I will put the meter in buzzer mode.
03:14I have started checking it.
03:16This is fine.
03:18The diode must be fine.
03:20There is no problem in it.
03:22It is coming because of the capacitor.
03:24Let's check its IPM.
03:26Let's put it here.
03:28As I have already made a video.
03:30It is on your channel.
03:32You can watch it.
03:34Let's check its low side.
03:36Let's see if there is any problem in it.
03:38There is no short in it.
03:40Okay.
03:42Now it has IGBT.
03:44It has 40 and 60.
03:46This is also a short.
03:48And this is also a short.
03:50It is possible that
03:52one of them is a short
03:54and the other is fine.
03:56But I can't find it out.
03:58I can check it by removing it.
04:00But it is possible that
04:02we should not remove it.
04:04I can check it by cutting its leg.
04:06It can be one or both.
04:08But one is more likely
04:10to be a short.
04:12I have cut one of it.
04:14I have cut one of it.
04:16Now I will check
04:18if there is any short in it.
04:22There is a short.
04:24But I will check it.
04:26That's why I have separated it.
04:28Just because of you.
04:30Because the video will be long
04:32if I remove it.
04:36This is fine.
04:38And this is a short.
04:40Okay.
04:42This is fine.
04:44And this is a short.
04:46But until we check it,
04:48it is not burnt.
04:50Now I have put it on a davenport.
04:52When I put it,
04:54I will check it like this.
04:56It is fine.
04:58This is fine.
05:00But this is a full short.
05:02This is a short.
05:04Now we will join it
05:06like this.
05:08But I will remove it.
05:10But I will remove it.
05:12Then I will remove the leg
05:14and put it again.
05:16See this.
05:18It is out.
05:20It is out.
05:22Now see this.
05:24There is no short in it.
05:26See this.
05:28This is an SMD.
05:30You have to check its number.
05:32Sometimes when there is
05:34a problem like this,
05:36it can be a short.
05:38We have to check it.
05:42See this.
05:44This is also a short.
05:48Okay.
05:50This is used as a fuse.
05:52But it is fine.
05:54Now I will put this.
05:56And I will put this new.
05:58Now with the help of a sucker,
06:00we will remove it.
06:02After removing,
06:04this is the one.
06:06This is also burnt.
06:08This is also burnt.
06:10Now I will remove it.
06:12Now see this.
06:14I have removed the IGBT.
06:16This is right.
06:18This is also fine.
06:20First I will leave it because of both.
06:22Now see this.
06:24The method of this is
06:26that you have to put it
06:28like this always.
06:30And whenever you have to put
06:32something like heat sink,
06:34you should never do this.
06:36You can do it.
06:38You can put a lever here.
06:40If you put a lever here like this,
06:42you can cut it.
06:44You can put everything.
06:46But still,
06:48there can be a problem.
06:50There can be a problem.
06:52There can be a problem.
06:54So I will do it first.
06:56See this.
06:58Now I will show you
07:00how to do soldering.
07:02See this.
07:04If I leave it like this,
07:06it will fall.
07:08I will temporarily bend
07:10its leg a little.
07:12So that it does not fall down.
07:14So I will put it
07:16in its place here.
07:20See this.
07:22Now I am putting
07:24its screw
07:26so that it sits
07:28in its alignment and base.
07:30Because
07:32everything else is on its own line.
07:34So to make it better,
07:36you can put
07:38the component next to it.
07:40So that there is no
07:42difference in alignment.
07:44See this.
07:46I have put it here.
07:48Now I will do soldering
07:50with the help of soldering iron.
07:52I will show you how to do soldering.
07:54After soldering,
07:56I will do all the work.
07:58I will do all the work.
08:00Then we will try it.
08:02Because it was a shard,
08:04it was not supposed to work like this.
08:06I will solder all three.
08:08These three will be soldered.
08:10Now see this.
08:12Check it.
08:14The main thing to see is
08:16that no one can judge
08:18that any work has been done
08:20again or it is genuine.
08:22Okay.
08:24We have put this.
08:26Now we will open it.
08:28After opening, I will give it
08:30one more current.
08:32You can also give it like this.
08:34No issue.
08:36No problem.
08:38But let's open it.
08:40Because I don't know
08:42if the base is good or not.
08:44So that we can check it.
08:46It is better to open it.
08:48Let's run it like this
08:50once.
08:52So that our time is saved.
08:54I will put all the screws.
08:56I will put all of them.
09:00The main thing
09:02of this is that
09:04any fault or any kit
09:06its main thing is to trace.
09:08That is important.
09:10Everything happens.
09:12The kit will also be repaired.
09:14But you just don't do this.
09:16So many people watch the video.
09:18If you like it,
09:20this time do it.
09:22No one will work
09:24and show you.
09:26No one will do like this.
09:28Look at this.
09:30It has a screw.
09:32Now we will do
09:34the whole story of this kit.
09:36Today I will also tell you
09:38that what is the whole story
09:40of this kit.
09:42You have to watch this video till the end.
09:44One story is very good.
09:46These three kits came to us
09:48for four rupees.
09:50Today I will tell you and show you.
09:52You have seen this kit.
09:54I have repaired it in front of you.
09:56This kit came from many places.
09:58From many places.
10:00But thanks to Allah that we have
10:02repaired it.
10:04Now the kit will work.
10:06And it will work 100%.
10:08It is a sure shot.
10:12We have put it.
10:14Despite this, there is a little
10:16serious light.
10:18There is a problem.
10:20Now I will check
10:22if there is anything wrong.
10:24This is also fine.
10:28This is also fine.
10:30And this is also bad.
10:34Now I will change the polarity
10:36and check it.
10:40Now we will check it like this.
10:42Let's check it like this.
10:44Like this.
10:46Like this.
10:48One of its rectifier
10:50is burnt.
10:52Now we will remove it.
10:54Now this is the problem.
10:56As you have seen in the video.
10:58I have done LGBT testing.
11:00And along with it, I have done
11:02HIV testing.
11:04Now I will remove it and show you.
11:08Now we have removed it completely.
11:10We have removed the LGBT change.
11:12We have removed the reactor change.
11:14Now I am turning it on.
11:16See, I am turning it on.
11:18It is on with the remote.
11:20Now I will turn on the compressor
11:22and show you completely.
11:24And it has a little work.
11:26I will tell you that too.
11:28Because this kit was sent to be repaired.
11:30This kit was sent to be repaired.
11:32This was sent to the dealer.
11:34The dealer,
11:36his mechanic,
11:38this is the same box.
11:40There were four kits in it.
11:42Because this one was dead from there.
11:44And these four
11:46are complete.
11:48Now as soon as the kit is on,
11:50I will show you.
11:52The kit has been repaired.
11:56Our compressor is on.
11:58See.
12:00This compressor is on.
12:02This kit is complete.
12:04We have repaired it.
12:06The kit is ok.
12:08Now we will do it with the remote.
12:10See, it is open.
12:12We will not run it for long.
12:14If you like our video,
12:16if you like our work,
12:18then subscribe to our channel
12:20and like and share the video.
Comments