00:00Assalamu alaikum friends, nowadays Android TV is in everyone's home and we all use it.
00:08But recently I made a video about TCL, Wi-Fi Turning Off Issue.
00:17You must have seen that when we turn on the Wi-Fi, the option suddenly turns off.
00:25Or if it is turned on, then it cannot connect with our network.
00:30So I got a lot of messages on this video.
00:34Many friends' problems have been solved.
00:37In that, I told 2-3 tricks that if you do them, your problem will be solved.
00:42But a lot of friends are having a problem that they say that our problem has not been solved.
00:49The same is the same.
00:51So friends, I will tell you the reason for not solving the problem.
00:55So you can go to the nearest TCL service center in your city and solve this problem.
01:03I will tell you what is the fault.
01:07So let's start.
01:09Music
01:19So friends, we have TCL LED.
01:23In this, the fault related to Wi-Fi is coming that we turn on the Wi-Fi option.
01:32But it turns off in a few seconds.
01:36Or if it is connected, then it cannot connect with our network.
01:41So what are the reasons?
01:43It is not necessary that if you have TCL LED, then your problem will be solved.
01:48Rather, if you have TCL, Orient, EcoStar, Haier, OnePlus, Xiaomi, any LED.
01:57So you can apply this trick.
02:01If your problem is solved, then it is fine.
02:04Otherwise, the problem that is coming, I am going to discuss with you.
02:09So here, this is our network and internet setting.
02:13Often the problem is that we get the option of Wi-Fi on here.
02:19When we turn it on, it turns on.
02:23And after a while, it turns off.
02:29Now this problem, I told you that you reset the LED first.
02:35After resetting, there is a 50% chance that this problem of your LED will be solved.
02:41If this problem is not solved.
02:43So friends, this Wi-Fi module is installed in your LED.
02:48Often the problem comes in this module.
02:53So you will have to change this module.
02:56You can go to the nearest service center and change this module.
03:00But I have disabled it.
03:03Now I will enable it and let you check.
03:06How will this problem be solved?
03:09The second thing that you can also check.
03:12Here, these prints.
03:17You can't see any carbon or shorting in them.
03:22If these prints are clean, then 100% your module is broken.
03:30But our module is fine.
03:32So I will insert the cable.
03:53So I have connected the device.
03:56Let's turn on the LED.
03:58After turning it on.
03:59Now when I turn on its Wi-Fi.
04:02So our networks will be shown.
04:07So you can see that my module is connected to it.
04:22Thank you for watching.
Comments