Cosplay wings tutorial
- 6 years ago
This is a reupload of a video I made a while back talking about a set of wings I made for cosplay/costuming. If you have any questions, feel free to ask. Enjoy :-D\r
Lets see. Supplies= 1-8ft 1.25 in pvc, \r
1-10ft 1/2 in pvc, \r
2- 1ftx1ft pices of plywood, \r
2 1.25in 45 degree pvc elbows, \r
hanger strap, \r
2 pulleys (the ones I bought had hooks attached that were a pain to remove), \r
paracord, \r
hoops or something to use as pulls, \r
straps (they sell straps for securing things down that have the clamps on them, near the paracord I think), \r
and screws. 2 2in for the pulley axles, 2 1in for the paracord anchors, and screws for securing the hanger strap and wings to the plywood, and for holding the 2 plywood pieces together. (have the nuts for all these) \r
Tools= saw (I use a jigsaw) drill with bits, screwdriver \r
I THINK that covers supplies.\r
Twitter: @SilverGreg78\r
Facebook.com/UncleSilverGaming
Lets see. Supplies= 1-8ft 1.25 in pvc, \r
1-10ft 1/2 in pvc, \r
2- 1ftx1ft pices of plywood, \r
2 1.25in 45 degree pvc elbows, \r
hanger strap, \r
2 pulleys (the ones I bought had hooks attached that were a pain to remove), \r
paracord, \r
hoops or something to use as pulls, \r
straps (they sell straps for securing things down that have the clamps on them, near the paracord I think), \r
and screws. 2 2in for the pulley axles, 2 1in for the paracord anchors, and screws for securing the hanger strap and wings to the plywood, and for holding the 2 plywood pieces together. (have the nuts for all these) \r
Tools= saw (I use a jigsaw) drill with bits, screwdriver \r
I THINK that covers supplies.\r
Twitter: @SilverGreg78\r
Facebook.com/UncleSilverGaming