Skorpion 350 is a drum model made in the form of a trailer, meant for collaboration with a min 100 KM farm tractor. The drive is transmitted from PTO shaft of a tractor with the speed of 540 revolutions per minute. The chipper is equipped with hydraulically folding loading table, in which a feeder track is installed. Pressing and waste-wood feeding into the cutting system is performed by toothed roll installed in a rocker. Both – the crawler and feeding roll are propelled by two hydraulic motors powered by a hydraulic pump installed on board. A sector-type drum with four cutting knives (one rotation of the drum for one full cut) allows to achieve a very high possibilities of the chipper with a relatively low power of the tractor. Knives can be sharpened several times, assuring theirs long-term use. Installed screen 50 x 50 mm ensures high regularity if chips. Chips are ejected by a fan through a high rotary chimney, enabling loading the chips on a trailer. The construction of the chipper is set on a single axial chassis that enables the device to be towed behind a tractor on forest and field roads. Innovative solution of the lateral position of the feeding table enables simultaneous transport of chipper and trailer with a tractor. Due to large size of the material to be chipped, the machine can be equipped with a hydraulic mounted crane. As a standard, the chipper is also additionally equipped with an electronic system of work control, automatically protecting the propulsion system of the machine against overload/excessive duty through temporary stopping the feeding unit.
Weight 2400 without hydraulic crane [kg] Branch diameter logs up to 250[mm] No of knives (depends on the version of cutting drum) 4 cutting + 1 counter knife Feeding speed up to 21[m/min] Chipping capacity up to 16 [stère meters/h] Width of chips up to 28 mm depends on material Drum diameter 468[mm] Screen 50 x 50[mm] Hopper dimensions (width x height) 386 x 320[mm] Min. power of traktor 100[hp]
Optional equipment: •Extension of the ejection tube. •Foldable ejection tube with automatic, motorized control in range of 210. •Hydraulic crane.
Chips made by Skorpion 500 RB can be used as a solid fuel for heating (burning in ovens/stoves), as a raw material for production of paper, furniture boards, and after additional disintegrating in a hammer mill for pellets and briquettes production.
Purchase of a chipper Skorpion 350RB is the perfect solution for companies and businesses which develop their business in a modern and environmentally friendly direction.
