- 12 minutes ago
click
Category
📺
TVTranscript
00:00Now we're ready to make the legs and posts of our chair using the Binford 6100 variable speed wood lathe.
00:06That's right.
00:07Now we first use a rough gouge to take off the square edges.
00:11Then we'll use a one-half inch round nose to start shaping our piece.
00:15Marv, bring the camera and let's take a look at this thing.
00:17There are various types of patterns to shape your legs, or you can do it freehand.
00:23It's a very difficult skill to master, and you might want to practice on a spare piece of wood.
00:28Right. That's good advice. I'll give you more good advice.
00:31Always think safety when working with a spinning lathe.
00:34You notice I didn't wear a necktie. I've got a lot of letters about this.
00:36You want nothing hanging out, and no loose clothing.
00:39Possibility.
00:41Let me finish.
00:45Subtiny.
00:56If you get too close to a lathe, you could lose an article of clothing.
01:01Is it a little chilly in here?
01:04Hi, and welcome to a special live edition of Tool Time.
01:07Today, we're going to show you the operation of a 25-ton hydraulic truck crane.
01:13Oh, oh, oh, oh, oh.
01:15That's right, Tim.
01:16We're going to be using this crane to pick up and set a three-ton beam,
01:20which we used as a diagonal brace, also known as a kicker.
01:24So you could call this a kicker-picker-upper.
01:27This is a lever right here that raised the beam, right?
01:29Yes, that's it. That's right.
01:30But don't... No, no, Tim.
01:31I'm doing it. I got it. I got it.
01:33I'm beaming up, Scotty.
01:38Okay, Al. Now what?
01:40Okay, hit the foot brake.
01:42Lock the beam in place.
01:44Right now.
01:46Okay, now.
01:47Get out of the cab. Tim's getting out of the cab.
01:49And I'm going to move the beam right into place.
01:52Pop, as you're going out, be careful.
01:54Don't hit the brake release with your foot.
01:55Okay.
01:56But this is the lever that would swing the beam.
01:58Yes, it is. But Tim... Tim!
02:02Al, you all right?
02:03Mark, look out!
02:08Tim, your foot! Don't hit the brake release!
02:11What?
02:30Cutting that data, we're going to be using something that looks a lot like this.
02:33Here you go, Tim.
02:33Ha, ha.
02:38This is the Binford Mach 3 Super Plunge Router.
02:42Oh, a thing of beauty, isn't it?
02:44Three horsepower motor, variable electronic speed control, and adjustable depth stop system.
02:49When using a router, you want to use a real steady hand.
02:53Well, you might want to use the guide arm, Tim, so it doesn't get away from you.
02:56Well, you don't always have to use the guide arm if you have a steady hand.
03:00Well, if you want a straight line, Tim.
03:02Al, I've been doing this for years, all right?
03:05Totally take away.
03:07Okay.
03:08Start our cut, set your depth gauge, and get going.
03:29Perfect, Al.
03:30Hi, everybody.
03:31I'm Tim Taylor, and welcome to this special edition of Tool Time here at our project house
03:35in beautiful Kego Harbor Heights.
03:37Howdy, Al.
03:38Howdy, Tim.
03:39Al, what are we doing today?
03:40Well, Tim, we'll be expanding the Ingram's living room out here onto the porch.
03:45But first, we get to dismantle the existing porch.
03:48We'll be carting the debris away in this.
03:50The beautiful Tool Time truck, blood, sweat, and gears.
03:55Ah-ha.
03:57This is not your standard Detroit issue.
03:59We've made a few engine modifications.
04:02Of course, when you say we, you mean you.
04:08I'll try it, Al, because if I left it up to you, we'd be on a skateboard and a moped.
04:15Ho, ho, ho, ho, ho, ho, ho, ho.
04:17Hear that?
04:18That's a big block Chevy 454, two four-barrel carburetors nestled on aluminum high-rise manifold
04:25headers and dual exhaust, huh?
04:29Let's back her into position, Al.
04:30All right.
04:38Uh, we'll be back live right after these messages.
04:41The point I've really been waiting for, the heavy-duty sanding.
04:43And for heavy-duty sanding, we're gonna need a very special tool.
04:46Lisa?
04:46Lisa?
04:50Here you go, Tim.
04:52What do you got there?
04:54Oh, it's a 2100 model electric drum sander, Tim.
04:57That's right.
04:58Four and a half horsepower, patented stabilizer.
05:00Not to mention full swiveling trailing wire support.
05:06Almost more than a man can take.
05:07Oh, oh, oh.
05:09You're welcome.
05:10You might also want to mention, Tim, that this particular sander weighs over 240 pounds.
05:15Oh, could you help me with that?
05:19Put an apron on there.
05:20We'll call it Al's Mom.
05:24Now, because of the weight and the nature of the wood surface, in our case, pine,
05:29I would suggest going with the 2400 RPMs as opposed to the 28.
05:33Thanks for sharing that, Al.
05:35But I think I'm gonna go with 4200 RPM.
05:38Well, Tim, it doesn't go up to 4200.
05:41Does now, my stout little friend.
05:44I rewired it.
05:48Now, when going with a plank forward like this, you want to go with the grain.
06:03How about a little demonstration?
06:05Yeah, this first one, Tim, is a real classic.
06:08It's handmade bamboo.
06:10Look at this.
06:11Boy, that's a good-looking rod.
06:12Yeah.
06:12That's nice.
06:13Yeah, prices for that start at about $800.
06:23Now it's $1,600.
06:25You got two of them.
06:27Now, we have an insurance policy for these little accidents.
06:29Actually, Tim, our insurance canceled after fourth show.
06:33Well, glue it.
06:34What do we got now?
06:36Oh, this next one's my personal favorite.
06:38All right.
06:38This is a Morgan BXL graphite.
06:40Not even you can break that, Tim.
06:42Don't bet on it.
06:43Hey.
06:45Boy, that's a beauty.
06:45Look at that thing.
06:46Yeah.
06:47I bet you get a big old stinky bass on this thing, huh?
06:49Mm-hmm.
06:50Hey, Al, open up.
06:51Come on.
06:52Well, you want to be careful using a graphite rod in a lightning storm because it is an excellent
06:58conductor of electricity.
07:00Oh, yeah.
07:00We've been known to have a lot of big electrostorms right here in the studio.
07:03Well, I'm just saying that if they happen to be in an area that is susceptible to...
07:14I need my super sander, please.
07:17Here you go, Tim.
07:17Here you go, buddy.
07:22Before you sand this table, will you reimburse me?
07:32Well, don't leave it in one spot.
07:37You'll wreck it.
07:39How do you know?
07:48Now all we need is a square peg.
07:52Al, hop in.
07:55And the Binford Power Roofing Nail Gun is my favorite because the new magazine holds
07:59120 roofing nails.
08:01It's enough for a bushel of shingles.
08:04No!
08:08Available at fine hardware stores everywhere.
08:12Marv, get a claw hammer.
08:13Get that out of your thigh.
08:13Get some sab on...
08:16And if it doesn't say Binford on it, somebody else makes it.
08:25I understand that you...
08:27What?
08:30Huff!
08:31Excuse me.
08:32I must be allergic to something in here.
08:34Oh!
08:35Anyway, thanks, Al.
08:36So I understand you do a lot of this trimming by hand.
08:39Yes, I do.
08:39And with pruning shears.
08:42Want me to trim a little bit for you?
08:43You'd better not.
08:44It takes a lot of experience.
08:46But I'll demonstrate some shaping on the elephant with my pruning shears.
08:51Ah!
09:02And there you have it.
09:04Hey.
09:05Very, very interesting, Jim.
09:07And I really appreciate you being here.
09:08And we'll be right back after these messages from Binford Tools.
09:19I'll be right back after these messages from Binford Tools.
09:20I'll be right back after these messages from Binford Tools.
09:21I'll be right back after these messages from Binford Tools.