How to build a box bellows: air when you push AND when you pull.

Day 57 in Tollan. The load is due in 27 days, he has one axe and two knives, and his old air pumps are crushed flat.

The gamer move: patch them up and get back to work. But they leak through every crack, and even when they were new they only blew in puffs. A box bellows blows on the push and again on the pull, and little one-way flaps send both strokes out the same pipe.

How to build a box bellows:
1. Split boards. Shave wedges to a point, start a split with the axe, and hammer the wedges down a straight log. It splits into boards. No saw needed.
2. One-way flaps. Cut four square holes: two in the ends, two into the air channel. Poke two small holes above each one and tie on a thin flap with cord. Air swings it open one way and slaps it shut the other.
3. Build the box. Bottom, two strips and an inside board for the air channel, the two sides, the two ends, then the top. Tie it all with cord, and put pine pitch on every seam: every gap is air you lose.
4. Feather the push board. Pack its edge with Night Watcher feathers so air can't slip around it.

Push, pull, push: the fire never gets a chance to cool. More air means more metal from every smelt.

And down at the river, what's left of his old fish trap.

Episode 23 of Isekai Engineer: Fantasy Survival Guides.
Missed Episode 22? Watch how to read tracks first.
Next episode: How to Build a Fish Weir.
All my links: https://isekaiengineer.com
#isekai #survival #bushcraft #animation #primitivetechnology #howto #fantasy #bellows

Recommended