No single specification covers reinforced industrial overhead door panels. Selection depends on door size, design wind pressure, and standards such as EN 12424 and ANSI/DASMA 108. Panels are usually sandwich structures stiffened with steel members for rigidity, wind resistance, hardware support, and thermal performance.
Panel construction: Common thicknesses are 40, 50, and 42 mm; heavy-duty versions reach 51 mm. Faces are galvanized or pre-painted steel, usually 0.326–0.5 mm thick; heavy-duty skins may require exterior ≥0.40 mm and interior ≥0.38 mm. Cores are generally polyurethane foam at 40–48 kg/m³.
Reinforcement: External galvanized U-bar struts are common, typically 20 gauge (about 0.9 mm) or 18 gauge (about 1.2 mm); severe wind loads may use 2.0 mm steel. Strut number and spacing are calculated from door width and target pressure, often one or more per section. Internal reinforcement may include full-length galvanized steel strips, hidden aluminum or steel profiles, and sub-profiles. Vertical stiles are galvanized steel at least 1.6 mm thick, with 16 gauge for heavy duty. Steel plates, such as 20 gauge, reinforce hinge and bracket points.
Performance and hardware: EN 12424 Class 3 resists 700 Pa; Class 4 corresponds to roughly 118–149 km/h. Under ANSI/DASMA 108, heavy-duty doors may be engineered for 700 N/m² (about 14.6 psf) without permanent deformation or component disengagement under positive and negative pressure. Heavy-duty tracks should be 2.5 mm galvanized steel, versus about 1.8 mm for standard tracks; long-stem steel rollers help keep panels engaged during wind deflection.
Conclusion: Specify door size, target wind pressure or class, panel and steel-skin thickness, strut material/thickness/layout, stiles, hardware reinforcement, and tracks. The manufacturer should verify the design by calculation.
This article is provided by JTJ High-Speed Doors (https://www.jtjdoor.com).