00:05Greetings dear friends. In this video, we decided to test how much aluminum we can obtain by
00:10recycling soda cans. For this, we collected 200 empty cans and compressed them using a
00:16pneumatic press we ordered on eBay for $150. Next, we fed the compressed cans into a DIY shredder.
00:32You wouldn't believe how scary this thing operates. Therefore, under no circumstances
00:37should you attempt to replicate this, as it is very, very unsafe.
00:54Then, we loaded the shredded aluminum into the crucible and heated it to 1,400 degrees Fahrenheit.
01:11We had to remove a significant amount of slag, about 30% of the total volume.
01:16To prevent the metal from overheating and boiling, we had to quickly prepare a mold for casting.
01:22Sprinkle the mold with baby powder and evenly distribute it across the entire surface with a brush.
01:33Next, we fill it with sand. For this purpose,
01:37we have special sand that withstands temperatures up to 1,200 degrees C.
01:51For this purpose, we want to market with합니다.
01:52Both human bodiesloaded their freiwillings,
02:16We carefully remove the master model and heat the sand so that the metal fills all the voids.
02:53The next step is to cut off the pouring part with a bandsaw. We won't need it anymore.
03:06Then, we thoroughly cleaned the blank before painting.
03:48We cut off the top part of the blank using a milling machine. Unfortunately, the width of our machine is
03:54not enough to process the entire blank at once.
03:56So we had to do it in several stages.
04:16We fitted the resulting part to a car wheel and now we can remove the excess.
04:43Use a template for precise drilling of holes for bolts.
05:05Then cut the thread to secure the blank to the wheel.
05:20Move on to assembly. To facilitate the work, it is necessary to lubricate the rubber with a soapy solution on
05:26both sides.
05:27Unfortunately, we don't have specialized equipment, so we have to struggle a bit.
05:40The first section is to do it.
05:41The second section is there.
05:43The third section is to cut the thread back.
05:46This is the third section.
05:47All right?
05:59The third section is to get rid of the bottom part.
06:01The second section is to cut off the nail.
06:01The third section is to cut the thread in the pediatric floor.
06:15Here we decided to add some style, so we removed the inscriptions from our rubber.
06:19We hoped this wouldn't affect the characteristics of the wheel.
06:50We drill holes for the mounting bolts.
06:52And proceed to installation.
06:55Here we go.
07:08Here we go.
07:08Here we go.
07:27Aluminum behaved unexpectedly.
07:29But we didn't plan to ride on such a wheel anyway.
07:33Let's summarize.
07:34From 200 aluminum cans, we obtained 800 grams of pure aluminum and one decorative wheel,
07:41which we will use to decorate the wall of our workshop.
07:43Under no circumstances install homemade wheels on a car.
07:48It is prohibited and absolutely unsafe.
07:50Thanks for watching.
07:52Subscribe to the channel, like, and until the next meeting.