Saltar al reproductorSaltar al contenido principal
The Most Powerful Drill vs. The Hardest Metal 🔩⚙️ #shorts #viral #facts #fyp #curiositiesThis

What happens when a drill capable of drilling through any metal faces a metal that cannot be drilled? In previous competitions, major drill manufacturers had attempted to drill through this ultra-hard metal, but all had failed.

Then, Masanao Iwata, president of a small drill manufacturing company, drew up the plans for a drill that, according to him, could finally defeat it. The problem was that Iwata could not build it by himself. So 76 small and medium-sized companies from across Japan joined forces, and each contributed its own specialized technology.

Iwata’s company manufactured the body of the drill. Other companies drilled holes with great precision into its surface, while others filled them with abrasive grains. But there was a problem.

The abrasive grains had to be firmly attached to the drill. So another company stepped in and used an electroplating technique to firmly attach the abrasive grains to the drill. After three months of work, the ultimate drill was finally completed.

It contained five times more abrasive material than the drill used in the previous competition. Before the showdown, they tested it against a simulated version of the ultra-hard metal, which was even harder than the material used in the previous competition. The result was astonishing.

The drill managed to pierce it and showed barely any wear, but the team developing the metal had also been preparing. After six previous showdowns, Nakagawa had exhausted his ideas and reached a dead end. So the company put his young colleague, Kensuke Matsubara, in charge.

Matsubara took a different approach. The previous team had sacrificed some hardness to make the metal more durable. Matsubara took the opposite path and focused entirely on hardness.

His new metal reached an incredible hardness value of 2334, far higher than any of his previous samples. Now the seventh showdown was about to begin. The metal was 20 millimeters thick.

The drill would win if it completely pierced through the block. The metal would win if the drill stopped or broke. If the metal cracked, it would be a draw.

The competition began. There was no time limit, so both teams could only wait to see which side gave in first. For two and a half hours, the drill continued drilling through the metal.

Then, suddenly, the sound of the drilling changed. The base holding the metal began to rotate. This was the alliance’s secret weapon.

When the drill reached a depth of 10 millimeters, the base would begin to rotate, considerably increasing its cutting ability. But there was a drawback. The additional force could also cause the abrasive grains to come loose.

But then, another strange sound was heard. Was the drill about to break, or was the metal finally giving way? No one knew. Then, the base stopped.

Categoría

🎈
Diversión
Transcripción
00:00What happens when a drill capable of drilling any metal encounters a metal that cannot be drilled?
00:04In the first competition, major drill manufacturers tried to drill into this ultra-hard metal, but everything fell short.
00:10Then Masaneo Iwata, president of a small drill manufacturing company,
00:14He distanced himself from the plans for a drill that, according to him, is finally destroyed.
00:17The problem was that Iwata couldn't build it himself.
00:20Thus, 76 small and medium-sized companies from across Japan joined forces,
00:24and each contributed their own technology.
00:27Iwata's company manufactured the drill body.
00:29Other companies drilled holes with great precision into its surface,
00:32while others filled them with abrasive grains.
00:34But there was a problem.
00:35The abrasive grains had to be firmly attached to the drill.
00:38So another company stepped in and used an electroplating technique
00:41to firmly attach the abrasive grains to the drill.
00:44After three months of work, the final drill was finally completed.
00:47It contained five times more abrasive material than the drill used in the previous competition.
00:51Before the showdown, they tested it against a simulated version of the ultra-hard metal,
00:55which was even harder than the material used in the previous competition.
00:58The result was astonishing.
01:00The drill managed to pierce it and showed barely anywhere.
01:02But the team developing the metal had also been preparing.
01:05After six previous showdowns, Nakagawa had exhausted his ideas and reached a dead end.
01:09So the company put his young colleague, Kintsuk Matsubara, in charge.
01:13Matsubara took a different approach.
01:14The previous team had sacrificed some hardness to make the metal more durable.
01:18Matsubara took the opposite path and focused entirely on hardness.
01:21His new metal reached an incredible hardness value of 2.334, far higher than any of his previous samples.
01:28Now the seventh showdown was about to begin.
01:30The metal was 20 millimeters thick.
01:32The drill would win if it was completely pierced through the block.
01:34The metal would win if the drill stopped or broke.
01:37If the metal cracked, it would be a drawn.
01:39The competition began.
01:40There was no time limit, so both teams could only wait to see which side came in first.
01:44For two and a half hours, the drill continued drilling through the metal.
01:47Then suddenly, the sound of the drilling changed.
01:50The base holding the metal began to rotate.
01:52This was the alliance's secret weapon.
01:54When the drill reached a depth of 10 millimeters, the base would begin to rotate, considerably increasing its cutting ability.
01:59But there was a drawback.
02:01The additional force could also cause the abrasive grains to come loose.
02:04But then, another strange sound was heard.
02:06Was the drill about to break?
02:07Or was the metal finally giving way?
02:09No one knew.
02:10Then the base stopped.
02:11The drill had broken.
02:13Or had it finally managed to pierce through it?
02:15They removed the metal block and turned it over.
02:17And there it was.
02:18The drill had managed to completely pierce through the 20 millimeter block.
02:21The drill had finally defeated the metal.
02:23And surprisingly, the drill itself had barely worn down.
02:26Only the coating on its tip had come off.
02:28The alliance formed by the 76 companies had won.

Recomendada