00:00It all begins with these heavy truck leaf springs.
00:05First, the leaf springs are cut into small pieces using a powerful cutting machine.
00:16These metal pieces are then placed inside a high-temperature furnace.
00:20As the heat rises, the metal becomes red-hot and ready for the next stage.
00:31The heated pieces are then shaped with a powerful hammering machine, forming them into long metal bars.
00:48After shaping, the pieces are collected and placed back into the furnace for another heating cycle.
00:54Once they are heated again, the metal is removed and shaped with the hammering machine into the form of large
01:00scissors.
01:24The newly formed pieces are then taken to a grinding machine, where their edges are sharpened.
01:47Once the cutting edges of both pieces are sharpened, the two pieces are brought together.
01:54In the next step, holes are made through both pieces.
02:10The pieces are heated once again inside the furnace.
02:20Once heated, they go through another grinding stage to sharpen and refine the edges.
02:28Finally, the required bolt is fitted into place, joining the two pieces together.
02:34And just like that, the final metal shears are ready.
02:37From truck leaf springs to powerful metal shears.
02:39And just like that, the final metal shears, the metal shears, the metal shears, the metal shears.
02:39Once that, the metal shears, the metal shears, which
02:40chains across coupleandoms are холод, and the perfect people.
Comments