00:02In this video, I will give a tutorial on how to set up a tent to make it...
00:09as this router is tenda O3 with IP 2.1 and admin-admin settings
00:18OK, let's get straight to the point. First of all, you connect this to a power source.
00:24The internal DC power is this DC then there is PoE written on it, you plug in the LAN cable if
00:35If you don't have a LAN cable, you can make it yourself or check the link in the description.
00:39To make a more powerful or stronger LAN, okay, just plug it in like this
00:48then connect to the PoE LAN or WAN section, it says PoE LAN
00:57OK, like that, then after that, you reset it, hold it for a few seconds, wait until the indicator
01:07full and back again, this is a sign that the reset has been successful
01:12OK, let's wait and hold the reset for a few seconds. OK, that means the reset was successful.
01:21If the reset is successful like that, we can immediately set up the router or access point.
01:28This O3 tent is via this LAN or this LAN, the difference is that with this LAN you can go directly to use it outside
01:36outdoors or outdoor so you set it directly outdoors or outdoor while
01:42If the connection is like this, we can set it up here so it's faster, okay, you guys can connect again.
01:49the LAN cable is here, then insert the LAN into the laptop, sorry, into this laptop
02:07OK, like this, let's go straight to it, after that we set it up on the laptop to manage this O3 tent.
02:18OK, just go straight to the control panel start menu first, then type control panel
02:27OK then go to network and internet go to network and sharing center then select
02:34sync adapter settings then go to your ethernet or LAN adapter right click properties double click
02:43In the IP4 version 4 section, here you enter the IP address of the O3 tent, which is part of
02:52This gateway is the IP of the default device number which is behind 2.1
03:01You can fill in whatever you want, this is the computer's IP address.
03:06and it's like this okay after that okay and okay we wait until we get an IP like this network
03:14for success after success like this just open the Chrome browser or whatever
03:23then type the IP of the O3 tent device, this is 2.1
03:29OK, if you've already done that, just type admin and this is also admin, okay?
03:36So here we will set the router mode, which was WSB mode yesterday, if WSB is connected to
03:44The internet source or gateway must be without cables, if it is a router, it must use cables.
03:50because here if the router mode cannot use the wifi signal or signal from the wireless
03:58and the difference between this and this is the same, the difference is that if this uses connecting it using
04:05a wifi signal or wireless signal while this one only uses cables
04:11and this function is the same as an access point and universal repeater to create new wifi
04:21OK, let's just go straight to the router here, if the router changes this, yes.
04:28The IP address of the LAN is from the gateway, so just leave it at 2.1.
04:33does not have to be the same as the internet gateway source unlike the access point or universal repeater
04:41and this client, this third time, must be the same as the IP of the gateway or internet source
04:49If WSB and this and that have to be different, they can't be the same, so it's simpler and faster to set it up without any hassle.
05:00OK, let's go straight to the router, next DHCP option, if you have PPOE, you have to make it via Mikrotik.
05:10usually used for people who sell wifi or wifi internet vouchers
05:15Since I don't sell internet or sell WiFi signals, I use DHCP to connect to my neighbor's WiFi
05:24DHCP then next
05:25So, this is the SSID name, you can use it to name your new WiFi as you wish.
05:32I'll give this wifi the name komputerX
05:37password komputerX.com
05:44OK, then next and save
05:50okay here we can't connect to the internet
05:54we have to we have to connect the LAN cable to the POE LAN from the O3 tent
06:03I'll just put it outside later so the signal will be stronger
06:12OK, here you can see for yourself
06:15we just connected one SSID by transmitting the signal and around the appearance of the wifi that we made into computerX
06:22but he can't access the internet because he hasn't connected it to another cable
06:27OK, I will try to connect to the modem.
06:30Can it
06:33okay no internet access can't internet
06:36how to get or be able to access the internet
06:40You guys remove this other cable first
06:44okay, you guys take this off
06:51Yes, this is the internet source from Indihome.
06:55jtef609
06:57This is the internet source that we will shoot, namely
07:00the wifi is called SSID one
07:02okay let's connect this
07:04other cables
07:07connect to any port
07:14okay, it's connected
07:17okay this is the cable from earlier
07:19from jtef609
07:21namely the internet source
07:22you connect to the LAN section
07:25OK, you connect this LAN section like this
07:28that's it
07:30now we can go straight to the internet
07:36okay we can go online
07:40test
07:42okay, smooth
07:44Excellent
07:47like that
07:48we test again by entering the JTE modem
07:52internet sources are also available
07:54and we try to enter a different IP
07:57the previous one was 1.1 gateway
08:00now to the modem
08:03to the router I mean
08:06to the Tenda S1 router
08:08U3 tent
08:10Okay
08:10different IP 2.1
08:12which was
08:141.1
08:15okay it worked
08:18connected
08:18like that
08:19use of routers and WISP
08:23if the WISP yesterday
08:25it must use
08:26and cable usage
08:27while the router
08:29must use
08:31cable media
08:32to connect
08:34his
08:36like that
08:38use
08:38or
08:39repeater function
08:41And
08:42Also
08:48WISP
08:50well that's how it is
08:53if WISP
08:54if it was yesterday's WISP
08:56we can connect
08:57the wifi we shoot
09:00without this cable
09:01using a router cable
09:03so we can make a new wifi
09:06with router mode
09:07So
09:08access point
09:09U3 tent
09:11this access point
09:12used to be
09:14router
09:17So this is its function as a router
09:21like that
09:23if client mode
09:24not a router anymore
09:25But
09:25yes
09:26wifi
09:28access point too
09:29not a repeater
09:30this is also not a repeater
09:31nothing
09:32not a router
09:32I
09:34if the access point is not a router
09:37client is also not a router
09:39universal repeater
09:40also not a router
09:42So
09:43if it's these 3
09:44The IP must be the same
09:46and these 2
09:47different IP
09:49like that
09:50the explanation
09:51is it clear enough?
09:53if it's not clear enough
09:54you can ask
09:55in the comments column
09:57Thank You
Komentar