00:00Hi, Assalamualaikum.
00:02We already sent this PCP Science.
00:06We have this.
00:10So I will say that the packing is so much more.
00:18So I will say that the packing is so much better.
00:22So we have to open it.
00:24We have to open it.
00:26This is the case.
00:28So I have to open this PCP bar.
00:31It's a big problem.
00:34Now we can see what the problem is.
00:37This is how I can tell you.
00:40So this is how I can tell you.
00:43So this board is also here.
00:46This board has been here.
00:49So this board has not been made.
00:53I've tried to do this.
00:55If you need to be here.
00:56So I see IC all of these all.
00:59So now we can see it.
01:01Now we can see it.
01:03This PCP has been here.
01:05I have seen it.
01:07I have seen it.
01:09I have seen it.
01:10Here's the TV.
01:12It's there.
01:15This PCP has been here.
01:18This PCP has been here.
01:20I can see it.
01:22So, now we have to repair.
01:25We can see how we can do it.
01:28We can see how we can do it, and then we can see how we can do it.
01:35We can see what we can do and we can see how we can do it.
01:39So, first of all, we can do this.
01:43You can see two hours of resistance.
01:47We can see how we can see how we can do it.
01:57So, here is the number of resistance.
02:03So, here is the number of resistance.
02:10Ic goes to the front door to the front door to the front door to the front door to the front door.
02:17I will do that.
02:22This is the second time.
02:31This is the second time.
02:37So this is a one.
02:38And this one is a monster.
02:41And this is a number.
02:42It's a number.
02:44It's a number.
02:47So now this one is a number.
02:50So we will get this one.
02:52So we will see all the other things.
02:54And then we will see here.
02:56So here it will be.
02:58So here it will be.
03:00yeah
03:02yeah
03:06yeah
03:12yeah
03:26front eyes are damaged.
03:28These are the damage that we have to do certain.
03:30This is the SMB resistance we have not been
03:33to it.
03:35So, I add this to the AC After I can see,
03:37so I can see this and show it,
03:39so I use this to do some of the AC.
03:44So, I'm going to see that our
03:50is on this other way,
03:53I can see this be a SMB S1i.
03:55Then we check with why we should even do that and implement the same thing, so we don't
04:02do that.
04:03So we always do that.
04:05So I just press it again, and I did what I would like to see that.
04:08Yeah, we just press it on our own time, and engage with this.
04:13So I tried to make this mistake, and corporate, and all of this we should have already started
04:20with this position here.
04:22so this is the error. so this is not lagging
04:27so this is the error. so this is the error. so this is not
04:30so this is the issue. so this is that the voltage
04:35has done here so we can discharge it.
04:41I had charge to charge.
04:50Then I will charge to charge,
04:53and I will charge the part of it for the charge.
04:56Now I have to mark it on my side.
04:58We will charge it on our side,
05:00as we have to work on it.
05:02So I will be able to do so far.
05:04This is for this change.
05:07So I will give you my process
05:08this one that I was able to do,
05:09that's very much higher than that. So now we can see here, look at this.
05:16This is a good way. It's not bad. It's not bad. It's not bad. It's not bad.
05:26So, it's not bad. It's not bad. It's not bad. It's not bad.
05:32the
05:59a
06:01c
06:03a
06:05a
06:07a
06:09a
06:11a
06:13a
06:15a
06:17a
06:19a
06:21a
06:23a
06:25a
06:27a
06:29a
06:31a
06:33a
06:35a
06:37a
06:39a
06:41a
06:43a
06:45a
06:47a
06:49a
06:51a
06:53a
06:55a
06:57a
06:59a
07:01a
07:03a
07:05a
07:07a
07:09a
07:11a
07:15a
07:17a
07:19a
07:21a
07:23a
07:24a
07:26a
07:28a
07:30a
07:32a
07:34a
07:36a
07:38a
07:40a
07:42a
07:44a
07:48a
07:50a
Comments