Skip to playerSkip to main content
shidashikai
  • 26分钟前
Avoid pitfalls in drilling preparation—keep these key steps for DTH drilling rigs in mind
Be the first to write a comment
添加你的评论

推荐视频

0:33
接下来播放
Don’t delay major overhauls of your screw compressor
shidashikai
2天前
0:38
Don’t overlook control cabinet maintenance—these points are critical.
shidashikai
1小时前
0:36
Don’t be misled by “oil-free”—remember this key point about air compressors.
shidashikai
14分钟前
0:09
Wow, this thing is thicker than my head and heavier than I am—I can’t lift it anymore. Anyone want it?
shidashikai
23分钟前
0:35
Don’t advance too quickly—be cautious of potential damage to your DTH drill rig
shidashikai
24分钟前
0:37
Air compressor tripping frequently during operation? Watch out for these faults
shidashikai
2天前
0:38
During air compressor inspections, remember these key points—ensuring stable and reliable operation
shidashikai
2天前
0:44
Screw compressor rotor clearance too large? Learn how to quickly identify it.
shidashikai
1周前
0:37
Drilling rig hard to start? The starting capacitor has aged.
shidashikai
1周前
0:42
Want to reduce replacing DTH drill rig wear parts? Keep these tips in mind.
shidashikai
1周前
0:39
Air compressor belt slipping? The tension is insufficient
shidashikai
1周前
0:36
Air compressor oil turned black? It's contaminated with carbon deposits.
shidashikai
1周前
0:38
Piston compressor cylinder overheating? The piston rings are worn
shidashikai
3周前
0:36
Insufficient oil injection in screw compressor? The oil filter is clogged
shidashikai
3周前
0:50
Drilling rig at an iron ore mine worksite.
shidashikai
3周前
0:32
What do you think of the power of our drilling rig?
shidashikai
3周前
0:38
Severe air compressor vibration? It could be due to this small issue
shidashikai
3周前
0:35
Piston compressor crankshaft making unusual noise? The bearing bush is worn
shidashikai
3周前
0:35
Air compressor main unit oil seal is leaking — it has aged and hardened
shidashikai
3周前
0:37
Screw compressor rotor fouling? It could be due to incomplete air filtration.
shidashikai
3周前
0:28
Hand-held rock drill, pneumatic tool
shidashikai
3周前
0:40
The drilling rig's hydraulic valve suddenly failed — clogged by contaminants in the oil.
shidashikai
5周前
0:34
Exhaust temperature exceeds 100°C? The cooling system has a problem.
shidashikai
5周前
0:31
Air compressor noise too loud? Identify the source and reduce it effectively
shidashikai
5周前
0:32
Air compressor filter differential pressure gauge turns red — don't wait for the alarm to sound.
shidashikai
5周前