Skip to playerSkip to main content
shidashikai
  • 2周前
Piston compressor crankshaft making unusual noise? The bearing bush is worn
Be the first to write a comment
添加你的评论

推荐视频

0:44
接下来播放
Screw compressor rotor clearance too large? Learn how to quickly identify it.
shidashikai
5天前
0:37
Drilling rig hard to start? The starting capacitor has aged.
shidashikai
5天前
0:42
Want to reduce replacing DTH drill rig wear parts? Keep these tips in mind.
shidashikai
5天前
0:39
Air compressor belt slipping? The tension is insufficient
shidashikai
5天前
0:36
Air compressor oil turned black? It's contaminated with carbon deposits.
shidashikai
5天前
0:38
Piston compressor cylinder overheating? The piston rings are worn
shidashikai
2周前
0:36
Insufficient oil injection in screw compressor? The oil filter is clogged
shidashikai
2周前
0:50
Drilling rig at an iron ore mine worksite.
shidashikai
2周前
0:32
What do you think of the power of our drilling rig?
shidashikai
2周前
0:38
Severe air compressor vibration? It could be due to this small issue
shidashikai
2周前
0:35
Air compressor main unit oil seal is leaking — it has aged and hardened
shidashikai
2周前
0:37
Screw compressor rotor fouling? It could be due to incomplete air filtration.
shidashikai
2周前
0:28
Hand-held rock drill, pneumatic tool
shidashikai
2周前
0:40
The drilling rig's hydraulic valve suddenly failed — clogged by contaminants in the oil.
shidashikai
4周前
0:34
Exhaust temperature exceeds 100°C? The cooling system has a problem.
shidashikai
4周前
0:31
Air compressor noise too loud? Identify the source and reduce it effectively
shidashikai
4周前
0:32
Air compressor filter differential pressure gauge turns red — don't wait for the alarm to sound.
shidashikai
4周前
0:32
How to choose air compressor lubricating oil for low-temperature environments
shidashikai
4周前
0:37
Drill pipe joints keep leaking air? Fix this area to solve the problem
shidashikai
4周前
0:38
Excessive borehole deviation? The drilling rig was not securely anchored.
shidashikai
4周前
0:37
The drilling rig's pneumatic-electric interlock suddenly failed — the electrical connector was loose
shidashikai
4周前
0:36
The drilling rig fell into the hole because the threads weren't tightened properly.
shidashikai
4周前
0:36
If the drilling rig hammer isn't working, check these three air vents first.
shidashikai
7周前
0:36
Drilling rig bit keeps chipping? You may not have chosen the right model
shidashikai
7周前
0:26
Air compressor filter keeps clogging? The root cause lies in these two points
shidashikai
7周前