Zum Player springenZum Hauptinhalt springen
  • vor 8 Stunden
Unser Blog/Merch Shop:
*https://www.diedampftester.de/

Kleinanzeigen für Dampferhardware, besuchen lohnt sich
**Dampfanzeigen: https://dampfanzeigen.de

**Unser Twitch Kanal: https://www.twitch.tv/diedampftester
**Unser Discord Server: https://discord.gg/XtQ6NTMXJK

Dieses Video hat keinen kommerziellen Zweck und dient nicht der Verkaufsförderung der gezeigten Produkte. Es wird aus rein Interesse gemacht und Handelt sich nicht um Werbung oder des gleichen.
Die Meinung über das vorgestellte Produkt ist rein aus eigenen persönliche Meinung und Daten werden vom Hersteller genutzt die er angibt.

* sind Amazon Affiliate Links
Das heißt wenn ihr drauf geht und über den Link, dieses Produkt kauft. Bekomme ich Provision, keine Sorge der Preis verändert sich nicht ;)
** sind Links wo ihr auf Fremdseiten kommt

Kategorie

🤖
Technik
Transkript
00:00We have here from QP Design we have the gate 2inboard 1rta and let's look at
00:11of course now and will wrap him a round then we will do the whole
00:17Now turn around and then we see we have mtl dlh so dl actually we
00:25We have a 24 mm evaporator head and a single column with two airflow rings.
00:34mtl airflow ring dhl airflow ring then an ultim mtl insert potless deck on gods waves that is
00:46yes quite a lot of holsters to top cap button airflow we have a 15er tip tip mtl a
00:545 10er type type dlh yes I actually also not dlh something completely new what is dlh direct long hit very
01:06interesting so we have a 2 ml septic tank dpt doors then we have a glass with 4 ml tank
01:16a site insert skrivs skrvs wabend with logo flat head krevs hex crop krevs group that is rubber
01:31black o rings was that is rubber what is then still at skrvs okay then as herb bag and the
01:41is Canada and now open the whole thing again and there we see it is
01:50civilized we have hashtag 1172 here you can see the flag of Canada again so
02:00an official card we have a sticker here we have another one here
02:06sticker information only quite a few information and here we have the whole
02:18beautiful pieces inside will now make the light higher so that you can see more we
02:25We have the color black here. We have everything you need logically.
02:32screwdriver then for the hexagon socket we still have a key rubber otherwise what then
02:44Logically, we have the MTL system here, of course, down in the ground. If we now go down
02:55look we even see the serial number hashtag 1172 is the serial number we can of course
03:09really nicely turn it up then we have the upper deck completely with two milliliters for the monthly wake-up call
03:18and then we have here with glass that is tpu that is glass we have the bell including the tank
03:32have and of course the dlh type the dl type which you can also get down the rubber is in the type inside
03:44then if you screw here of course I think that is not possible right now then you can of course
03:53open to fill then we have here the settings where one two three holes are for
04:04mtl and here we have the ring for dl we have only one hole opening so a slot and
04:25Now just see that we get the part down I'll take a look at it we have here
04:31I see a blocking function right now, so it will be very interesting how I can use the part now
04:36open so I have to fix it somehow better because it won't open
05:01now I have to look for myself
05:09oh my god this is hard to get down okay I'm starting to get the greetings
05:28I want to go to dl man
05:53this thing is really hard to get down
06:04Can someone explain why this thing is so hard to get down?
06:29n/a
06:32n/a
06:32because
06:39I
07:02has that I don't want to I'm starting to sweat here I can't get the thing off
07:32So I just took out the rubber
07:41how do you get the part down
07:49right now really how to get that down
07:54they are too strong or too weak
08:01So I'll take a look at that now
08:14I managed it guys it's built like this and doesn't press from there
08:31but you have to get it down like that then you finally have it God's sake
08:36ah and here we have the openings back then the different openings as you can see
08:42We have the dl here we have the mtl so we have to be careful how we
08:47ring now put it back on that means we have to put it on like this but before I do that
08:53I will of course oil the ring spanner
08:58what's inside
09:01so back on it
09:11he's already back he's already on it God's sake you get the crisis first how do you get this
09:20ring underneath already thought that it is from above or something else such a rubber can I put back in there
09:27we are now developing the whole thing a round
09:41and we still have to take care of something here too we have a mouthpiece here
09:50that is the same or not that is the same
10:02The air system is the same we only have a replacement here right now yes then we have the whole thing too
10:17ah my god my favorite troll is back shit it's the wrong troll I'm sorry
10:32So we're going to develop the whole thing now. We need a three-winding here, so on three millimeters
10:46and because I am so good-natured today
10:51I do it by hand
10:57not so good
10:59not so good
10:59What an honor to have you come by before you have your own big appearance as a presenter
11:21so and then we quickly take the pliers here
11:49We can tighten the whole thing here once we have done all this we will
12:02Here we take a snapshot so that we can now
12:07have already tightened it a little bit so then we will see that
12:19that doesn't go that deep here but of course we need the six fight because otherwise it works
12:24So of course not key that means we want to unscrew the key here
12:33can
12:52So then we have this whole thing already then we look at which type which depth do we need
13:00I think we need a 4 because I have this nice part there are the numbers
13:07on it that you know what you need, put it through once and then snip snip off and the part is off
13:22so
13:29but 5 would have been enough we still have to do a little bit higher
13:50so
13:57so
13:59So.
14:29A little bit down so it fits.
14:51So.
15:01Now we can pull it up a bit.
15:02If you do the wrapping yourself, then logically you should also do it a little
15:04go on the path.
15:05Of course that was a little less, it would have been better to cut away a little more.
15:13You can see that right here now.
15:34So, once it's tightened by hand, now align the whole thing so that it's nicely centered.
15:46And now we'll see, we have 0.45 ohms.
15:54I like it, it's exactly how I want it.
15:57And now we're going to add 30 watts.
16:02For going out.
16:07And of course to adjust the winding correctly.
16:12I actually like that.
16:28We now have 6 wraps, so 6 wraps and it fits in.
16:33And I really like that.
16:34So.
16:35I've had some before.
16:36I usually change my diaper 6 times.
16:38Because I have my 6 wraps of wire, I have my 0.43 0.47.
16:46So in this area.
16:48And that's exactly where I have 0.45 now, just as I want it.
16:52And it fits in really nicely.
16:55Also perfectly clean.
16:56I really like that.
16:58So.
16:59Because we have the whole thing now, we have a little bit of a gap over it.
17:10Fits too.
17:11And now we're going to do a round of cotton wool.
17:13Cotton wool, cotton wool, cotton wool, cotton wool.
17:15Cotton wool, that's cotton wool.
17:18So.
17:19Then we have exactly the cotton wool I need.
17:32And we have them now.
17:46The cotton count you see there is just from the winding deck.
17:51That's all there is to it.
17:55So.
18:00The rest comes back.
18:03You can use it again.
18:05Now I'll use a different pair of tweezers.
18:11And now let's smooth out the fiber.
18:36The liquid will naturally pass through the fibers.
18:41So.
18:43Now let's play a round of hairdresser.
18:49And now.
18:50Now.
18:51Now.
18:52Now.
18:53Now.
18:54with it.
18:55Now.
18:56Now.
19:08Then.
19:09And now.
19:09So.
19:10No.
19:15What.
19:16the page already fits
19:46Well, I heard from Richard that he prefers to use a 12-volt car battery
20:16So then we have the whole thing and then we will now use the liquid for a round and the
20:29liquid on it what kind of liquid is on it I will keep from you a little bit
20:38that smells good
20:48yes you are certainly just on the way
20:56yes yes yes that's a surprise that's a surprise
21:05of course the dl system mark have you ever heard of d l h does it tell you what d l h
21:22So now it looks a little bit different but nothing more
21:30yes, it even recognizes
21:48ok I follow myself now why the two not
22:01yes now open in dirich and ok open and closed
22:12yes the whole thing yes thank you thank you thank you and now we are a little bit wiser again
22:25most for our tommy
22:31well but they speak for example quite with dl h directly long high maybe because the mtl is too big with the
22:49three letters as you have to add the dl with an additional letter called hit to it, of course there is still something there that sounds like you can say
23:12would now have my opinion of it
23:19yes no idea it is the cards of the ADI yes we have now the gate here we have now installed it on the Lostweb Telma Quest we have a new coil
23:46This is of course performance adjustment
23:53yes I have to say the weiner so so dhl said that one package will arrive today the other package or will arrive tomorrow funnily enough both packages arrived today
24:03I found it really interesting I found it really interesting
24:14So now if we look at the device we have 0.47 ohms, that says the whole thing and we will now go through it really nicely
24:27blubber blubber blubber blubber
24:43I think we can even go down a bit in performance I'll go down a bit again
24:46I like I like I really like
24:59but we have a train obstacle
25:04We really have a train obstacle. I don't know if you should take out this little yellow rubber piece so that you have a bit more train.
25:17but makes beautiful clouds I like clouds are really beautiful
25:27The mouthpiece takes some getting used to, people, it's really like that for me, it takes some getting used to when you look at how it is, so it really takes some getting used to
25:42takes some getting used to
25:44takes some getting used to
25:45takes some getting used to
Schreibe den ersten Kommentar
Kommentar hinzufügen

Empfohlen