- vor 3 Monaten
Unser Blog/Merch Shop:
*https://www.diedampftester.de/
Kleinanzeigen für Dampferhardware, besuchen lohnt sich
**Dampfanzeigen: https://dampfanzeigen.de
**Unser Twitch Kanal: https://www.twitch.tv/diedampftester
**Unser Discord Server: https://discord.gg/XtQ6NTMXJK
Dieses Video hat keinen kommerziellen Zweck und dient nicht der Verkaufsförderung der gezeigten Produkte. Es wird aus rein Interesse gemacht und Handelt sich nicht um Werbung oder des gleichen.
Die Meinung über das vorgestellte Produkt ist rein aus eigenen persönliche Meinung und Daten werden vom Hersteller genutzt die er angibt.
* sind Amazon Affiliate Links
Das heißt wenn ihr drauf geht und über den Link, dieses Produkt kauft. Bekomme ich Provision, keine Sorge der Preis verändert sich nicht ;)
** sind Links wo ihr auf Fremdseiten kommt
*https://www.diedampftester.de/
Kleinanzeigen für Dampferhardware, besuchen lohnt sich
**Dampfanzeigen: https://dampfanzeigen.de
**Unser Twitch Kanal: https://www.twitch.tv/diedampftester
**Unser Discord Server: https://discord.gg/XtQ6NTMXJK
Dieses Video hat keinen kommerziellen Zweck und dient nicht der Verkaufsförderung der gezeigten Produkte. Es wird aus rein Interesse gemacht und Handelt sich nicht um Werbung oder des gleichen.
Die Meinung über das vorgestellte Produkt ist rein aus eigenen persönliche Meinung und Daten werden vom Hersteller genutzt die er angibt.
* sind Amazon Affiliate Links
Das heißt wenn ihr drauf geht und über den Link, dieses Produkt kauft. Bekomme ich Provision, keine Sorge der Preis verändert sich nicht ;)
** sind Links wo ihr auf Fremdseiten kommt
Kategorie
🤖
TechnikTranskript
00:00What we have here is an atomizer, a self-wicking device.
00:04This is one from Hellvape, a Dead Rabbit RTA Solo.
00:11We'll take a look at that today while we wrap the wound.
00:15We have this one in stainless steel, SS.
00:22Glad that doesn't work.
00:28So.
00:30Stressed once away.
00:33Let's take a look at that.
00:3423.01 is written on it.
00:36There you can see the Dead Rabbit.
00:40Here we have a 24mm diameter single coil RTA.
00:47We have a top interlay honeycup airflow and league age proof.
00:54We have Postless Bulletin Deck.
00:57A push style feeling top cap.
01:02And what about it?
01:03We have the Dead Rabbit Solo RTA.
01:06Then Arcusource.
01:08In the pack.
01:09A bubble glass.
01:10And a user manual.
01:11So.
01:12Then let's see.
01:13I have said.
01:19That will probably come later.
01:20Pull up once.
01:23You can see it again on the side.
01:26Dead Rabbit Solo RTA.
01:29Then.
01:31Now if we open the box completely and really nicely.
01:34And voila.
01:37There he is.
01:41He is not black.
01:42It's yourself.
01:43We have decided.
01:44Yes.
01:45Let's take a color like this.
01:46It's just something different.
01:49And then we'll get this beautiful thing out of here.
01:54And just put it aside.
01:56I need a stand quickly.
01:59I know that I have my feet here.
02:02Where are my feet?
02:03There is a.
02:04There is my stand.
02:05Of course he can put it there.
02:07We have one here too.
02:11Yes.
02:12It is a.
02:1518s.
02:16Which also goes down from 15.
02:18Really great.
02:20Here we have the Bubble Glass.
02:24Now we will.
02:25Get the whole thing out.
02:28Get that out from down there.
02:32So.
02:32We have the user manual here.
02:35Something really fat.
02:36No.
02:36We won't unpack that.
02:38We have one here.
02:40A screwdriver, of course.
02:42We have one here.
02:44Substitute.
02:45Slotted screws.
02:47And so we have.
02:50Inside the thread.
02:52Because it is screwed into the thread.
02:56Completely.
02:56The whole.
02:58And we have here.
02:59One rubber band.
03:02Very important guys.
03:03You always need rubber bands.
03:05Then you are safe.
03:07Yes.
03:07You could say that.
03:08Then you're safe again.
03:10This is the days.
03:11So.
03:13You saw.
03:14We need a screwdriver.
03:16I'm wondering right now.
03:19What a set that is.
03:20Why do I bring another set in there.
03:23Now we can watch.
03:23Where I have the right screwdriver.
03:26I think that should fit.
03:31Then we'll take a look at it in full.
03:36We now have a nice look at this device.
03:40It says so.
03:46On the other hand, we have the dead hare here.
03:51And above we have Hellbake at the mouthpiece.
03:55Of course you can take the mouthpiece out.
03:57Of course you can put other things in there.
04:01In the rubber.
04:03You can try it out quickly.
04:04Whether it works or not.
04:06I should have a type tip somewhere around here.
04:10And yes.
04:10That fits in.
04:12Fits in really nicely.
04:13So, in terms of form, it fits really well.
04:16Look at this for me.
04:17Still looks nice, right?
04:19And made my own 3D printer.
04:21So.
04:23Then slide it over here.
04:26Then you can fill it.
04:29And back again.
04:30And you can even see it when it's being filled.
04:32There's a hole here.
04:33This is really well done.
04:34There's a hole here.
04:34That means the air is going out here.
04:36If you fill it in here.
04:37If you fill it at an angle, for example.
04:39Then the air goes out here.
04:41But you have to be careful that no liquid comes out.
04:45So.
04:48Then we'll unscrew the whole thing.
04:54Then of course there is the airflow.
04:58You can also see the airflow.
05:00that the air goes down to the coil.
05:08It looks really nice.
05:09It's a single coil.
05:19As far as I'm right now.
05:21It should be a single coil.
05:22But it looks pretty much like a double.
05:25You can put the glass down here.
05:26Then you can
05:27you can also get that down.
05:30Now that's really interesting.
05:42Then.
05:43You have to do it differently there.
05:45I don't know.
05:47Yes the ring goes up.
05:48This means that Airflow can
05:50The ring can then be pulled out upwards.
05:53Then you just have to see how you
05:54Uh.
05:56Take a look.
05:59Then you can put the airflow ring upwards.
06:01So.
06:01Then we've already figured that out.
06:03Then you can also see the sliding system.
06:05What it looks like for pushing.
06:08Then you can screw it down again.
06:11So.
06:12And if we put the glass back on.
06:15This is held in place with the rubber band.
06:17And held down here with the rubber.
06:18So.
06:20And because I have my changing deck
06:21of course I don't have it anymore.
06:24Let’s just take
06:24just have a vape again.
06:26Old school.
06:28Purely old school.
06:32So.
06:40As you can see.
06:42So you can screw in and out.
06:44Is complete
06:45on slot variant.
06:46If you just want to have an occasion.
06:49With hexagon socket.
06:50Then you have to unscrew the
06:51and hexagon socket.
06:53That you can exchange them.
06:55Um.
06:56Nothing else will happen.
06:57We will once again
06:58so use ready-made ones.
07:01And that's where we'll stop now.
07:12Yes.
07:12Use Fusat Glätton Toils.
07:18Um.
07:18Of course I have
07:19left the beautiful part here.
07:22Um.
07:22The only
07:23which I'm wondering right now.
07:30Um.
07:31There he is.
07:54Cut down.
07:55Cut down.
07:59I'll take a quick look there now.
08:05How far we can go.
08:16And there are
08:175 mm.
08:19Then we will
08:20otherwise always use.
08:28So.
08:30Once we
08:31Remove the snap fastener.
08:39So.
08:40Heats removed.
08:44Then let's check here.
08:46We will
08:46put it in like that.
08:47That means
08:48I have the one
08:48already finished.
08:50Then we will
08:51unscrew the other one.
08:52a little too high.
09:04Can we again
09:05go down a bit.
09:06So.
09:20So.
09:21Where is there another
09:21Fowl?
09:22No idea.
09:24I wanted to find that.
09:25So.
09:26Then go in.
09:27Our presenter is here.
09:45So folks.
09:46Don't forget.
09:46Everything will already be on there.
09:49Now it is
09:49controlled.
09:56So.
09:56So.
09:57Now we don’t have it
09:59clever.
10:00Just put the stop in.
10:17We go to 3.
10:20If we have a 3-winding.
10:23Then once
10:24New Coil.
10:240.71 ohms.
10:29Respect.
10:301.7 ohms.
10:322.0 ohms.
10:331.7 ohms.
10:342.0 ohms.
10:34Thank you.
11:04As you can see, the way I'm doing it right now is actually how I learned it, folks.
11:20As you can see, I really make sure that it fits, that it is really beautiful from the inside out,
11:30that these points, i.e. the four windings inside, really glow nicely.
11:37The outer one, you don't necessarily have to look to see if it's really real.
11:42We're just going to work quickly with 43 watts.
11:45We have a 0.71 ohm here.
11:48So, we need watts.
11:53What, what's going on here?
11:58So.
12:01How was Watt?
12:02Then, of course, we look at how much you need.
12:16Yes, that should work.
12:20Then I put a little bit of cotton wool over it, take a look.
12:23Then I go over it a little bit like that on the other side.
12:25Simply, really easy.
12:29Pull it there, if there are any that don't fit, then you can remove them.
12:33That it is much nicer.
12:36So.
12:38Let's get that out of the way.
12:39The rest of the cotton comes back.
12:41But, it wasn't completely gone.
12:48We will not, like other people, completely pull a whole strand of cotton through it naturally
12:52and then, no, no, no, no, no.
12:56But wait, stop.
12:59Something is still missing.
13:01For example, if you want to anneal it now,
13:05you can even make the whole thing a little harder, a little bit more discouraging.
13:07That means we're just going to heat things up here.
13:25So.
13:28It's finished.
13:34For example, we always did that earlier.
13:37And take the little tip and turn it.
13:43Turn.
13:44Turn.
13:46Not so easy to get in.
13:49Already on the way that there is a little enough inside.
13:55And if this blocks,
13:58Please don't pull on it any further.
14:00You're ruining everything.
14:02Then that's enough.
14:04Believe me.
14:05That is completely sufficient.
14:06Then it simply turns it back again.
14:14Just spread it out a little bit.
14:17So.
14:18Then.
14:23Just watch it.
14:24You can still use that for the Rüpfloader.
14:27It's not over yet.
14:28As I said.
14:28If it blocks,
14:29then you know you have too much cotton and then less cotton.
14:31That's how it was now, it was a little less.
14:33There was a little more here.
14:35So it doesn't matter.
14:36Because if we pluck over there now.
14:38We are plucking now.
14:38We're going through there now.
14:41Help.
14:41And look, because of the strands.
14:52That everything fits.
14:53That it is beautiful.
14:55Now we do the same on the other side.
14:56We can also do it a little bit like that twice.
15:08That it is really, really beautiful.
15:10So I'd better go over here again now.
15:12Because otherwise it works.
15:16Because if you don't do that.
15:17Then you have the problem.
15:18That you might have some knots in there.
15:19Then you have it or else.
15:21And then it can't flow through nicely.
15:23And that's just it.
15:24You really have to be careful there.
15:26We have to look now too.
15:27How deep we do this.
15:30And I would simply apply the basic rule.
15:32So, for example, you can go in here a little bit like this.
15:35Then you see.
15:36Ah, that's so much.
15:38We'll go from here to above.
15:43Well, okay.
15:45So first I take a look inside.
15:47How it goes deep inside.
15:48And then I know.
15:48Ah, good, okay.
15:49We'll now take the turn into account.
15:51And then a little bit outwards.
15:52And so I know just as well.
15:53Well, okay.
15:59A little over the edge.
16:06So.
16:08Okay, of course you would do it in a foseer-like manner.
16:10So bang, bang, bang, bang, bang, bang, bang.
16:11We don't have to do that.
16:13So.
16:14Of course I can say that too.
16:15Well, okay.
16:16It's not centered now.
16:17Then you just pull it over again very lightly.
16:21That it is then in the middle.
16:23So.
16:23Now don't turn.
16:24Well, I've seen that happen to someone before.
16:26He makes some turns and then puts it in.
16:28And then he wonders why he can't pull it so often so quickly.
16:31Uh, yeah.
16:32Uh, he wants a rotary winding.
16:35Uh, yeah.
16:36Nonsense to the power of three.
16:38You take the whole thing.
16:39Yes.
16:41Then it goes up.
16:49And just put it in here.
16:52And then it just pushes from above.
16:57Do it like this until it's in.
16:58You can do it with the needle.
16:59You can also do it with the tip.
17:00It's just a matter of making sure everything goes smoothly.
17:11Goes through the slot.
17:12So.
17:13Uh.
17:14You have it there, for example.
17:16Yes, we've gone in there now.
17:18Then it's very simple.
17:19She just feels a little bit like that.
17:21It moves very little.
17:22And now you have closed the hole again.
17:25Where you pressed.
17:27Here too.
17:34Here too.
17:34Now when I moved it to the right everything is nicely closed so now I will show you something that I
17:59actually always did in the past when I now find what I am looking for we have
18:04used to be really happy to do it you have this hair here the whole thing takes lighter goes
18:12once over, more not so really so very briefly over people not directly there because otherwise
18:23doesn't work now so now we have really nice everything that goes outwards gone
18:28and then I need that to go away
18:35luck will be on top
18:43and then as you can see the cotton wool is really nice that it is already ready to go, no need to screw it together
19:02and then fill in liquid and then vape immediately forget that it takes a bit that's so this this speedboosting you can say so
19:10that is already finished you can see it then
19:18goes then we have here in so you can move the inside airflow this
19:34and then you have to look where she is and that's how she gets it
19:49so and then you just turn turn not so immediately but really comfortable turn and when he then
20:03You can check if it is properly tightened if he takes the whole thing and turns it once
20:09can turn it off then it fits perfectly so you can then check a little bit if it fits and the whole
20:16please don't turn it to death if you have the ability and really turn it to death
20:20then you have the problem she always gets it down properly
20:23and then zang willi has to come and zang willi has to do that then and then the glass can break
20:30It can break the whole thing so be careful you have the notch here too I think it's great for adjusting
20:37Here you can also use the notch to screw it down if you take it and then screw it down
20:43the same with up here
20:45sees and then lightly on it, she doesn't need anything more
20:49so go there now
20:52call check
20:54still 0.89 ohms
21:00That can happen sometimes, no idea why
21:05doesn't matter
21:08so if I turn the power down to 30
21:16then we will push here once and then we will refill here
21:27bombs bombs bombs bombs bombs stop
21:49then screw it shut
21:53screw shut
21:55yes screw the liquid
21:57logically
21:58So we have everything ready now
22:01and then we will just try the whole thing
22:04So we now have the winding
22:06So I don't understand it myself
22:07So something doesn't fit again
22:09that's another 0.45 somehow yes 0.89 well it doesn't matter
22:19I'll increase the power a bit more
22:28the flow is open
22:48beautiful clouds we make with this thing I must say we make really beautiful clouds
22:52I really like it
23:03pull is also good but could be a bit more so I don't know so I notice a bit of resistance when pulling
23:10a little bit again I notice but I like it, it actually fits we have tank-wise we have to look at it, so in the standard class we have two milliliters, four milliliters, we have in the bubble glass it is a single coal and it is for the
23:40dl and rdl
23:42so now we have rdl
23:44So you can't complain
23:54good part
23:58i like it
24:00I really like it
24:04marked correctly
24:06or not
24:08the camera is trying to fool me
24:23camera doesn't like me right now
24:25doesn't matter
24:26but nice piece
24:27good move
24:28we have a 15 on an 18
24:31tiptip
24:32I will also do a little something else
24:39So clouds can be made well even now at 0.89 ohm on rdl
24:53comes across well, suits me
25:03nice piece
25:05nice piece
25:07Yes
25:08nice piece
25:09Yes
25:10nice piece
Schreibe den ersten Kommentar