00:00Friends we have received a request from a customer that it needs to be upgraded because it had a battery which got damaged and its backup is only for 1 to 2 minutes. After upgrading its backup will become 40-50 minutes.
00:30You can use it after knowing because you are a very smart user, you do it in this way and you also turn on the light and darkness on it, let's quickly do what we do, first of all we have a battery which is lithium fast
01:00Whenever you make a battery for UPS or any other device, first of all you must ensure that it is 3C because its loading and charging capacity is the highest.
01:10And because we will make this battery of 12H, it will give more backup and its life will be at least 8 to 10 years, whereas you get only 1 to 2 years of battery, the cost of installing it will also cost you at least 1000 rupees.
01:40Whether it is a computer or a finance, we can operate it easily, so let us quickly start the process of making it. What do you need to do first of all, you need to take a double sided tape. What do you need to do with the double sided tape, we will do it like this
02:10The tricolor will be different from the other one. If you do not do this, you can do it directly because you will find many batteries like this available online.
02:19Because when the battery is loaded it will heat up and when it is charged it will heat up due to which your battery will get damaged quickly.
02:24If you maintain distance from it, it will be better and its lap will remain more stable, that is why we use double side tape like this in all the cells
02:35In this manner we have used double site cape in all the cells one by one. Now we will use this double site battery.
02:58you can see the
03:06I have to keep doing something now
03:16and positive, negative, positive,
03:21that nugget is like this we will make a series of twelve bolts and then again
03:34will process
03:39Positive Negative
03:46take a look after that
04:05Friends if you like the video then please like and subscribe to the Apisod channel
04:23To do this, now we will take out the upper part of the tab from double and then we will show it in parallel, after shrink we will do parallel.
04:24Time is now to pay attention to friendship, positive, negative and positive should be in front of us.
04:27Now we will take it out and after that we will do it, after that you can do it
04:48Two sites positive negative this positive should be in front
04:52Write it down like this, it's very easy
05:01After that, with the help of tape you
05:07This has to be done in such a way that the battery cells do not move from one place to another
05:26Friends if your battery gets damaged then you can use this lithium phosphite in place of lead acid
05:41This will give you a very good backup
05:42You can see this battery is connected to each other
06:12For this we will have to add a BMS, you can see this is of 30 amperes, which we have here
06:24The BMS you will use will be 30 amperes because this is a UPS, this BMS will be better than this BMS
06:32So for this, first of all we have to do soldering on everything, for this first of all we need to take pressure because giving it a thick layer will not do any harm, what will happen with this
06:44So that it can be stuck on it properly, one by one, like this, friends, we will connect it
07:08Check the connection carefully, never make the connection wrong, if it is done wrong then what will happen is that your battery can die, for that first of all you have to take a shoulder iron and heat it, after heating you can get a good
07:38after that what you need to do is like this
07:55that all shell on the shoulding aron case
08:08That if your soldering iron weighs less than 25 lbs then you will face a lot of problems
08:28so use soldering iron of 60 or 120 watts
08:33After that we will take its connection
08:52You don't have to agree to agree to
08:55go to
08:57you two
08:59give it like this
09:01and full guard
09:02Agarde
09:07Agarde
09:10We will subscribe to it one by one, after that we will scramble it
09:26We will subscribe one by one We will subscribe one by one We will subscribe one by one We will subscribe one by one We will subscribe one by one We will subscribe one by one We will subscribe one by one
09:56Friends, what did we do first? We had done this earlier.
10:22that if you subscribe to us now for 2 days and then you will do the search and never make any mistake while doing it then it will be your victory.
10:45What will we do here, we will take out the terminal positive, when we take out the positive from this side, then we will have to do these two switches, from here it will become six.
10:58So while switching let's quickly summarize turn by turn
11:01Friends, this is how we have connected it, this is our negative, this will become the form of this screw
11:20Here, this will become 6 volts. Here, I will tell you that I have done this from the back of this site. Here, it will be 9 volts. Three volts, this battery has become 12 wash. This is positive and negative. Now, you can see how
11:50To keep it positively we will use double side tape
11:56that aga aga aga come aga aga aga here we are going to do it here you are here
12:26Do it well,
12:30please set it,
12:33here it is yours
12:34B., B., B Mans
12:36You got negative,
12:39This is our positive,
12:40This will become our output and input,
12:42Meaning charging will happen from BC,
12:43And the discharging will be from BC,
12:46This will be positive, this will be negative,
12:48We connect this,
12:49Jhaal Jhaal
13:19Jhaal Jhaal
13:49Jhaal
14:19Jhaal
14:49Jhaal
15:19Jhaal
15:49Jhaal
15:51Jhaal
15:53Jhaal
15:55Jhaal
15:57Jhaal
15:59Jhaal
16:00Jhaal
16:01Jhaal
16:03Jhaal
16:05Jhaal
16:07Jhaal
16:09Jhaal
16:10Jhaal
16:11Jhaal
16:13Jhaal
16:15Jhaal
16:17Jhaal
16:19Jhaal
16:21Jhaal
16:23Jhaal
16:25Jhaal
16:27Jhaal
16:29it
16:31So this
16:35You can see the bolt here, we will also show it in a round manner, this batik is completely ready, we will pack it soon,
17:05Finally my batik is ready, now we are going to assemble it in UPS, before that we will charge it a little with a charger, it will be better,
17:30Negative terminators are negative,
17:35Our batik here is charging for around three amperes, we will let it charge for ten, after that we assemble it in UPS,
17:44When unassembling, be very careful about one weight, this which is outside, you will solder it, not join it by hand and put tape on it, if you do that, your connection will become loose, when load is applied on it, then this thing of yours will break.
18:14You will be able to take it whenever you do it like this, by using soldering iron, you can see it together, this is a nice pair, after that what you have to do properly, in this, you have to put tape so that it does not come together,
18:44You can sell it on the Nugget terminal, we call it Nugget,
19:14After that we cover it with tape, which we cannot separate between ourselves,
19:38So ours is done, okay, we will test it and show it to you,
19:42This has been our switch to turn on,
19:49See, it's on,
19:54We will also show you the load on this,
19:58This is our soubat ball,
20:06Now we have it on the line,
20:12You can see this, if you like this video then please like and subscribe and share it with your friends,
20:22To watch videos like this, stay tuned to our channel, thank you, thank you,
20:27Subscribe, you can get lots of honesty, I think it is best to definitely give you lots of press, Lancash Yellowborah
Comments