Santa Fe 3.5 2005 drive belts replacement

Replacement of belts and steering tensioner eliminated grinding noise.

Transcript

00:00Passenger side. Remove this shield. Then look in the craneshaft. We have two belts.

00:17Bigger belt, smaller belt and all pulley. Remove the tensioner bolt is here. Loosen this

00:37bolt, rotate counterwise this tensioner bolt and remove the pulley completely, remove

00:45the belt. Go to the left side. Loosen this nut and that and that bolt. Then so this nut and

01:11that bolt. Loosen the tensioner bolt. Remove the old small belt. Put the new smaller belt

01:35into this space. Rotate craneshaft clockwise in order to get it on grooves. Then put on the

01:51grooves the bigger blade, the bigger belt. Put on the place this tensioner. Tighten the

02:07bolt. Increase tension of the belt by this tensioner bolt and get everything on

02:23place. Then turn the engine for a few seconds and retighten the belt. That's all.