24. solid edge vent

Solid edge tutorials - Sky High eLearn

7 months ago

solid edge tutorials

Transcript

00:00no no no

00:00fact

00:00yeah

00:01is

00:03good

00:03let's

00:05do

00:06again

00:07of

00:09related

00:10not

00:11I

00:12can

00:15it

00:18I

00:19I

00:20I

00:21and

00:23I

00:24I

00:24do

00:25you

00:26of

00:28you

00:30I will close the sketch.

00:47Finish.

00:48Pencil.

00:49And then the vent command will click.

00:52Click the vent option will pop up.

00:55The ribs are sparse.

00:58The ribs are horizontal lines and blue color.

01:02And the vertical lines are red.

01:06The extension, offset and depth options.

01:09And the drop angle will pop up.

01:11Then we will click OK.

01:13Thickness and sparse.

01:17Click OK.

01:19Then we will select boundary.

01:23We will click OK.

01:27The second option is the direction.

01:30The second option is the shape.

01:33The second option is the shape.

01:35And the horizontal line will select.

01:38Then we will click OK.

01:40The third option is the sparse.

01:43The vertical line will select.

01:45The second option is the shape.

01:47Then we will click OK.

01:49The third option will click.

01:50In our last option is the sixth option.

01:53The last option will mark the direction.

01:56Now we will select the direction.

01:58The direction is the material removed.

02:00You will click down direction.

02:02We will click down direction to remove the step.

02:04Then we select the right.

02:05Then we click OK.

02:06The next option will click here.

02:08here we have 20 options in the rib type and we will show you so we will finish

02:16then we will click edit definition and click on the first option we will click on the

02:22options we will click on the event option we will click on the drop angle we will check

02:29the check box and we will enter the path degree and we will click ok

02:36so here we have the trap angle we will click on the inside and the insert

02:53any options from inside and outside and outward options

03:01foreign

03:08foreign

03:15foreign

03:20foreign

03:25foreign

03:30so this is a length length also so here we can enter

03:36so we can change length wavelength 5mm

03:42so this is our extension

03:47we can change different thickness so here we can change

03:50So this is our extension 5mm

03:53so we can change forth Entonces we can change

04:00He with 20 commands.

04:03If you like, share and subscribe, thank you.

Category

Transcript

Be the first to comment

Recommended